Abstract:Abstract Although many experimental researches have been carried out on the effect of different fluxes and the mechanism responsible for the higher penetration in activated TIG welding of magnesium alloy, few works as reported in literatures are available concering the grain refinement and the improvement of mechanical properties of welding joints. This is because the activated flux has very limited or even negative effects on improving the mechanical properties of welded joints. In order to find a method that can improve welding efficiency and mechanical properties of welded joints, the longitudinal alternating magnetic field and NiCl 2 activated flux were used during TIG welding of AZ91 magnesium alloy. The formation, mechanical properties, phase composition and crystal growth pattern of the weld seam were tested and analyzed to study the mechanism. The experimental results reveal that with proper parameter matching (magnetic field and activated flux), larger weld penetration and smaller form factor can be obtained, welding efficiency is improved accordingly, but the form factor with the magnetic field is bigger than that without magnetic field. When the activated flux amount is 3 mg cm −2 with the magnetic field, the optimal value of mechanical properties of welded joint is obtained, tensile strength is 385 MPa, elongation is 13.3%, micohardness is 67 HV, respectively. All of these are better than those without the magnetic field, the optimal activated flux amount is 2 mg cm −2 . The application of magnetic field and activated flux has no noticeable effect on the phase composition of weld seam. Under the combined action of magnetic field and activated flux, the crystallization nucleation condition of molten pool was changed, the grain size was refined, the formation of twins was promoted, and the crystals selectively grew within the basal (0001) plane.

Investigations on Laser-TIG Hybrid Welding of Magnesium Alloys

Investigations on Laser Welding of Magnesium Alloys

Investigation of interfacial microstructure and connection mechanism of magnetic field-assisted magnesium/aluminum laser welding joint

Investigation of Laser-MIG Hybrid Welding of Al-Mg-Si Aluminum Alloy

Investigation of the microstructure and mechanical properties of Mg–Al–Zn alloy joints formed by different laser welding processes

On the heterogeneous microstructure and strengthening mechanisms in a laser welding AZ80 magnesium alloy

Microstructure homogeneity and mechanical properties of laser-arc hybrid welded AZ31B magnesium alloy

Laser-Tungsten Inert Gas Hybrid Welding of Dissimilar Metals Az31b Mg Alloys to Zn Coated Steel

Effect of Al Content in Magnesium Alloy on Microstructure and Mechanical Properties of Laser-Welded Mg/Ti Dissimilar Joints

Enhanced Interfacial Reaction and Mechanical Properties of Laser Welded-Brazed Mg/Ti Joints with Al Element from Filler

Analysis on Welding Characteristics of Ultrasonic Assisted Laser Welding of AZ31B Magnesium Alloy

Welding Characteristics of AZ31B Magnesium Alloy/Stainless Steel Dissimilar Alloys by Dual Beam Laser Welding-Brazing Process

Microstructure and Mechanical Properties of Laser Welded-Brazed Mg/Ti Joints with Az91 Mg Based Filler

Laser Hybrid Welding Processing of Mg-Rare Earth Alloy

Melt Flow and Grain Refining in Ultrasonic Vibration Assisted Laser Welding Process of AZ31B Magnesium Alloy

Dissimilar Joining of AZ31B Mg Alloy to Ni-coated Ti-6Al-4V by Laser Heat-Conduction Welding Process

Laser-arc hybrid welding of AZ31B magnesium alloy by newly-designed beam oscillating pattern

Joining Of Aluminum And Magnesium Via Pre-Roll-Assisted A-Tig Welding With Zn Interlayer

Laser Processing of Mg-10Li-3Al-3Zn Alloy： Part Ⅰ – Microstructure and Properties of Laser Welded Joints

Study on the weld formation, microstructure and mechanical properties of AZ31B Mg alloy in AC/DC mixed gas tungsten arc welding process

Research for microstructure and mechanical properties of AZ91 magnesium alloy welded joint with magnetic field and activated flux