Abstract:Aluminum has become a structural material widely used not only in mechanical and aerospace engineering, but also, more recently, in civil engineering. Because of its structural properties—such as strength, lightness, durability, and fire safety—aluminum, in recent decades, has been increasingly applied to the mechanical and civil engineering industry, including automotive components and large structural constructions. The main objective of the research presented here is to assess aluminum elastic parameters through simple ultrasonic measurements that can be used for in situ civil engineering applications. Experiments were conducted to measure second- and third-order elastic parameters in 6061-T6 aluminum alloy specimens. All measurements were made with the application of simple through-transmission ultrasonic transverse and longitudinal waves in prismatic samples while uniform load was vertically applied. Measurements were taken with all waves transmitted perpendicularly to the applied load direction, shear pulses were polarized in the direction of the load and also perpendicularly to it. Even though the stresses due to the applied loading were relatively low (up to 140 MPa) consistent and continuous variation of the measured ultrasonic velocities with increasing stress was observed. Classical third-order acoustoelastic Murnaghan coefficients l, m, and n were then calculated using the velocity measurements. In the experiments wave velocities were directly calculated from inquiring ultrasonic pulses transmitted and received using pairs of 500-kHz broadband transducers. The experiments showed the feasibility of applying simple ultrasonic apparatuses to assess third-order acoustoelastic parameters for field applications and can be applied in an axially loaded member of any structural material.

Sensitivity of Ultrasonic Attenuation and Velocity Change to Cyclic Deformation in Pure Aluminum

Acoustic Softening and Residual Hardening in Aluminum: Modeling and Experiments

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Strain Ratio Effects on Low-Cycle Fatigue Behavior and Deformation Microstructure of 2124-T851 Aluminum Alloy

Ultrasonic Vibration-Assisted Intrinsic Modeling and Tissue Evolution of 7075 Aluminum Alloy

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

Cyclic Deformation Behavior of A Heat-Treated Die-Cast Al-Mg-Si-Based Aluminum Alloy

Dislocation Density-Based Model for Flow Behavior of a Near-α Titanium Alloy Considering Effects of Initial Lamellar Thickness

Strain Rate Sensitivity and Adiabatic Shear Deformation of an Advanced Al-Mg Alloy

Molecular dynamics study on dynamic response of void-included aluminum under different loading patterns

Experimental Investigation of Second-Harmonic Lamb Wave Generation in Additively Manufactured Aluminum

Effect of Strain Rate and Temperature on Dynamic Mechanical Behavior and Microstructure Evolution of Ultra-High Strength Aluminum Alloy

Cyclic Deformation Leads to Defect Healing and Strengthening of Small-Volume Metal Crystals

Experimental Investigation and FE Analysis on Constitutive Relationship of High Strength Aluminum Alloy under Cyclic Loading

Measuring Dislocation Density in Aluminum with Resonant Ultrasound Spectroscopy

The Influence Of Specimen Thickness On The Luders Effect Of A 5456 Al-Based Alloy: Experimental Observations

Ultrasonic Evaluation of Acoustoelastic Parameters in Aluminum

Damage analysis of aluminum alloy gusset joints under cyclic loading based on continuum damage mechanics

The Effect of Superimposed Ultrasonic Vibration on Tensile Behavior of 6061-T6 Aluminum Alloy

Investigation on Ultrasonic Vibration Effects on the Plastic Flow Behavior of Ti2AlNb Alloy: Johnson–Cook Model

In-situ Study of the Effect of Strain Path Change on Dislocation Boundary Evolution in Commercial Purity Aluminum