Effects of Extrusion on Water-Soluble Protein in Desquamated Rapeseed Cake

XIE Tiemin,SHEN Dechao,SUN Peiling

DOI: https://doi.org/10.3969/j.issn.1005-9369.2006.06.011

2006-01-01

Abstract:The influence of extrusion parameters(diameter of die nozzle,temperature of barrel,speed of screw,die size and △ length) on the amount of soluble-protein in rapeseed cake was studied in this paper.Regression equation was also build up in this paper.

What problem does this paper attempt to address?

Influence of Material on Bean Protein Extrusion Texturization

Liu Enqi

DOI: https://doi.org/10.3969/j.issn.1671-9646-B.2007.01.007

2007-01-01

Abstract:Using DS32-Ⅱ twin screw bulking machine,studied the effect of protein,fat,starch and moisture content of the material on the extrusion process and on the textural quality of the product. The result showed that: add 15%~25% protein into the bean cake can facilitate the extrusion texturization;add 5%~7% fat and 20%~25% starch can hasten extrusion stability of the product and extrusion product's sensory evaluation. The proper moisture content of the extrusion product is 45%~55%.
Extrusion Processing of Rapeseed Press Cake-Starch Blends: Effect of Starch Type and Treatment Temperature on Protein, Fiber and Starch Solubility

Anna Martin,Susanne Naumann,Raffael Osen,Heike Petra Karbstein,M. Azad Emin

DOI: https://doi.org/10.3390/foods10061160

IF: 5.2

2021-05-21

Foods

Abstract:For the valorization of oilseed press cakes into food products, extrusion can be used. A common way of applying the protein- and fiber-rich press cakes in directly expanded products is the combination thereof with starch, since starch gives a favourable texture, which correlates directly to expansion. To control product properties like expansion of protein and fiber-rich extruded products, the underlying physicochemical changes of proteins, fibers and starch due to thermomechanical input need to be comprehensively described. In this study, rapeseed press cake (RPC) was extruded and treated under defined thermomechanical conditions in a closed-cavity rheometer, pure and in combination with four starches. The impact of starch type (potato PS, waxy potato WPS, maize MS, high-amylose maize HAMS) and temperature (20/25, 80, 100, 120, 140 °C) on protein solubility, starch gelatinization (Dgel), starch hydrolysis (SH) and fiber solubility of the blends was evaluated. The extrusion process conditions were significantly affected by the starch type. In the extruded blends, the starch type had a significant impact on the protein solubility which decreased with increasing barrel temperature. Increasing barrel temperatures significantly increased the amount of soluble fiber fractions in the blends. At defined thermomechanical conditions, the starch type showed no significant impact on the protein solubility of the blends. Therefore, the observed effects of starch type on the protein solubility of extruded blends could be attributed to the indistinct process conditions due to differences in the rheological properties of the starches rather than to molecular interactions of the starches with the rapeseed proteins in the blends.

food science & technology
Understanding the mechanism for sodium tripolyphosphate in improving the physicochemical properties of low-moisture extrusion textured protein from rapeseed protein and soybean protein blends

Yuanlong Zhang,Feng Shao,Xia Wan,Haihui Zhang,Kai Hu,Meihong Cai,Yuqing Duan

DOI: https://doi.org/10.1016/j.ijbiomac.2024.132656

Abstract:Our previous experiments found that rapeseed protein (RP) has applicability in low-moisture textured proteins. The amount of RP added is limited to <20 %, but the addition of 20 % RP still brings some negative effects. Therefore, in order to improve the quality of 20%RP textured protein, this experiment added different proportions of sodium tripolyphosphate (STPP) to improve the quality of the product, and studied the physical-chemical properties and molecular structure changes of the product to explore the possible modification mechanism. The STPP not only improved the expansion characteristics of extrudates, but also increased the brightness of the extrudates, the rehydration rate. In addition, STPP increased the specific mechanical energy during extrusion, decreased the material mass flow rate. Furthermore, STPP decreased the starch digestibility, increased the content of slow-digesting starch and resistant starch. STPP increased the degree of denaturation of extrudate proteins, the proportion of β-sheets in the secondary structure of proteins, as well as the intermolecular hydrogen bonding interactions. The gelatinization degradation degree of starch molecules also decreased with the addition of STPP. STPP also increased the protein-starch interactions and enhanced the thermal stability of the extrudate. All these indicate that STPP can improve the physical-chemical properties of extrudate.
Effects of Extrusion Process on Food Nutritional Quality

Wang Wei,Liu Enqi

DOI: https://doi.org/10.3969/j.issn.1671-9646-B.2008.03.020

2008-01-01

Abstract:This paper mainly discussed the effects of nutritional properties on extrusion process,and described the effects of extrusion process parameters such as feed speed,feed moisture content,barrel temperature on protein,starch,fat,vitamins,available lysine,activity of urease,revealed the effects of extrusion process on nutritional quality from another perspective.
Study on the Residence Time and Texture Prediction of Pea Protein Extrusion Based on Image Analysis

Qi Wu,Xun Zhang,Fei Gao,Min Wu

DOI: https://doi.org/10.3390/foods12244408

IF: 5.2

2023-12-07

Foods

Abstract:This paper initially involves three main processing parameters: screw speed, feeding speed, and initial material moisture content, exploring the RTD of materials inside the extruder barrel under varying parameters and clarifying the impact of parameter variations on RTD. Finally, machine vision technology was utilized to link extruded product images to texture features, and a texture prediction model based on image features was established using a Back Propagation (BP) neural network. Particle Swarm Optimization (PSO) and Genetic Algorithm (GA) were applied to optimize the BP neural network. The results indicate that the feeding speed has a stronger impact than the screw speed on the extrusion process, and an increase in the initial material moisture content tends to shorten the RTD. Specifically, an increase in screw speed results in a denser product structure, while higher feeding speeds lead to reduced pore size in the microstructure. As the initial material moisture content increased from 55% to 70%, the average residence time MRT decreased from 265.21 s to 166.62 s. Additionally, elevated moisture content causes a more porous microstructure. After optimizing the texture prediction model of extruded products through the application of Particle Swarm Optimization and Genetic Algorithm models, it was discovered that the Genetic Algorithm was more effective in reducing errors (p < 0.05) than the Particle Swarm Optimization algorithm. It was found that the Particle Swarm Optimization model exhibited better prediction performance. The results of the prediction indicated a significant association between the image features of the product and hardness, resilience, and chewiness, as corroborated by correlation coefficients of 0.93913, 0.94040, and 0.94724, respectively.
Optimization of Twin-screw Extrusion Technology of Defatted Corn Gluten Meal by Response Surface-Methodology

Dawei Wang

2011-01-01

Abstract:The objective of the present study was to optimize the process conditions for the modification of defatted corn gluten meal by two-screw extrusion by response surface methodology.The soluble protein content of extruded corn gluten meal was investigated with respect to water content before extrusion,extrusion temperature and screw rotation speed.The results indicated that the optimal twin-screw extrusion conditions were water content of 68%,extrusion temperature of 163 ℃ and rotation speed of 30 Hz(225 r/min).Under the optimal conditions,the soluble protein content of extruded corn gluten meal reached up to 3.43%.SDS-PAGE analysis demonstrated that the molecular weight distribution of soluble proteins in extruded corn gluten meal was in the range of 3500-14300 D,mainly consisting of polypeptides with a molecular weight between 3500 D and 6500 D.Modified corn gluten meal showed an obvious improvement in its physicochemical properties.Therefore,twin-screw extrusion is feasible to produce modified corn gluten meal.
Evaluation of Extruded or Unextruded Double-Low Rapeseed Meal and Multienzymes Preparation in Pigs Nutrition During the Finishing Phase of Production

Peng Xie,HuiLong Huang,XinYang Dong,XiaoTing Zou

DOI: https://doi.org/10.4081/ijas.2012.e34

2012-01-01

Abstract:The aim of this study was to compare the effects of extruded or non-extruded double-low rapeseed meal (DL-RSM) and multienzyme preparation on performance, nutrient digestibility, immune function and antioxidant status of the finishing pigs. Forty-eight pigs (Duroc×Landrace×Yorkshire) with an average weight of 62 kg were randomly divided into four groups with three replicates according to gender. Four diets were formulated to meet NRC (1998) nutrient requirements. Diet 1, based on the corn and soybean meal (SBM), was used as control. Diet 2 used 13% DL-RSM instead of the 11% SBM used in the Diet 1. Diet 3 used 13% extruded double-low rapeseed meal (E-DL-RSM) instead of 11% SBM, and Diet 4 0.03% multienzyme preparation was supplemented in Diet 3. The results showed that replacement of 11% SBM by 13% DL-RSM had no negative effects on performance and nutrient digestibility for finishing pigs. Extrusion and multienzyme preparation also had no beneficial effects on pig performance. However, the concentration of immunoglobulin G (IgG) in serum of DL-RSM treatment was lower (P<0.05) than that of the control, but it increased to the level of control in the treatment of extrusion combined with multienzyme preparation. The diet containing E-DL-RSM combined with multienzyme preparation significantly decreased the malondialdehyde (MDA) content (P<0.05) in serum. It was concluded that DL-RSM was an acceptable alternative to SBM as part of a protein supplement for finishing pig diets. In addition, extrusion and multienzymes preparation were not economically applied in the current study because of their extra cost.
Effect of feed moisture, extrusion temperature and screw speed on properties of soy white flakes based aquafeed: a response surface analysis

Sushil K Singh,Kasiviswanathan Muthukumarappan

DOI: https://doi.org/10.1002/jsfa.7339

IF: 4.1

2015-08-04

Journal of the Science of Food and Agriculture

Abstract:BACKGROUND: Soy white flakes (SWF) is an intermediate product during soy bean processing. It is an untoasted inexpensive product and contains around 51% of crude protein. It can be a potential source of protein to replace fish meal for developing aquafeed. The extrusion process is versatile and is used for the development of aquafeed. Our objective was to study the effects of inclusion of SWF (up to 50%) and other extrusion processing parameters such as barrel temperature and screw speed on the properties of aquafeed extrudates using a single-screw extruder.RESULTS: Extrudate properties, including pellet durability index, bulk density, water absorption and solubility indices and mass flow rate, were significantly (P < 0.05) affected by the process variables. SWF was the most significant variable with quadratic effects on most of the properties. Increasing temperature and screw speed resulted in increase in durability and mass flow rate of extrudates. Response surface regression models were established to correlate the properties of extrudates to the process variables.CONCLUSION: SWF was used as an alternative protein source of fish meal. Our study shows that aquafeed with high durability, lower bulk density and lower water absorption and higher solubility indices can be obtained by adding SWF up to 40%.

food science & technology,chemistry, applied,agriculture, multidisciplinary
EFFECTS OF EXTRUSION TREATMENT ON ENZYMATIC HYDROLYSIS PROPERTIES OF WHEAT GLUTEN

Chun Cui,Haifeng Zhao,Mouming Zhao,Hua Chai

DOI: https://doi.org/10.1111/j.1745-4530.2008.00348.x

2011-01-01

Journal of Food Process Engineering

Abstract:ABSTRACT Degree of hydrolysis (DH), protein recovery (PR), Fourier transform infrared spectroscopy (FTIR), molecular weight distribution and amino acid composition were examined to investigate effects of extrusion treatment on Pancreatin‐induced hydrolysis properties of wheat gluten in the present study. Results showed that extrusion treatment had significant impacts on enzymatic hydrolysis properties of wheat gluten. It not only resulted in significant increases of 19.2% in DH after 36 h of hydrolysis and 13.4% in PR after 60 h of hydrolysis, but also changed considerably FTIR spectroscopy, molecular weight distribution and amino acid composition of wheat gluten hydrolysates. The conformational changes and structural rearrangements of wheat gluten treated with extrusion might modify the catalytic sites of proteases and be responsible for the improvement of enzymatic hydrolysis efficiency of wheat gluten. PRACTICAL APPLICATIONSThere were increasing interests in expanding the usage fields of wheat gluten, as it is available in large amounts and at relatively low cost. However, its usage was limited due to lack of some desirable functional properties. Although enzymatic hydrolysis is able to improve the solubility and develop the emulsifying and foaming properties of wheat gluten, the low enzymatic hydrolysis efficiency remains one of the major problems present in the industrial scale production. Therefore, increasing enzymatic hydrolysis efficiency of wheat gluten gets more important. Our results clearly showed that enzymatic hydrolysis efficiency of extruded wheat gluten was increased significantly. Results from this preliminary study will provide a better understanding on enzymatic hydrolysis mechanisms of extruded wheat gluten and allow the screening of pretreatment method to improve the enzymatic hydrolysis efficiency during the industrial scale wheat gluten hydrolysates production.
Conformational and Functional Properties of Soybean Proteins Produced by Extrusion-Hydrolysis Approach

Wenjun Ma,Baokun Qi,Rokayya Sami,Lianzhou Jiang,Yang Li,Hui Wang

DOI: https://doi.org/10.1155/2018/9182508

2018-01-01

International Journal of Analytical Chemistry

Abstract:The conformational and functional changes of soybean protein after a hybrid extrusion-hydrolysis method were evaluated. Three extrusion temperatures (60, 80, and 100°C) were used prior to enzymatic hydrolysis. The hydrolysis degrees, molecular weight profiles, solubilities, surface hydrophobicities, sulphydryl contents, disulfide bound, water holding capacity, emulsion, and foam properties of the protein isolated from the enzyme-hydrolyzed extruded soybeans were analyzed. It shows that extrusion caused significant changes in the hydrophobicity, molecular weight distribution, solubility, surface hydrophobicity, emulsification activity, and stability of the protein. The increase of molecular weights could be attributed to the formation of protein aggregates during extrusion. Extrusion and enzymatic hydrolysis led to a sharp increase in the number of disulfide bonds with a decrease of the sulphydryl group. The water holding capacity and the solubility of protein increased with the increase of extrusion temperature and hydrolysis time. Extrusion improved the emulsifying activity but reduced the emulsifying stability of the recovered proteins. Extrusion improved the foam capacity but reduced the foam stability of the proteins. The data demonstrated that the extrusion-hydrolysis treatment significantly altered the conformational and functional properties of soybean protein, which may be further optimized for the development of new soy protein ingredient with desired functional properties.
Effects of Twin-Screw Extrusion on Physicochemical Properties and Functional Properties of Bamboo Shoots Dietary Fiber

Qing Ge,Jian-Wei Mao,Chenggang Cai,Jun Huang,Yifeng Zhou,Jilei Fang,Yuxin Sun,Ruyi Sha

DOI: https://doi.org/10.1166/jbmb.2017.1685

2017-01-01

Journal of Biobased Materials and Bioenergy

Abstract:A co-rotating twin-screw extruder was used to study the effect of extrusion processing on nutritional and textural properties of extruded bamboo shoots. The soluble dietary fiber (SDF), insoluble dietary fiber (IDF), total dietary fiber (TDF), swelling capacity, water holding capacity, oil holding capacity, cholesterol absorption capacity, and fat absorption capacity were determined. The results showed that the content of SDF increased, but IDF and TDF decreased upon extrusion cooking. In addition, the dietary fiber in extruded bamboo shoots had higher swelling capacity, water holding capacity, fat absorption the capacity and cholesterol absorption capacity than those of unextruded ones. The results showed that twin-screw extrusion technology has the potential to increase the levels of SDF in bamboo shoots and improve the efficiency of extrusion.
Effect of the condition of spray-drying on the properties of the polypeptide-rich powders from enzyme-assisted aqueous extraction processing

Huan Wang,Yufan Sun,Yang Li,Xiaohong Tong,Joe M. Regenstein,Yuyang Huang,Wenjun Ma,Rokayya Sami,Baokun Qi,Lianzhou Jiang

DOI: https://doi.org/10.1080/07373937.2018.1563104

IF: 3.3

2019-02-08

Drying Technology

Abstract:Enzyme-assisted aqueous extraction processing (EAEP) is an environmentally friendly technology that simultaneously extracts both oil and protein. It has shown to be commercial feasibility for high oil recovery (∼97%) and favorable protein functionality properties. The present study used soy skim, the liquid co-products obtained using EAEP to produce a polypeptide-rich spray-dried powder. The effects of inlet drying air temperature (140 °C, 160 °C, 180 °C and 200 °C), feed flow rate (3, 6, 9, and 12 mL/min), and solids concentration (25%, 30%, 35%, and 40%) on the properties of the polypeptide-rich powders were investigated. Water activity (aw), color characteristics, bulk density, Carl Index (CI), Water Solubility Index (WSI), micro-morphology, peptide distribution, and antioxidant capacity were significantly affected by different spray-drying parameters. The results of antioxidant capacity test showed that the spray drying conditions significantly affected the antioxidant capacity of the polypeptide-rich powders. The polypeptide molecular weight size and distribution, the composition of the peptide chain, and the cross-linking with other substances could all affect its antioxidant capacity. Overall, good quality polypeptide-rich powders in terms of physicochemical characteristics, micro-morphology, and functional properties can be produced by spray-drying at an inlet temperature of 160 °C, a feed flow rate of 6 mL/min, and solids concentration of 35%.

engineering, chemical, mechanical
Preparation and in Vitro Digestibility of Rapeseed Protein

王金梅,张占琴,王学军,汪凯华,袁春新,麻浩

DOI: https://doi.org/10.3321/j.issn:1003-7969.2008.09.003

2008-01-01

Abstract:The influence factors of pH,extraction temperature and ratio of solution to solid for rapeseed protein extraction were optimized by response surface methodology.The in vitro digestibility of soybean protein isolate(SPI),rapeseed protein(PPI),12S-and 2S-rich rapeseed protein(RP-12S and RP-2S) were also investigated by SDS-PAGE and nitrogen release.The results indicated the highest extraction yield(78.85%) of rapeseed protein was obtained,when the rapeseed meal was extracted twice for 30 min at 55.0℃,ratio of solution to solid 19∶1 and pH 12.0.The maximum yield of precipitated rapeseed protein was obtained at pH 5.0.Under the sequential pepsin and trypsin digestion model,the nitrogen releases of PPI,RP-12S and RP-2S were 84.51%,78.33% and 80.39%,respectively,and all were higher than that of SPI.The digestibility of PPI was superior to SPI,and the PPI was an high-quality protein source.
Effect of screw speed and die temperature on physicochemical, textural, and morphological properties of soy protein isolate-based textured vegetable protein produced via a low-moisture extrusion

Ji Sou Lyu,Jung-Soo Lee,Tae Young Chae,Chan Suk Yoon,Jaejoon Han

DOI: https://doi.org/10.1007/s10068-022-01207-8

IF: 3.231

2022-12-02

Food Science and Biotechnology

Abstract:In this study, textured vegetable protein (TVP) based on soy protein isolate, wheat gluten, and corn starch was prepared at a 5:3:2 (w/w) ratio using a low-moisture extrusion process. To evaluate the effects of extrusion parameters, die temperature and screw rotation speed, on the properties of TVP, these two parameters were manipulated at a constant barrel temperature and moisture content. The results indicated that increasing the die temperature increased the expansion ratio while decreasing the density of the extrudates. Simultaneously, increasing the screw rotation speed clearly increased the specific mechanical energy of the TVP. Furthermore, mathematical modelling suggested that the expansion ratio increases exponentially to the die temperature. However, extreme process conditions bring about a decrease in water absorption capacity and expansion ratio, as well as undesirable texture and microstructure. The results suggested that the properties of SPI-based TVP are directly influenced by the extrusion process parameters, screw speed and die temperature.

food science & technology
Extrusion Cooking Increases Soluble Dietary Fibre of Lupin Seed Coat

Liezhou Zhong,Zhongxiang Fang,Mark L. Wahlqvist,Jonathan M. Hodgson,Stuart K. Johnson

DOI: https://doi.org/10.1016/j.lwt.2018.10.018

2019-01-01

Abstract:Extrusion cooking is widely used to improve the functional properties of dietary fibre of food processing byproducts. This study investigated the capacity of extrusion cooking to increase the proportion of dietary fibre in the Australian sweet lupin seed coat which is soluble and modify its physicochemical properties (water binding capacity and water solubility). Fractional factorial design was used to identify which of the extrusion cooking factors most affected seed coat dietary fibre composition and physicochemical properties. Extrusion cooking significantly increased soluble dietary fibre content of lupin seed coat, from 29.03 g/kg dry basis to a maximum of 90.28 g/kg dry basis, while decreasing insoluble dietary fibre content from 898.91 g/kg dry basis to 828.85 g/ kg dry basis. Water solubility increased (4.02-4.47% vs. 5.37-9.64% dry basis) whereas water binding capacity slightly decreased (3.84-3.88 g/g vs. 3.15-3.73 g/g dry basis) after extrusion cooking. The screw speed, total moisture content in barrel and barrel temperature were identified as the most important processing factors. These findings suggest that extrusion cooking could be a practical technology to increase the soluble dietary fibre content in lupin seed coat and enhance health benefits of the seed coat.
Physicochemical and antioxidant properties of extruded Rhodiola as affected by twin-screw extrusion

Yu Zhang,Tie Jin,Gi-Hyung Ryu

DOI: https://doi.org/10.1080/10942912.2023.2174699

2023-02-09

International Journal of Food Properties

Abstract:In order to explore the effect of extrusion operating parameters on the physicochemical and antioxidation properties of the extruded Rhodiola, Rhodiola was extruded as raw material under different moisture content (24, 26, 28%), barrel temperature (120, 130, 140°C) and screw speed (200, 250, 300 rpm) conditions. After extrusion, the water solubility index of Rhodiola was significantly higher than that of raw material, while the water absorption index was significantly lower than that of raw material. In addition, due to Maillard reaction, L* and a* values of color decreased significantly. The extraction rate of soluble substances, rhodioloside, total flavonoids and total phenols of Rhodiola rosea after extrusion were significantly higher ( P < .05 ) than those of the raw material. Both moisture content and barrel temperature had important effects on the total phenolic content and antioxidant activity. At the same time, moisture content also significantly affected the rhodioloside content when the barrel temperature significantly affected the total flavonoid content. Whereas, the screw speed significantly affected the total flavonoid content. In conclusion, the extrusion process facilitated the increase of active ingredients of Rhodiola and significantly enhanced its antioxidant capacity. Graphical

food science & technology
Extrusion Processing of Starch Film

Bing Su,Fengwei Xie,Ming Li,Penny A Corrigan,Long Yu,Xiaoxi Li,Ling Chen

DOI: https://doi.org/10.2202/1556-3758.1617

2009-01-01

International Journal of Food Engineering

Abstract:Processing behaviors of starch film using a twin screw extruder were studied; in particular the effect of processing conditions, such as temperature, screw speed, feeding speed, and water content, on the extrusion torque and die pressure were systematically investigated. A specific focus of this work was to investigate the effect of amylose/amylopectin ratio containing in cornstarch on the film processing and performances. It was found that the processibility was decreased as the amylose content increased. Pre-mixing and equilibration improve the processibility of starch films, especially for the high amylose starches. The high amylose starches need higher moisture content and temperature for film extrusion.
Effect of Enzymatic (thermostable Α-Amylase) Treatment on the Physicochemical and Antioxidant Properties of Extruded Rice Incorporated with Soybean Flour.

Enbo Xu,Zhengzong Wu,Xiaowei Pan,Jie Long,Fang Wang,Xueming Xu,Zhengyu Jin,Aiquan Jiao

DOI: https://doi.org/10.1016/j.foodchem.2015.10.109

IF: 8.8

2015-01-01

Food Chemistry

Abstract:In order to determine the effect of enzymatic extrusion on the physicochemical and antioxidant properties of rice/soybean mixture, different mass ratios (100/0, 95/5, 85/15, 70/30, 50/50 and 25/75%, w/w) were treated with thermostable α-amylase. The reduced special mechanical energy and the enhanced product temperature were closely and regularly linked with the increase of soybean content. The bulk density and water solubility index increased, and the water absorption index and viscosities decreased remarkably after enzymatic extrusion, however, the modification caused by α-amylase were dramatically eliminated with the increase of soybean content to ∼50%. Moreover, the addition of enzyme exhibited an improvement of the total phenolic/flavonoid content (TPC/TFC) and antioxidant capacities compared to traditional extrusion. The TPC/TFC retention of extrudate (ratios of 85/15 and 70/30%) attained over 90%, but dramatically decreased (72.91 and 67.81%, respectively) with soybean added to 75%, probably due to the great reduction of starch substrate for enzymatic hydrolysis.
Effect of Extrusion Treatment on Enzymatic Hydrolysis of Wheat Bran

Eda Aktas-Akyildiz,M. Tugrul Masatcioglu,Hamit Koeksel

DOI: https://doi.org/10.1016/j.jcs.2020.102941

IF: 4.075

2020-01-01

Journal of Cereal Science

Abstract:Although, wheat bran is a good source of dietary fibre (DF), it has certain disadvantages due relatively lower levels of soluble DF. Therefore, in the current study, the effect of extrusion treatment on microstructure and enzymatic hydrolysis of wheat bran was investigated. Extrusion treatment increased fibre solubility at all process conditions and the screw speed was found to be the most effective parameter. Physicochemical properties of bran were affected from extrusion treatments. While the water-binding capacities of extruded brans were lower than that of non-extruded wheat bran, their water solubilities were higher. Enzymatic hydrolysis increased the soluble DF content of the bran samples as compared to those of respective samples at the beginning of incubation. The results showed that extrusion treatment can be used to disrupt the wheat bran microstructure and thus to increase the soluble fibre content. Enzymatic hydrolysis can also be used for increasing solubility further. The outcomes of this study can be utilized for improving the technological functionality of cereal fibres to develop high fibre ingredients for food applications.
Effect of Extrusion on the Polymerization of Wheat Glutenin and Changes in the Gluten Network

Feng Jia,Jinshui Wang,Qi Wang,Xia Zhang,Di Chen,Yu Chen,Changfu Zhang

DOI: https://doi.org/10.1007/s13197-020-04413-6

2020-01-01

Abstract:The changes in the gluten network during extrusion treatment were studied by assessing the polymerization behavior of glutenin. Gluten samples were extruded at different barrel temperatures, screw speeds, and flow rates. The results indicated that high molecular weight glutenin subunits increased while free sulfhydryl groups and low molecular weight glutenin subunits decreased as the screw speeds and flow rates increased during extrusion treatment. Specific β-sheet structures of gluten clearly increased, while α-helices and β-turns fluctuated during extrusion processing, thus forming a tight gluten network. The characteristics of the protein network were evaluated by confocal laser scanning microscopy. The results showed that a homogeneous and denser gluten network was formed at higher extrusion temperatures during the extrusion process, which may be related to the polymerization of low-molecular-weight glutenin subunits. This study provides a theoretical basis for the improvement and regulation of extrusion quality during the gluten extrusion process.

Effects of Extrusion on Water-Soluble Protein in Desquamated Rapeseed Cake

Influence of Material on Bean Protein Extrusion Texturization

Extrusion Processing of Rapeseed Press Cake-Starch Blends: Effect of Starch Type and Treatment Temperature on Protein, Fiber and Starch Solubility

Understanding the mechanism for sodium tripolyphosphate in improving the physicochemical properties of low-moisture extrusion textured protein from rapeseed protein and soybean protein blends

Effects of Extrusion Process on Food Nutritional Quality

Study on the Residence Time and Texture Prediction of Pea Protein Extrusion Based on Image Analysis

Optimization of Twin-screw Extrusion Technology of Defatted Corn Gluten Meal by Response Surface-Methodology

Evaluation of Extruded or Unextruded Double-Low Rapeseed Meal and Multienzymes Preparation in Pigs Nutrition During the Finishing Phase of Production

Effect of feed moisture, extrusion temperature and screw speed on properties of soy white flakes based aquafeed: a response surface analysis

EFFECTS OF EXTRUSION TREATMENT ON ENZYMATIC HYDROLYSIS PROPERTIES OF WHEAT GLUTEN

Conformational and Functional Properties of Soybean Proteins Produced by Extrusion-Hydrolysis Approach

Effects of Twin-Screw Extrusion on Physicochemical Properties and Functional Properties of Bamboo Shoots Dietary Fiber

Effect of the condition of spray-drying on the properties of the polypeptide-rich powders from enzyme-assisted aqueous extraction processing

Preparation and in Vitro Digestibility of Rapeseed Protein

Effect of screw speed and die temperature on physicochemical, textural, and morphological properties of soy protein isolate-based textured vegetable protein produced via a low-moisture extrusion

Extrusion Cooking Increases Soluble Dietary Fibre of Lupin Seed Coat

Physicochemical and antioxidant properties of extruded Rhodiola as affected by twin-screw extrusion

Extrusion Processing of Starch Film

Effect of Enzymatic (thermostable Α-Amylase) Treatment on the Physicochemical and Antioxidant Properties of Extruded Rice Incorporated with Soybean Flour.

Effect of Extrusion Treatment on Enzymatic Hydrolysis of Wheat Bran

Effect of Extrusion on the Polymerization of Wheat Glutenin and Changes in the Gluten Network