Abstract:CO 2 laser rapid ablation mitigation（RAM） of fused silica has been used in high-power laser systems owing to its advantages of high efficiency, and ease of implementing batch and automated repairing. In order to study the effect of repaired morphology of RAM on laser modulation and to improve laser damage threshold of optics, an finite element method（FEM） mathematical model of 351 nm laser irradiating fused silica optics is developed based on Maxwell electromagnetic field equations, to explore the 3D near-field light intensity distribution inside optics with repaired site on its surface. The influences of the cone angle and the size of the repaired site on incident laser modulation are studied as well. The results have shown that for the repaired site with a cone angle of 73.3°, the light intensity distribution has obvious three-dimensional characteristics. The relative light intensity on z-section has a circularly distribution, and the radius of the annular intensification zone increases with the decrease of z. While the distribution of maximum relative light intensity on y-section is parabolical with the increase of y. As the cone angle of the repaired site decreases, the effect of the repaired surface on light modulation becomes stronger, leading to a weak resistance to laser damage. Moreover, the large size repaired site would also reduce the laser damage threshold. Therefore, a repaired site with a larger cone angle and smaller size is preferred in practical CO 2 laser repairing of surface damage. This work will provide theoretical guidance for the design of repaired surface topography, as well as the improvement of RAM process.

Near-Field Modulated Simulation of Repaired Site Contained Crack or Bubble in Fused Silica Subsurface

The Electric Field Modulation by Three-Dimensional Crack on Fused Silica Subsurface

Near-field modulation of lateral cracks

Numerical Simulation of Light Intensity Distribution in Vicinity of Defect on Fused Silica Subsurface

Simulation of Field Intensification Induced by Pit-Shaped Crack on Fused Silica Rear-Surface

Numerical simulation of the modulation to incident laser by the repaired damage site in a fused silica subsurface

Incident Laser Modulation of a Repaired Damage Site with a Rim in Fused Silica Rear Subsurface

Formation Mechanism of Bubbles in the Crack Healing Process of Fused Silica Using a CO2 Laser

Numerical Simulation of the Interaction of Laser-Generated Rayleigh Waves with Subsurface Cracks

Combined Modulation to Incident Laser by Subsurface Crack and Contaminant on Fused Silica

Rear-surface Light Intensification Caused by a Hertzian-conical Crack in 355-Nm Silica Optics

Optical Modulation Study of Repaired Damage Morphologies of Fused Silica by Scalar Diffraction Theory

Numerical Simulation of Light Intensity Distribution in the Vicinity of Three-Dimensional Hertzian Conical Scratch on Fused Silica Subsurface

Repaired Morphology Induced Optical Modulation in Fused Silica Based on Scalar Diffraction Theory

The Electric Field Modulation by Hemisphere Damage Sites in Fused Silica Subsurface

Experiment of Laser Induced Damage Threshold for Different Sub-Surface Cracks on Fused Silica

Combined Studies of Surface Evolution and Crack Healing for the Suppression of Negative Factors During CO2 Laser Repairing of Fused Silica

Finite Element Analysis of Laser-Generated Rayleigh Wave for Sizing Subsurface Crack in Frequency Domain

Optical Modulation of Repaired Damage Site on Fused Silica Produced by CO2 Laser Rapid Ablation Mitigation

Micron-size bubble defects in fused silica and its laser induced damage near 355 nm

Laser Modulation Simulation of Micro-Crack Morphology Evolution During Chemical Etching