Abstract:The geometric accuracy of the CNC machine tools determines the quality of the sculptured mechanical parts. Measuring and compensating the geometric errors of machine tools can effectively improve the machining accuracy. However, traditional measurement methods using a double-ball bar (DBB) can only detect the error along the rod length direction and thus require multiple measurements in three orthogonal planes of the machine tool. This work proposes a fast error detection method for the three-axis machine tools using combined double-ball bars (C-DBBs) based on the spatially circular detection (SCD) path. The test path of this method requires the simultaneous linkage of three linear axes of the machine tools and thus could identify 21 geometric errors of three-axis machine tool. Firstly, the measuring principle of the SCD method is introduced, and the mathematical model for detecting 21 geometric errors of the machine tool based on the SCD method is established. Then, the detection experiment based on the SCD method is carried out, and it is shown that 21 geometric errors of the three-axis machine tool are obtained. Finally, the verification experiment using a traditional DBB is conducted to validate the effectiveness of the proposed SCD method. The radial errors in three orthogonal planes measured by traditional DBB exhibit a good agreement with those predicted using 21 geometric errors obtained by the SCD method. Compared with the traditional DBB method, the proposed SCD method could detect 21 geometric errors of three-axis machine tools in a single measurement. This work provides an effective and efficient methodology for detecting all geometric errors of the three-axis machine tool.

Online Inspection System for Geometry Quality of SAW Pipe

The Design of Integrated Monitoring Software Used for Online Steel-measuring System

Evaluation of Pipe Axial Defeat Through the Use of Ultrasonic Guided Wave and Matching Pursuit

Research on the Integrated Ultrasound and Eddy Automatic Inspection System of Seamless Steel Pipe

Panoramic Optical Annular Staring Inspection System for Evaluating the Inner Surface of a Pipe

Application Research of Three-Dimensional Technology Aided Design of New Pipe Inserting into Underground Pipe

Design and Finite Element Analysis of High Efficiency and High Precision Centering Device for Ship Pipe Welding

Local Geometric Measurement for 3-D Curved Micro-Pipe

Machining Precision Online Measurement of Large Span Pin Hole Using Structured Light

3D Reconstruction of Small-diameter Pipes Inner Surface Based on Structural Light

Photoelectric Detection and 3D Reconstruction System for the Inner Surface of Small-Diameter Pipes

Research of Automatic Ultrasonic Test System for Round Bar Flaw

Error Compensation and Design of Roundness Measurement and Stenciling System for Large Diameter Steel Pipe

Mechanism Design for On-Line Profile Measuring System of Spiral Weld Steel Pipe

Implementation and Verification of a Dual-Probe Measurement System for Geometric Form Evaluation of a Ring-Type Cylinder

Study on Steel Pipe Profile Measurement Based on Self-Calibration Algorithm

Fast Detection of Geometric Errors for Three-Axis Machine Tools with Combined Double-Ball Bars Based on Spatial Circle Detection

Welding Quality Monitoring of High Frequency Straight Seam Pipe Based on Image Feature

Full-scale Measurement of CNC Machine Tools

Online approach to measuring relative location of spatial geometric features of long rotating parts

Study on the on-line measurement system for the section dimensions of hot-rolled shaped steel