Abstract:Despite successful demonstrations of the aforementioned nanostructured SnO 2 electrodes, it is still challenge to produce them in practical quantities. Recently, electrospinning has become one of the most appealing approaches to fabricating fi brous carbon-based composites for Li-ion batteries because of its excellent designability and practical mass production. [ 39–44 ] In this regard, multifarious SnO 2 /C nanocomposites, in which SnO 2 nanoparticles are embedded in porous carbon nanofi bers, have been fabricated by pyrolysis of polymers (polyvinylpyrrolidone or polyacrylonitrile) using an electrospinning technique. [ 43–47 ] However, these polymer nanofi ber fi lms may shrink and pulverize during the carbonization process, making them unable to provide self-supported electrodes. Hence, most of SnO 2 /C nanocomposites produced by electrospinning must use slurry-casting for electrode fabrication, where SnO 2 /C nanocomposites, acetylene black, and a binding agent are mixed and laminated onto a metallic Cu foil current collector. Furthermore, the Cu current collector is heavy and inactive, making the resulting LIBs heavy, rigid, and bulky, with poor fl exibility. Moreover, the capacity of SnO 2 anodes, calculated on the basis of the overall mass of the entire electrode (including the weight of the Cu current collectors, acetylene black and binder), is lower than 100 mAh g −1 . [ 48 ] Therefore, the fabrication of a freestanding uniform SnO 2 /C nanofi ber fl im with high specifi c capacity and excellent mechanical properties would be helpful in addressing this problem. In this study, we report a new electrospinning strategy to encapsulate SnO 2 nanoparticles in a fl exible nitrogen-doped carbon nanofi ber fi lm (denoted as SnO 2 @N-CNF) by using polyamic acid (PAA) as a polymer precursor. After imidation, the PAA nanofi bers became polyimide nanofi bers with high thermal stability and carbon residue (Figure S1, Supporting Information). [ 49 ] A freestanding SnO 2 @N-CNF fi lm with excellent structural stability was successfully obtained by carbonization (as shown in Scheme 1 ). In the resulting SnO 2 @N-CNF fi lm, 5–10 nm SnO 2 particles were well dispersed and surrounded by intertwined nitrogen-doped carbon nanofi bers. This unique nanostructure can effectively accommodate the huge volume change of the SnO 2 particles during lithium ion insertion and extraction. New electrode DOI: 10.1002/smll.201503315 Li-Ion Batteries

Plum-branch-like carbon nanofibers decorated with SnO2 nanocrystals.

SnO_2-filled carbon nanotubes and their lithium ions storage properties

Preparation and Performance of SnO2 Nanoparticles Encapsulated in Carbon Nanofibers As Anodes for Lithium-Ion Battery

Enhanced performance of SnO 2 –C composite fibers containing NiO as lithium-ion battery anodes

Carbon Nanofibers: Synthesis, Characterization, and Electrochemical Properties

Synthesis of Uniform Polycrystalline Tin Dioxide Nanofibers and Electrochemical Application in Lithium-Ion Batteries

Carbon-coated SnO2 nanotubes: template-engaged synthesis and their application in lithium-ion batteries.

Alginate-Assisted Synthesis of Hollow Microfibers Assembled by Sno2 Nanoparticles

Preparation of Nanowire Arrays of Amorphous Carbon Nanotube-Coated Single Crystal SnO<sub>2</sub>

Encapsulating homogenous ultra-fine SnO2/TiO2 particles into carbon nanofibers through electrospinning as high-performance anodes for lithium-ion batteries

Growth of Ultrafine SnO 2 Nanoparticles Within Multiwall Carbon Nanotube Networks: Non-Solution Synthesis and Excellent Electrochemical Properties As Anodes for Lithium Ion Batteries

Synthesis and Ethanol Sensing Properties of SnO2 Nanoparticles in SnO2 Nanotubes Composite

A Novel Dried Plum-Like Yolk–shell Architecture of Tin Oxide Nanodots Embedded into a Carbon Matrix: Ultra-Fast Assembly and Superior Lithium Storage Properties

In Situ Growth of Tin Oxide Nanowires, Nanobelts, and Nanodendrites on the Surface of Iron-Doped Tin Oxide/Multiwalled Carbon Nanotube Nanocomposites

Tin-Antimony/Carbon Composite Porous Fibers: Electrospinning synthesis and Application in Sodium-Ion Batteries

SnO2-Based Hierarchical Nanomicrostructures: Facile Synthesis and Their Applications in Gas Sensors and Lithium-Ion Batteries

Synthesis of SnO2versus Sn Crystals Within N-doped Porous Carbon Nanofibers Via Electrospinning Towards High-Performance Lithium Ion Batteries

Carbon nanotube capsules encapsulating SnO2 nanoparticles as an anode material for lithium ion batteries

/N-Doped Carbon Nanofi ber Films as Integrated Electrodes for Lithium-Ion Batteries with Superior Rate Capacity and Long Cycle Life

Synthesis of MnO–Sn cubes embedding in nitrogen-doped carbon nanofibers with high lithium-ion storage performance

Room-temperature Synthesis of Colloidal SnO2 Quantum Dot Solution and Ex-Situ Deposition on Carbon Nanotubes As Anode Materials for Lithium Ion Batteries