Abstract:The cavitation damage in the Engine cooling water pump (ECWP) is the key factor that shortens the lifespan of automobile cooling systems, and causes vibration and noise. To improve cavitation performance and external characteristics of ECWP, three optimized models were designed on the basis of WP7 diesel ECWP. The whole flow fields in three models and the prototype pump were numerically simulated, employing the time averaged Navier-Stokes equation, the standard k-ε turbulent model and Zwart-Gerber-Belamri multiphase flow model by ANSYS-CFX software. Pressure distribution, turbulent kinetic energy distribution, bubble volume fraction distribution, external characteristics and cavitation performance of the prototype pump and optimized models were compared and analyzed. The results show that the external characteristics and cavitation performance of the optimized models are significantly better than that in the prototype pump. Through decreasing the inlet blade angle and wrap angle, extending the blade to inlets and extending a certain inclination in the blade, shock loss in blade inlet was reduced and so, the performance of pump will be improved. The flow condition at blade inlet will also be improved greatly, which in turn improves cavitation performance. When reducing the quantity of blades, the excretion coefficient will drop, flow area of blade inlet becomes bigger, but head has a little drop. And the pump optimized by reducing the quantity of blades has the optimal cavitation performance among three optimized models. With the decrease of impeller diameter, the absolute pressure in the critical cavitation point becomes bigger, the inlet bubble volume fraction at the same absolute pressure increases while cavitation performance gets worse. The obtained numerical results were compared with the experimental ones, and the outcome showed the same tendency between the two along with acceptable error.

Optimization design for water buricated bearing clearance of seawater-desalination pump

The Design for the Slipper Pair of the Axial Piston Pump Used as a High Pressure Pump in Seawater Desalination

Fluid-solid coupling analysis for hydrostatic supporting slipper pair of axial piston pump for seawater desalination

Model and Simulation on Flow and Pressure Characteristics of Axial Piston Pump for Seawater Desalination

Simulation on the dynamic pressure and flow of the seawater desalination axial piston pump

Multi-objective Optimization Design of Sliding Bearing of High-speed Centrifugal Pump Based on Lubrication Characteristics Analysis

Virtual prototype technology for axial piston pumps used in seawater desalination

Investigations of the Micro Surface Shape for the Gear-Shaft/journal-bearing Interface in Water Hydraulic Internal Gear Pumps

Hydraulic Optimization of Super-low Specific Speed Multistage Flameproof Submersible Pump with Inner Motor for Coal Mine

Optimization Design Of The Inner Radius Of The Sealing Surface Of Slipper

The Design of Eccentricity Ratio, Relative Clearance and Length-to-diameter Ratio of Water-Lubricated Journal Bearings under Different Working Conditions

Low Leakage and High Volumetric Efficiency Research of Seawater Plunger Pump

Optimization of a Centrifugal Pump to Improve Hydraulic Efficiency and Reduce Hydro-Induced Vibration

Numerical calculation and optimization designs in engine cooling water pump

Theoretical and Experimental Results of Water-Lubricated, High-Speed, Short-Capillary-Compensated Hybrid Journal Bearings

The Design of Hydrodynamic Water-Lubricated Step Thrust Bearings Using Cfd Method

Numerical analysis of the lubricating gap between the gear shaft and the journal bearing in water hydraulic internal gear pumps

Analysis on Design Parameters of Water-Lubricated Journal Bearings under Hydrodynamic Lubrication

Optimization Study on a Novel High-Speed Oil-Free Centrifugal Water Pump with Hydrodynamic Bearings

Study of CFD Aid Design of Ship Water Journal Bearing of Shaft

Simulation of the Characteristics of the Water-Lubricated Journal Bearing in Twin-Screw Air Compressor