Abstract:Continuous linear commands are widely executed in computer numerical control (CNC) machining. The tangential discontinuity at the junction of consecutive segments restricts the machining efficiency and deteriorates the surface quality. Corners of linear segments have been successfully blended by inserting parametric splines. There still exists challenges when the common methods are employed in the line-segment commands due to part of the following restrictions: (1) the stringent computation for iteratively calculating the arc-length; (2) the unwanted feedrate fluctuation; (3) the oversize contour deviation for separately completing curve fitting and velocity planning. A novel smoothing method based on a clothoid pair to synchronously accomplish planning of geometry blending and speed scheduling is proposed, the spline parameter of which is arc-length-parameterized. The arc-length, curvature extreme, and geometric shape of the transition curve are analytically expressed by the transition length. On these bases, the transition curve and the velocity profile are concurrently constructed based on the predefined approximation error, the reachable velocity, and normal kinematic constraints in the look-ahead stage. Then, a real-time interpolation scheduling is developed to overcome the crossing difficulties between the linear and parametric segments. Compared with existing methods, the proposed method can analytically calculate the length of transition curves for the arc-length-parameterized expression form. Furthermore, the feedrate fluctuation is eliminated in the fine interpolation. Moreover, the overlarge contour derivation produced by corner smoothing is significantly avoided. It is friendlier to the CNC system for the on-line executing smooth motion since more computing resources can be released to handle other tasks, smoother motion can be achieved and higher contour accuracy can be obtained. The experimental results also demonstrate its practicability and reliability.

A kind of spatial straight line interpolation method based on the hybrid realization of time division method and digital integration method

A smoothing method of continuous line-segment path in CNC machining based on real-time transformation of interpolation points

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

Adaptive Prospective Interpolation Method for High Speed Machining of Micro Line Blocks Based on the Cubic Polynomial Model

Application of an Optimized Sampled-data Interpolation Algorithm in Open-loop CNC

A Fine-Interpolation-based Parametric Interpolation Method with a Novel Real-Time Look-Ahead Algorithm

A Real-Time Look-Ahead Interpolation Methodology with Curvature-Continuous B-Spline Transition Scheme for Cnc Machining of Short Line Segments

A new toolpath generation method with feed sensitive zones inspection based on inverse evaluation mechanism.

A Look-Ahead and Adaptive Speed Control Algorithm for Parametric Interpolation

Research on Inverse Evaluation Mechanism in Toolpath Generation Based on Global Interpolation Simulation

Research on Consecutive Micro-Line Interpolation Algorithm with Local Cubic B-spline Fitting for High Speed Machining

A New Linear Interpolation Method with Lookahead for High Speed Machining

A Newly Developed Corner Smoothing Methodology Based on Clothoid Splines for High Speed Machine Tools

An Optimal Feed Interpolator Based on G~2 Continuous Bézier Curves for High-Speed Machining of Linear Tool Path

Adjustment of Feedrate Planning Basing on Discrete Interpolation Interval in Interpolation Process.

Smoothing interpolation of five-axis tool path with less feedrate fluctuation and higher computation efficiency

A Real-Time Interpolation Strategy for Transition Tool Path with C 2 and G 2 Continuity

An integrated trajectory smoothing method for lines and arcs mixed toolpath based on motion overlapping strategy

A Novel Local Smoothing Method for Five-Axis Machining With Time-Synchronization Feedrate Scheduling

A novel time-optimal linear toolpath smoothing method based on airthoid and circular splines for CNC machining

A real-time interpolation strategy for transition tool path with C2 and G2 continuity