Abstract:Laser welding of magnesium alloy is still challenging because of the frequently occurred defects. In this work, a promising vacuum laser welding technique was used to join AZ31 magnesium alloy. The effect of ambient pressure on weld surface appearances and weld fusion cross sections was symmetrically investigated. It was found that the penetration depth increased and the weld width became narrower with the descending of ambient pressure from 101 kPa to 10 kPa. However, the penetration depth did not increase and even decreased when the ambient pressure further decreased to 1 kPa and 0.1 kPa. In addition, hump defects occurred at lower ambient pressure of 1 kPa and 0.1 kPa. The weld pool and keyhole behaviors were in-site observed using a high-speed camera at various ambient pressures. The results showed that unstable keyhole and turbulent flow were found in the molten pool at 101 kPa. The keyhole became more stable as the ambient pressure decreased from 101 kPa to 10 kPa. When the ambient pressure further decreased to 1 kPa and 0.1 kPa, the liquid metal thickness between keyhole wall and weld pool periphery became very narrow, which sometimes resulted in unstable absorption of the laser energy. Finally, a 10 mm-thick bottom-locking weld was made under vacuum. The average grain diameter of the weld in vacuum is 28.4 μm, which is much lower than 46 μm in atmosphere. The tensile results showed that the average ultimate tensile strength and the elongation of the joints welded in vacuum at 10 kPa was 8.8 % and 44.0 % higher than that of the joints welded in atmosphere respectively. The enhanced mechanical properties were attributed to the reduced porosity and refined microstrustures of the weld joint made under vacuum.

Analysis on Welding Characteristics of Ultrasonic Assisted Laser Welding of AZ31B Magnesium Alloy

Melt Flow and Grain Refining in Ultrasonic Vibration Assisted Laser Welding Process of AZ31B Magnesium Alloy

Effect of Ultrasonic Vibration Assistance on Microstructure Evolution and Mechanical Properties in Laser-Welded AZ31B Magnesium Alloy

Microstructure homogeneity and mechanical properties of laser-arc hybrid welded AZ31B magnesium alloy

Analysis of Microstructure and Mechanical Properties of AZ31B Magnesium Alloy/AA6061 Aluminum Alloy Welded Joint by Ultrasonic Welding

Ultrasonic Welding of AZ31B Magnesium Alloy and Pure Copper: Microstructure, Mechanical Properties and Finite Element Analysis

Effect of nanosecond pulse laser power on welding interface and mechanical properties of AZ31B Mg/6061 Al

Welding Characteristics of AZ31B Magnesium Alloy/Stainless Steel Dissimilar Alloys by Dual Beam Laser Welding-Brazing Process

Formation and mechanical properties of AZ31B magnesium alloy welds by power-modulated oscillating laser

Vacuum laser beam welding of AZ31 magnesium alloy: Weld formability, microstructure and mechanical properties

On the heterogeneous microstructure and strengthening mechanisms in a laser welding AZ80 magnesium alloy

The Influence of Heat and Cryogenic Treatment on Microstructure Evolution and Mechanical Properties of Laser-Welded AZ31B

Laser-arc hybrid welding of AZ31B magnesium alloy by newly-designed beam oscillating pattern

Impact of power modulation on weld appearance and mechanical properties during laser welding of AZ31B magnesium alloy

Investigation of interfacial microstructure and connection mechanism of magnetic field-assisted magnesium/aluminum laser welding joint

Investigations on Laser Welding of Magnesium Alloys

Effect of pulse overlap rate on the microstructure and mechanical properties of laser welds of thin AZ31 magnesium alloy

Microstructural Characteristics and Mechanical Properties of Ultrasonic-Assisted Electron Beam Welding Joints of Rare-Earth Magnesium Alloy

Microstructural Characteristics and Mechanical Properties of Fiber Laser Welded-Brazed Mg Alloy-Stainless Steel Joint

Microstructure – Properties relationship in laser-welded AZ31B magnesium alloy

Effect of preheating temperature on the microscopic structure and mechanical performance of pulsed laser welding in sheet AZ31 alloy