Abstract:In this work, the polypyrrole modified with copper phthalocyanine‑3,4′,4″,4‴‑tetrasulfonic acid tetrasodium salt (CuPcTs), named as c-PPy, was mixed with different carbon nanomaterials (single-walled carbon nanotubes (SWCNTs), multi-walled carbon nanotubes (MWCNTs), graphene (G), graphene oxide (GO), signal-walled carbon nanohorns (CNH)) to investigate the influence on the capacitance performance. Herein, compared with the specific capacitance of c-PPy, the c-PPy/SWCNTs exhibited the maximum specific capacitance according to cyclic voltammetry (CV) curves at the scan rate of 1 to 100mVs−1 and the maximum specific capacitance was 238Fg−1 @ 1mVs−1. The c-PPy/MWCNTs exhibited the highest specific capacitance according to galvanostatic charge/discharge (GCD) characteristics at the current density of 0.1 to 1Ag−1, while the c-PPy/SWCNTs exhibited the highest specific capacitance at the current density of 1 to 10Ag−1. The capacitance performance of c-PPy/G hybrid electrodes was larger than that of c-PPy electrode, while that of c-PPy/GO and c-PPy/CNH hybrid electrodes was smaller. And the specific capacitance of c-PPy/SWCNTs hybrid electrodes was slightly decreased at high current densities and scan rates. The capacitance retention of c-PPy/MWCNTs and c-PPy/SWCMTs hybrid electrodes was approximately 80% and 75% (after 6000cycles). It was assumed that the crosslink of CNTs was overlapped with c-PPy in c-PPy/CNTs hybrid electrodes to construct a three dimension (3D) porous conductive network to provide ion diffusion channels, electron transport pathways, high specific surface area and active sites. The cowered G played a slightly positive influence on the construction of continuous conductive c-PPy network, while the relative flat GO had a very negative impact. The particle-like CNH was not tightly adhered to the fiber-like c-PPy, which made the fluffy hybrid nanostructure. Therefore, the c-PPy/SWCNTs can be used as the active electrode of high-capacity energy storage devices.

Effects of Additives on Properties of Polypyrrole Solid-Chip Aluminum Electrolytic Capacitors

Electrical Performance Enhancement of 400 V Level Aluminum Solid Electrolytic Capacitors with Interface Modulation Through Intervention of PVA

Influence of Impregnation Technology on the Property of Winding-Solid Polypyrrole Aluminum Electrolytic Capacitor

The Enhanced Capacitance Performance of the Modified Polypyrrole with the Mixture of Carbon Nanomaterials

Enhanced electrochemical charge storage performance by doping of copper phthalocyanine-3,4′,4″,4‴-tetrasulfonic acid tetrasodium salt into polypyrrole/multi-walled carbon nanotubes 3D-nanostructured electrodes

Effect of Doping Ions on Electrochemical Capacitance Properties of Polypyrrole Films

Performance of Flexible Capacitors Based on Polypyrrole/Carbon Fiber Electrochemically Prepared from Various Phosphate Electrolytes

Influence of Electropolymerization Conditions on the Capacitance and Dissipation Factor of Polypyrrole Tantalum Electrolytic Capacitors

Effect of Doping Ions on Capacitance Properties of Polypyrrole/Functional Carbon Nanotube Composites

Preparation of the Flexible Polypyrrole/Polypropylene Composite Fibrous Film for Electrochemical Capacitor

Effects of Components in Solvent-Enhanced PVDF-HFP-Based Polymer Electrolyte on Its Electrochemical Performance

Effect of Additives on the Morphology and Performance of Symmetric Network PVDF Membranes

Preparation and Capacitive Property of Polypyrrole Deposited on the Flexible Polypropylene Fibrous Films

Flexible Electrochemical Capacitors Based on Polypyrrole/carbon Fibers Via Chemical Polymerization of Pyrrole Vapor

Toward a high specific power and high stability polypyrrole supercapacitors

Polypyrrole film based flexible supercapacitor: mechanistic insight into influence of acid dopants on electrochemical performance

A comprehensive study on structural, optical, electrical, and dielectric properties of PVA-PVP/Ag-TiO 2 nanocomposites for dielectric capacitor applications

Capacitive Characteristics of Nanocomposites of Conducting Polypyrrole and Functionalized Carbon Nanotubes: Effects of in Situ Dopant and Film Thickness

Additives to propylene carbonate-based electrolytes for lithium-ion capacitors

Effects of Sodium Alginate on the Composition, Morphology, and Electrochemical Properties of Electrospun Carbon Nanofibers As Electrodes for Supercapacitors

Engineering the Volumetric Effect of Polypyrrole for Auto-Deformable Supercapacitor