Abstract:Rationale: The desire for mass spectrometer portability provides the motivation for simpler, lighter electronics to deliver switched potentials applied to the electrodes of the linear ion trap operated in non-scanning mode. Using a novel method of modelling and theoretical analysis, we simulate the mass analyser performance under these unfavourable operating conditions. Methods: The electrical fields are simulated using the Charge Particle Optics software which employs the boundary element method. The ion trajectories are computed from the ion cage of the EI source to the interior of the trap where the ions are confined. The spatial/temporal ion distributions during injection are calculated from the individual ion trajectories computed with constant time-steps. Due to geometric non-linearities, βy = 0 lines close to the apex of the stability diagram have been computed for different initial positions with zero initial velocities in order to define the acceptable maximum axial extension. Results: The DC potential well depth has been estimated at about 15 eV from the axial velocity distribution, and the minimum time of ion injection at 120 μs from the temporal ion distribution. To ensure a mass separation of one unit and the confinement of the whole of the injected ions, buffer gas cooling is necessary to reduce the trajectory excursion amplitudes to 0.1 and 15 mm in the radial and axial directions, respectively. Conclusions: The portable mass spectrometer is predicted to achieve a mass resolution of better than one mass unit providing that helium buffer gas is used. An additional cooling sequence has to be added prior to moving the operating point toward the apex. Copyright © 2016 John Wiley & Sons, Ltd.

Modeling and Analysis of the Induced Signal Detected in Electrostatic Ion Beam Trap for Mass Spectrometry

Modeling and Optimization of Dual-Cylinder Image Current Detector in Electrostatic Ion Beam Trap for Mass Spectrometry

Modeling and Simulation of Mass Spectrum of Rectangular Ion-Trap

The Electrostatic Ion Beam Trap : a mass spectrometer of infinite mass range

Quantitative Mass Spectrometry by Orthogonal Projection Method with Periodic Signal of Electrostatic Ion Beam Trap

A simple numerical simulation model can elucidate the key factors for designing a miniaturized ion trap mass spectrometer

Mass Analysis Using Collective Interaction of Ions in an Ion Trap

Fourier Transform Ion Trap Mass Analysis by Deciphering Ion Ejection Signals in the Frequency Domain

Theoretical Analysis of the Space Charge Effect in 3D Ion Trap

Computer Simulations of a New Toroidal-Cylindrical Ion Trap Mass Analyzer

An Orbital Trap Mass Analyzer Using a Hybrid Magnetic-Electric Field: A Simulation Study

Simulation Study On Linear Ion Trap With Asymmetric Triangular Electrodes

Analysis of high mass-to-charge ions in a quadrupole ion trap mass spectrometer via an end-cap quadrupolar direct current downscan

Performance assessment of a portable mass spectrometer using a linear ion trap operated in non-scanning mode

The development of charge detection-quadrupole ion trap mass spectrometry driven by rectangular and triangular waves.

A novel method for unambiguous ion identification in mixed ion beams extracted from an EBIT

Numerical modeling of ion transport in a ESI-MS system

Investigation of the Effect of an Octopole Electric Field on a Linear Ion Trap and an Asymmetric Semi-Circular Linear Ion Trap Analyzer.

Design and Performance of Digital Rectilinear Ion Trap Mass Spectrometer

Electron Beam Density Study Using a Portable Slit Imaging System at the Shanghai Electron Beam Ion Trap

Mass Selective Ion Transfer and Accumulation in Ion Trap Arrays.