Abstract:The random surface roughness effects on the performances of gas-lubricated slider microbearings are investigated using finite volume analysis. The rough surface morphologies with the atomic force microscope (AFM) data and the numerical procedures used to generate self-affine surfaces by the midpoint displacement method are proposed and compared. Three-dimensional finite volume modeling of the gas microbearing and its flow field mesh are described considering the velocity-slip boundary condition. The results indicate that surface roughness causes a deviation in the pressure distribution, load-carrying capacity, velocity profile, and local Reynolds number from conventional theory with various values depending on the degree of surface roughness used. The pressure decreases irregularly due to the fractal surface and produces a larger change. The larger the roughness exponent is, the larger the gas slip velocity at the bottom of the wall. In addition, the velocity-slip boundary condition can cause a decrease in the gas flow velocity. The surface roughness effect also leads to random variations in the local Reynolds number. This demonstrates that the random surface roughness potentially causes very complicated flow behavior in the ultra-thin-film bearing lubrication in microelectromechanical systems (MEMS) and should be adequately characterized in terms of the fractal nature of the bearing surfaces.

Some Aspects of Determining the Flow Factors

The Effect of Slip Distribution on Flow Past a Circular Cylinder

Finite-Element Analysis of Aerostatic Lubrication with Porous Restrictors Based on Hypermesh

Numerical simulation of flow and heat transfer in journal bearing lubrication

Study on Lubricant Thermal Influence on Flow Factors

On Elastic Deformation, Inter-Asperity Cavitation and Lubricant Thermal Effects on Flow Factors

Study on Combined Influence of Inter-Asperity Cavitation and Elastic Deformation of Non-Gaussian Surfaces on Flow Factors

Finite Volume Modeling of Gas Flow in Microbearings with Rough Surface Topography

Influence of Inter-asperity Cavitation of Rough Surfaces on Flow Factors

Flow Field Characteristics of Micro-Scale Textured Surfaces of Water-Lubricated Bearings Using Lattice Boltzmann Method

Analysis of the Effect of Surface Topography on Lubrication Using Heterogeneous Multiscale Method

Slip Flow and Heat Transfer in Microbearings with Fractal Surface Topographies

Numerical Prediction of Surface Roughness Effect on Slip Flow in Gas-Lubricated Journal Microbearings

Influence of local turbulent flow on the performance of a mixed-lubrication bearing

Random surface roughness effect on slider microbearing lubrication

Investigation on Characteristics of Flow in Microchannels with Random Surface Roughness

Effect of Non-Equilibrium Flow on Micro Scale Gas Lubrication:A Simulation and Analytical Study

Effects of Random Surface Roughness on Micro Gas Bearing

Analysis of the Rolling Interface Contact Characteristics in Mixed Lubrication Based on Gaussian Distribution Theory

Interactive Effects Of Rarefaction And Surface Roughness On Aerodynamic Lubrication Of Microbearings

Coupled nonlinear effects of random surface roughness and rarefaction on slip flow in ultra-thin film gas bearing lubrication