Direct Determination of Nitrite Traces in High Ionic-Strength Samples by Electrostatic Ion Chromatography Using Diluted Acid Solutions As Eluent

Wenzhi Hu,Kiyoshi Hasebe,Ming-Yu Ding,Kazuhiko Tanaka

DOI: https://doi.org/10.1007/s002160101092

2001-01-01

Fresenius Journal of Analytical Chemistry

Abstract:An ion-chromatographic (IC) system with high selectivity for separation of nitrite is described. It is analogous to the EIC (electrostatic IC) previously reported and was established using 3-(N,N-dimethylstearylammonio)propanesulfonate (C23H49NO3S, a sulfobetaine type of zwitterionic surfactants) as the stationary phase and dilute aqueous HCl solutions as the mobile phase. Five inorganic anions, sulfate, chloride, bromide, nitrate, and nitrite were chosen as the model analytes and were analyzed using this EIC system. Sulfate was always eluted first, followed by chloride, bromide and nitrate. Nitrite, however, could be eluted either before or after nitrate, depending on the concentration of HCl in the eluent. An elution order nitrate3 mmol L–1 HCl as the eluent. For nitrite the detection limit was better than 2.1×10–7 mol L–1 (100 µL sample injection volume, S/N=3, UV at 210 nm). Bromide and nitrate could also be separated under these HPLC conditions. The detection limit for bromide was 7.2×10–8 mol L–1 and for nitrate 6.5×10–8 mol L–1. Both nitrite and nitrate in real seawater samples were successfully determined with direct sample injection using this EIC system.