Abstract:As a promising treatment technology for wastewater, the promotion of membrane bioreactors (MBR) is restricted by biological fouling. Among the measures used to mitigate membrane fouling, the addition of powdered activated carbon (PAC) to MBRs has been recognized as an effective practice. However, the effects of PAC dosage on the performance of MBRs that treat highly biochemical influent from wastewater treatment plants remain unclear. In this study, by investigating the treatment of biochemical tailwater by PAC–MBRs, we thoroughly analyzed the effects of PAC dosage on the contamination removal efficiency, membrane operation cycles, sludge mixture properties, and microorganism distributions. The results indicated that the addition of PAC enhanced the removal efficiency of MBRs depending on the contaminant of interest. For example, the removal efficiency of total nitrogen can be boosted from 30 % to 60 % with PAC addition, while the removal efficiencies of total phosphorus were comparable with or without PAC addition. Furthermore, the application of PAC in MBRs can prolong the duration of membranes by suppressing biological fouling. This was supported by the decreased microbial products, reduced smaller solid particles, and stronger stability of sludge particles. PAC addition also boosts the proportion of Proteus and decreases the proportion of Bacteroides , which helps to improve the removal efficiencies of contaminants. Finally, among the PAC dosages tested in our study, 1.5 g/L PAC was proposed as the optimal candidate for treating highly biochemical influents. For example, the corresponding time for transmembrane pressure to reach 0.03 MPa was 19 d at 1.5 g/L PAC, while these periods were 7 and 14 d at dosages of 0 and 0.5 g/L, respectively. Overall, the findings of this study will aid in the selection of optimal dosages for other systems with different types of influents.

Impact of Flocculants on Physical and Chemical Properties of the Activated Sludge in MBR

Flocculants for ameliorating filterability of MBR sludge

Influence of organic and inorganic flocculants on physical-chemical properties of biomass and membrane-fouling rate.

Effect of powdered activated carbon dosage on sludge properties and membrane bioreactor performance in a hybrid MBR-PAC system

Prevent Effect of Membrane Fouling by PAC-chitosan Flocculation

Using Polyaluminum Chloride and Polyacrylamide to Control Membrane Fouling in A Cross-Flow Anaerobic Membrane Bioreactor

The effects of powdered activated carbon or ferric chloride on sludge characteristics and microorganisms in a membrane bioreactor

Effects of the addition of polymeric aluminium on the performance of A/O-MBR

Study on the Influence Factors of MBR-PAC System

Using inorganic coagulants to control membrane fouling in a submerged membrane bioreactor

Effect of Chemical Flocculation Pretreatment on Membrane Fouling in MBR

Evaluating the impacts of a high concentration of powdered activated carbon in a ceramic membrane bioreactor: Mixed liquor properties, hydraulic performance and fouling mechanism

Long-term study on the impact of flocculant addition in a sequencing batch membrane bioreactor

Sludge Aggregation and Biofouling Mitigation in A/O-MBR Treating Anaerobically Digested Swine Slurry with PAC/PAM Flocculation Pretreatment

Effects of microbial flocculant on the dewatering performance of thickened sludge from municipal sewage treatment plants

Effect of Dosing Powdered Activated Carbon on Operational Performances of MBR

Powdered Activated Carbon - Membrane Bioreactor (PAC-MBR): Impacts of High PAC Concentration on Micropollutant Removal and Microbial Communities

Optimization of membrane bioreactors by the addition of powdered activated carbon.

Effects of powdered activated carbon dosage on the performance of membrane bioreactors treating biochemical tail water

Effect of Composite Coagulant on Sludge Performance in MBR Process

Effect and Mechanism of Reduced Membrane Bioreactor Fouling by Powdered Activated Carbon