Abstract:The maximum sensitivity function as the conventional robustness index is often used to test the robustness and cannot be used to tune the controller parameters directly. To reduce analytical difficulties in dealing with the maximum sensitivity function and improve the control performance of the proportional-integral-derivative controller, the relative delay margin as a good alternative is proposed to offer a simple robust analysis for the proportional-integral-derivative controller and the first-order plus dead-time systems. The relationship between the parameters of the proportional-integral-derivative controller and the new pair, e.g., the phase margin and the corresponding gain crossover frequency, is derived. Based on this work, the stability regions of the proportional-integral-derivative controller parameters, the proportional gain and the integral gain with a given derivative gain, are obtained in a simple way. The tuning of the proportional-integral-derivative controller with constraints on the relative delay margin is simplified into an optimal disturbance rejection problem and the tuning procedure is summarized. For convenience, the recommended parameters are also offered. Simulation results demonstrate that the proposed methodology has better tracking and disturbance rejection performance than other comparative design methodologies of the proportional-integral/proportional-integral-derivative controller. For example, the integrated absolute errors of the proposed proportional-integral-derivative controller for the tracking performance and disturbance rejection performance are less than 91.3% and 91.7% of the integrated absolute errors of other comparative controllers in Example 3, respectively. The proposed methodology shows great potential in industrial applications. Besides, the proposed method can be applied to the design of the proportional-integral-derivative controller with filtered derivative which is recommended for practical applications to weaken the adverse influence of the high-frequency measurement noise.

PI Design Method Based on Sensitivity

A Recursive Tuning Approach for the Model-Free PID Controller Design

A Novel Simplified PID Controller Tuning Method for Exact Maximum Sensitivity Specification

Automatic Tuning of Optimal PI Controllers

Robust PID Tuning Using Closed-Loop Identification

A Developed Method of Tuning PID Controllers with Fuzzy Rules for Integrating Processes.

Optimal tuning for PI controller

Closed-loop Identification Based PID Tuning Without External Excitation

A Novel Robust PID Design Method for Uncertain System

Maximum sensitivity (Ms)-based I-PD controller design for the control of integrating processes with time delay

Technical Communique: Optimal tuning for PI controller

Optimal Design of PID Controller Based on Sensitivity Constraint

New PI-PD Controller Design Strategy for Industrial Unstable and Integrating Processes with Dead Time and Inverse Response

Modified PID controller based on H/sub ∞/ theory

Relay Feedback Autotuning Method for Integrating Processes with Inverse Response and Time Delay

A new PID controller design with constraints on relative delay margin for first-order plus dead- time systems

IMC-like Analytical H∞ Design with S/SP Mixed Sensitivity Consideration: Utility in PID Tuning Guidance

Modified PID controller based on H/sub /spl infin// theory

Design and Control Aspect of Segmented Proportional Integral-Repetitive Controller Parameter Optimization of the Three-Phase Boost Power Factor Correction Rectifier

Design And Tuning Method Of Pid Controller For A Class Of Inverse Response Processes

Simple Analytical Min-Max Model Matching Approach to Robust Proportional-Integrative-Derivative Tuning with Smooth Set-Point Response