Experimental Study on Temperature Evolution Law of Train Brake Disc
CHEN Youjie,FU Rong,YANG Junying,QI Wei,SU Linlin,GAO Fei
DOI: https://doi.org/10.3969/j.issn.1001-4632.2023.02.14
2023-01-01
Abstract:Taking vermicular graphite cast iron brake disc as the reference frame, the temperature evolution laws of aluminum-based brake disc was examined in an experimental study with infrared thermal camera under the braking pressure between 0. 35-0. 80 MPa at the initial braking speed between 60-160 km·h -1 based on the TM-I type scaling inertial braking dynamometer. The results show that when the initial braking speed increases from 100 km·h -1 to 160 km·h -1 under the braking pressure of 0. 80 MPa, the peak temperature field of the aluminum-based brake discs changes from a uniform distribution to a multi-strip zonal distribution, whereas a high-temperature band with the width of about 10 mm occurs on all the cast iron brake discs. The peak temperatures of the two brake discs both increase as the braking pressure and the initial braking speed increase.However, during the process of braking, the transient peak temperature of the aluminum-based brake disc presents a steady rise, and does not show an obvious decrease in the later stage of braking; while the transient peak temperature of the cast iron brake disc first rises rapidly, then climbs zigzag, and finally decreases. When the initial braking speed increases from 80 km·h -1 to 160 km·h -1 at the braking pressure of 0. 65 MPa, the maximum radial temperature difference of the aluminum-based brake disc increases from 31 ℃ to 56 ℃ and the maximum temperature gradient increases from 1-2 ℃·mm -1 to 3-4 ℃·mm -1 ; whereas those of the cast iron brake discs increase from 139 ℃ to 233 ℃ and from 7-8 ℃·mm -1 to 10-11 ℃ · mm -1 , respectively. This is due to low stiffness, good thermal conductivity and strong deformation compatibility of the aluminum-based brake disc, which is conducive to maximizing the contact area and promoting the uniform distribution of braking energy, thereby reducing the chance of forming local high-temperature zones and reducing temperature difference.