Abstract:Benefitting from high-temperature operating conditions, solid GO oxide fuel cells (SOFCs) exhibit high electricity efficiency and can be coupled with conventional engines such as gas turbines, to achieve cascaded energy utilization. However, high temperature inevitably accelerates material deterioration, and simultaneously complicates the on-line diagnosis of SOFCs. Electrochemical impedance spectroscopy (EIS) is a mature on-line testing technology that is been widely used in SOFC research. Using EIS analyses, researchers can clearly determine the ohmic resistance of pure ion/electron conduction and the magnitude of the polarization impedance of electrochemical processes or diffusion. However, the lack of decomposition of polarization impedance constitutes a limitation for the deeper understanding 'YSZk of SOFC operation. To better utilize information-rich EIS, this work used a typical Ni-Y2O3 stabilized zirconia (Ni-YSZ) anode-supported SOFC and designed a complete set of impedance tests by modifying the test temperature, anode operating atmosphere, and cathode operating atmosphere. In addition, this study combined two advanced impedance spectrum analysis methods: the analysis of differences in impedance spectra (ADIS) and distribution of relaxation time (DRT) methods to allow for a deeper comprehension of the impedance spectrum and obtain the characteristic frequency of each process in the SOFC. Based on the characteristic frequency obtained by the spectral decomposition, this study analyzed and explained the physical or (electro-) chemical origins of the impedance in each frequency band. In addition, the equivalent circuit method (ECM) was adopted to fit the SOFC impedance spectra by 6 (RQ) parallel circuits to summarize the impedance distribution. The ADIS method was more convenient than the DRT method and could be used to initially determine the range of characteristic frequencies. However, it failed to provide a clear decomposition for the high-frequency region of the impedance spectrum. The DRT method can yield a good decomposition of a single impedance spectrum, and the characteristic frequency of Ni-YSZ SOFC was separated into similar to 2, similar to 20, similar to 30, 1 x 10(3)-1.5 x 10(3) , 2 x 10(3)-4 x 10(3), and similar to 4 x 10(4) Hz regions. The highest frequency (similar to 4 x 10(4)) region was dominated by charge transfer impedance at the YSZ/GDC (gadolinia doped ceria) or LSCF/GDC interface. Peaks at 2 x 10(3)-4 x 10(3) and 1 x 10(3)-1.5 x 10(3) Hz correspond to the H-2 electrochemical reaction at the Ni/YSZ/H-2 boundary and O-2 reduction at the LSCF/O-2 boundary, respectively. The impedance at lower frequencies can be explained by diffusion polarization impedance. In this study, similar to 20 Hz corresponds to the cathode diffusion impedance, and similar to 30 Hz corresponds to the anode diffusion resistance. At a frequency of similar to 2 Hz, the impedance magnitude is influenced by both cathode and anode diffusion. The results of this study combined three methods (ADIS, DRT, and ECM) for SOFC impedance investigations, and lays a foundation for future studies regarding SOFC performance degradation and degradation characteristics based on DRT analysis.

Simulation of Two-Dimensional Electrochemical Impedance Spectra of Solid Oxide Fuel Cells Using Transient Physical Models

Direct Two-Dimensional Electrochemical Impedance Spectra Simulation for Solid Oxide Fuel Cell

Simulation of Electrochemical Impedance Spectra of Solid Oxide Fuel Cells Using Transient Physical Models

A General Approach for Electrochemical Impedance Spectroscopy Simulation using Transient Mechanistic SOFC Model

Solid Oxide Electrolysis Cell under Real Fluctuating Power Supply with a Focus on Thermal Stress Analysis

Simulation of Eis Spectra and Polarization Curves Based on Ni/Ysz Patterned Anode Elementary Reaction Models

Implementation of Equivalent Circuit Model of Solid Oxide Fuel Cells for Multi-physics Transients Simulation Using Simulink/SimPowerSystems

Numerical Simulation of Tubular Solid Oxide Fuel Cells

Integrated modeling of electrochemical, thermal, and structural behavior in solid oxide electrolysis cells

A fast regression model for the interpretation of electrochemical impedance spectra of Intermediate Temperature Solid Oxide Fuel Cells

SOFC Modeling and Parameter Identification by Means of Impedance Spectroscopy

Multiphysics Simulation of a Solid Oxide Fuel Cell Based on COMSOL Method

Performance Degradation Analysis of Solid Oxide Fuel Cells Using Dynamic Electrochemical Impedance Spectroscopy

The Observation of Performance Trends by Numerical Simulation with Different Parameters in a Nonlinear Reversible Solid Oxide Cell System

Dynamic Electro-Thermal Modeling of Co-Electrolysis of Steam and Carbon Dioxide in a Tubular Solid Oxide Electrolysis Cell

Differentiation and Decomposition of Solid Oxide Fuel Cell Electrochemical Impedance Spectra

Electrochemical Modeling of the Current-Voltage Characteristics of an SOFC in Fuel Cell and Electrolyzer Operation Modes

Numerical Simulation of Multi-Channel Planar Solid Oxide Fuel Cell Unit by Integrating Continuum Micro-Scale Pen Sub-Model

2D thermal modeling of a solid oxide electrolyzer cell (SOEC) for syngas production by H2O/CO2 co-electrolysis

Numerical Simulation of Cell-to-cell Performance Variation Within a Syngas-Fuelled Planar Solid Oxide Fuel Cell Stack

Simulation and Analysis of Thermal Stress and Sintering Warpage of Planar Solid Oxide Fuel Cells