Abstract:TiC ceramics have become one of the most potential ultra-high temperature structural materials, because of its high melting point, low density, and low price. However, the poor mechanical properties seriously limit its development and application. In this work, this review follows PRISMA standards, the mechanism of the second phase (particles, whiskers, and carbon nanotubes) reinforced TiC ceramics was reviewed. In addition, the effects of the second phase on the microstructure, phase composition and mechanical properties of TiC ceramics were systematically studied. The addition of carbon black effectively eliminates the residual TiO2 in the matrix, and the bending strength of the matrix is effectively improved by the strengthening bond formed between TiC; SiC particles effectively inhibit the grain growth through pinning, the obvious crack deflection phenomenon is found in the micrograph; The smaller grain size of WC plays a dispersion strengthening role in the matrix and makes the matrix uniformly refined, and the addition of WC forms (Ti, W) C solid solution, WC has a solid solution strengthening effect on the matrix; SiC whiskers effectively improve the fracture toughness of the matrix through bridging and pulling out, the microscopic diagram and mechanism diagram of SiC whisker action process are shown in this paper. The effect of new material carbon nanotubes on the matrix is also discussed; the bridging effect of CNTs can effectively improve the strength of the matrix, during sintering, some CNTs were partially expanded into GNR, in the process of crack bridging and propagation, more fracture energy is consumed by flake GNR. Finally, the existing problems of TiC-based composites are pointed out, and the future development direction is prospected.

Microstructural Characterization and Micromechanical Properties of Dual-Phase Carbide in Arc-Melted Titanium Aluminide Base Alloy with Carbon Addition

Role of Graphite on Microstructural Evolution and Mechanical Properties of Ternary TiAl Alloy Prepared by Arc Melting Method

Microstructure and Mechanical Properties of Dual Scaled NbC/Ti2AlC Reinforced Titanium–Aluminum Composite

Understanding the Role of Carbon Atoms on Microstructure and Phase Transformation of High Nb Containing Tial Alloys

Microstructures and Mechanical Properties of Directionally Solidified C-containing Γ-Tial Alloys Via Electromagnetic Cold Crucible

Fabrication, microstructure and mechanical properties of TiAl matrix composite reinforced by submicro/nano-Ti 2 AlC

The Preparation Process, Microstructure and Properties of Cellular TiC-High Mn Steel-Bonded Carbide

Microstructures and Mechanical Properties of As-Cast Tial Alloys with Higher C Additions

Microstructural Characterization of V-doped Single-Phase Titanium Aluminide

Effect of TiB and TiC on Microstructure and Tensile Property of TiAl Based Intermetallic Compound

Microstructure Evolution of As-Cast Nb-Ti-C Alloys

Microstructure and compression behavior of in-situ synthesized Ti2AlC reinforced Ti-48Al-2Cr alloy with carbon nanotubes addition

Microstructure and Properties Evaluation of WTi(C,N)-06 Cemented Carbide with TaC and NbC

The Effects of the Formation of a Multi-Scale Reinforcing Phase on the Microstructure Evolution and Mechanical Properties of a Ti2AlC/TiAl Alloy

Integrating Experimental and Computational Analyses for Mechanical Characterization of Titanium Carbide/Aluminum Metal Matrix Composites

Microstructure Evolution of Near-Α Titanium Alloys During Thermomechanical Processing

Variations of Microstructure and Tensile Property of Γ-Tial Alloys with 0–0.5 At% C Additives

Microstructure evolution and tensile property of TiAl alloy using continuous direct energy deposition technique

Microstructure and Mechanical Properties of Carbide Reinforced TiC-Based Ultra-High Temperature Ceramics: A Review

Effect of carbon alloying on microstructure and mechanical behaviors of Fe35Ni35Cr20Mn10 multi-component alloy

A Preliminary Research on the Mechanical Properties of TiAl+Ti5Si3 Dual Phase Alloys