Abstract:To improve the mechanical rigidity of the electrocatalyst and assure a higher number density of catalytic sites of the counter electrode in dye-sensitized solar cells (DSCs), we have extended widely applied titanium tetrachloride treatment to construct a rough scaffolding underlayer for the platinized counter electrode. Field-emission scanning electron microscopy and atomic force microscopy images clearly depicted the platinum nanoparticles with a diameter of ca. 10 nm homogeneously distributed on the scaffolding underlayer of the bilayer counter electrode and thus led to a characteristically high surface roughness. The electocatalytic activity of this novel bilayer counter electrode was measured and compared with the corresponding properties of conventional sputtered Pt electrode. Interestingly, electrochemical impedance spectroscopy and cyclic voltammetry measurements further demonstrated the notably larger electrochemical active surface area and thereby higher electrocatalytic activity of the bilayer counter electrode. Consequently, under standard 1 sun illumination (100 mW cm(-2), AM 1.5), device with this bilayer counter electrode achieved a considerably improved fill factor of 0.67 and overall energy conversion efficiency of 7.09%, which was apparently higher than that of 0.60 and 6.37% for sputterd Pt electrode. Therefore, this present method paves a facile and inexpensive way to prepare high-electrocatalytic bilayer counter electrode in DSCs.

A New Front Contact Counter Electrode with Multiwall Carbon Nanotube Array for Dye-Sensitized Solar Cells

Low-cost Counter Electrodes Based on Nitrogen-Doped Porous Carbon Nanorods for Dye-Sensitized Solar Cells

Fabrication and Characterization of a Multi-Walled Carbon Nanotube-Based Counter Electrode for Dye-Sensitized Solar Cells

Conducting polymer/carbon nanotube composite as counter electrode of dye-sensitized solar cells

Flexible counter electrodes with a composite carbon/metal nanowire/polymer structure for use in dye-sensitized solar cells

A novel counter electrode based on mesoporous carbon for dye-sensitized solar cell

Penetrated and aligned carbon nanotubes for counter electrodes of highly efficient dye-sensitized solar cells

A novel carbon nanotube/polymer composite film for counter electrodes of dye-sensitized solar cells

An Efficient Metal Conductor Paste/Nanoporous Carbon Composite Counter Electrode for Dye-Sensitized Solar Cells

Preparation and Properties of Carbon Counter Electrodes for Dye-sensitized Solar Cells

Graphitic Carbon Nitride/multiwalled Carbon Nanotubes Composite As Pt-free Counter Electrode for High-Efficiency Dye-Sensitized Solar Cells

Carbon Nanostructured Fibers As Counter Electrodes in Wire-Shaped Dye-Sensitized Solar Cells

Vertically aligned single-walled carbon nanotubes as low-cost and high electrocatalytic counter electrode for dye-sensitized solar cells.

Facile Construction Of High-Electrocatalytic Bilayer Counter Electrode For Efficient Dye-Sensitized Solar Cells

A Low Cost Mesoporous Carbon/sno2/tio2 Nanocomposite Counter Electrode for Dye-Sensitized Solar Cells

Functionalization of Aligned Carbon Nanotubes Used As Counter Electrode for Dye-Sensitized Solar Cells

Functionalized Reduced Graphene Oxide Loaded Aligned Carbon Nanotube Layer Used As Counter Electrode for Dye-Sensitized Solar Cells.

A Free Radical Assisted Strategy For Preparing Ultra-Small Pt Decorated Cnts As A Highly Efficient Counter Electrode For Dye-Sensitized Solar Cells

Anthocyanin-sensitized Solar Cells Using Carbon Nanotube Films As Counter Electrodes

Three-Dimensional Vertically Aligned Hybrid Nanoarchitecture of Two-Dimensional Molybdenum Disulfide Nanosheets Anchored on Directly Grown One-Dimensional Carbon Nanotubes for Use As A Counter Electrode in Dye-Sensitized Solar Cells

Electro-polymerization of Polypyrrole/multi-Wall Carbon Nanotube Counter Electrodes for Use in Platinum-Free Dye-Sensitized Solar Cells