Abstract:The inconvenient loading and unloading of a long and heavy drill pipe gives rise to the difficulty in measuring the contour parameters of its threads at both ends. To solve this problem, in this paper we take the SCK230 drill pipe thread-repairing machine tool as a carrier to design and achieve a fast and on-machine measuring system based on a laser probe. This system drives a laser displacement sensor to acquire the contour data of a certain axial section of the thread by using the servo function of a CNC machine tool. To correct the sensor's measurement errors caused by the measuring point inclination angle, an inclination error model is built to compensate data in real time. To better suppress random error interference and ensure real contour information, a new wavelet threshold function is proposed to process data through the wavelet threshold denoising. Discrete data after denoising is segmented according to the geometrical characteristics of the drill pipe thread, and the regression model of the contour data in each section is fitted by using the method of weighted total least squares (WTLS). Then, the thread parameters are calculated in real time to judge the processing quality. Inclination error experiments show that the proposed compensation model is accurate and effective, and it can improve the data acquisition accuracy of a sensor. Simulation results indicate that the improved threshold function is of better continuity and self-adaptability, which makes sure that denoising effects are guaranteed, and, meanwhile, the complete elimination of real data distorted in random errors is avoided. Additionally, NC50 thread-testing experiments show that the proposed on-machine measuring system can complete the measurement of a 25 mm thread in 7.8 s, with a measurement accuracy of ±8 μm and repeatability limit ≤ 4 μm (high repeatability), and hence the accuracy and efficiency of measurement are both improved.

Error Compensation and Design of Roundness Measurement and Stenciling System for Large Diameter Steel Pipe

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

A Stitching Linear-Scan Method for Roundness Measurement of Small Cylinders

Design and Finite Element Analysis of High Efficiency and High Precision Centering Device for Ship Pipe Welding

Measuring Error Correction Method During Deflection Measurement Process of the Regular Hexagon Section Shaft Based on Lever-Type Measuring Mechanism

On-line Measurement of Diameter of Hot-Rolled Steel Tube

In-Situ Measurement and Slow-Tool-Servo Compensation Method of Roundness Error of a Precision Mandrel

Local Geometric Measurement for 3-D Curved Micro-Pipe

Full-scale Measurement of CNC Machine Tools

Online Inspection System for Geometry Quality of SAW Pipe

Research on Angle Setting Error of Diameter Measurement Based on Laser Displacement Sensors

Implementation and Verification of a Dual-Probe Measurement System for Geometric Form Evaluation of a Ring-Type Cylinder

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

Study on the Measurement of Global Sizes of Cylindrical Parts Using Talyrond 585LT.

Accurate Inner Profile Measurement of a High Aspect Ratio Aspheric Workpiece Using a Two-Probe Measuring System

A Fast and On-Machine Measuring System Using the Laser Displacement Sensor for the Contour Parameters of the Drill Pipe Thread

Mechanism Design for On-Line Profile Measuring System of Spiral Weld Steel Pipe

Research on Roundness Detection and Evaluation of Aluminum Hose Tail Based on Machine Vision

Deformation mechanism analysis of three-roller continuous and synchronous calibration process of straightness and roundness for LSAW pipes

Research on the on-line measuring method for automated pressure straighter

Nonlinear Analysis and Dynamic Compensation of Stylus Scanning Measurement with Wide Range