Abstract:In the field of computerized numerical control (CNC) machining, high-speed and high-precision machining has been regarded as the key research by many scholars. In conventional methods, high-speed machining and high-precision machining are contradictory. It is inevitable to reduce the feedrate to improve the processing accuracy. In the paper, a pre-compensation based on discrete inverse transfer function (PDIT) theory is proposed. PDIT is able to improve machining contour accuracy without decreasing feedrate. The proposed PDIT theory is divided into three parts: NURBS interpolator, feedrate scheduling, and interpolator with pre-compensation. The NURBS interpolator has great advantage of directly interpolating the parametric curve. Therefore, the paper adopts the NURBS interpolator to accomplish interpolation. In the feedrate scheduling, S-type flexible acceleration and deceleration are used for path planning, and the maximum starting feedrate is obtained under the feedrate constraint. In the interpolator with pre-compensation, the NURBS interpolator is pre-compensated by PDIT. For the input, the response of the transfer function reaches a steady-state response within periods of time. Before steady-state response, the unsteady-state response exists in the transfer function. The unsteady-state response usually sustains dozens of interpolation periods, which inevitably lead to contour error in machining. Hence, the PDIT theory is employed to compensate the contour error caused by the unsteady-state response of transfer function to NURBS interpolator. The drive system is a transfer function, so the unsteady-state response of drive system can also cause machining errors before the steady-state response. In the paper, the NURBS interpolator is pre-compensated by PDIT theory before drive system to reduce contour errors and improve machining accuracy. Finally, the performance of the proposed PDIT is evaluated by simulations and experiments. The experimental results illustrate that PDIT theory obviously improve the machining accuracy.

Application of an Optimized Sampled-data Interpolation Algorithm in Open-loop CNC

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

An Interpolation Method for the Open CNC System Based on EPM

A smoothing method of continuous line-segment path in CNC machining based on real-time transformation of interpolation points

A New Linear Interpolation Method with Lookahead for High Speed Machining

A Fine-Interpolation-based Parametric Interpolation Method with a Novel Real-Time Look-Ahead Algorithm

Study on Control Algorithm for Micro-line Interpolation End-point

Research of High Performance Self-adaptive Interpolation Based on Open Architecture CNC

Research on high performance fine interpolation of CNC basedon high-speed uniform pulse distribution algorithm

Research and Development of Sampled-data Interpolation Algorithm Software in CNC System Based on the Visual C++

Research on Inverse Evaluation Mechanism in Toolpath Generation Based on Global Interpolation Simulation

A Look-Ahead and Adaptive Speed Control Algorithm for Parametric Interpolation

5-Axis Polynomial Spline Interpolation In An Open Cnc System

A survey of path planning and feedrate interpolation in computer numerical control

Smoothing interpolation of five-axis tool path with less feedrate fluctuation and higher computation efficiency

NURBS interpolator with pre-compensation based on discrete inverse transfer function for CNC high-precision machining

A fully real-time spline interpolation algorithm with axial jerk constraint based on FIR filtering

A novel feedrate scheduling method using modifying S-shaped feedrate profile with a round-off error elimination approach for CNC machining

Optimization of Computer Numerical Control Interpolation Parameters Using a Backpropagation Neural Network and Genetic Algorithm with Consideration of Corner Vibrations

A novel S-shape based NURBS interpolation with acc-jerk- Continuity and round-off error elimination

Integration of a 5-Axis Spline Interpolation Controller in an Open CNC System