Abstract:The non-liquid-phase coordination crosslinking reaction of acrylonitrile-butadiene rubber/copper sulfate (NBR/CuSO4) mixture was investigated by differential scanning calorimetry (DSC), Fourier transform infrared (FT-IR) spectrometry and X-ray photoelectron spectroscopy (XPS) The NBR/CuSO4 mixture specimens for DSC and FT-IR were prepared in an open two-roll mill at room temperature by blending NBR ( 100 phr) and CuSO4 powders ( 10,20 and 30 phr, respectively) Specimens for XPS test were prepared by molding NBR/CuSO4 mixtures at 120, 170, 190 and 200 degrees C for 20 min. DSC results showed that pure NBR was thermostable and inert between 150 degrees C and 270 degrees C, while the curves of NBR/CuSO4 mixtures presented three thermopositive peaks in the temperature range from 150 degrees C to 330 degrees C. FT-IR spectrometry indicated that the polymer structure of the specimens maintained without noticeable alteration at temperatures below 200 degrees C. It means there were no oxidations or other exothermal reactions except for the probable coordination reaction between -CN and Cu2+. N1s XPS spectrum of NBR/CuSO4 mixtures Only displayed a single peak with a binding energy of 399.1 eV belonging to free -CN at lower temperature (120 degrees C), while fitting N1s spectrum gave two secondary peaks tit 399.2 eV and 401. 3 eV at the test temperature of 170 degrees C 190 degrees C and 200 degrees C, and the latter was attributed to coordinated -CN. It bore Out that the coordination reaction of -CN and Cu2+ carried out well and truly. Moreover, it was confirmed that the first thermopositive peak of DSC was attributed to the coordination crosslinking reaction of -CN and Cu2+ in the non-liquid-phase mixture. The apparent activation energy and reaction order of the non-liquid-phase coordination crosslinking reaction were evaluated by Kissinger method and Crane equation. With CuSO4 content of 10, 20 and 30 phr the results of apparent activation energy were 86.22, 85.89 and 83.98 W/mol, and the reaction orders were around 0.9.

Interfacial Coordination Reaction in Copper Sulfate Particles Filled Styrene-Acrylonitrile Copolymer Composites

Effect of Thermal Annealing on the Electrical Conductivity of Copper-Tin Polymer Composites.

Electrical, Morphological and Rheological Study of Melt-Mixed Polystyrene/Copper Nanowire Nanocomposites

Enhancing dispersion of copper nanowires in melt-mixed polystyrene composites

Research of Styrene/Aerylonitrille/N-Phenlymaleimide Emalsion Copolymerization

Preparation and Characterization of Acrylic Rubber/Copper Sulfate Coordination Crosslinked Composites

Preparation and characterization of ABS and copper (II) sulfate coordination composites by planetary ball mill

EFFECT OF COPPER SULFATE CONTENT ON COORDINATION CROSSLINKING REACTION BETWEEN COPPER SULFATE AND ACRYLONITRILE-BUTADIENE RUBBER

STUDY ON THE NON-LIQUID-PHASE COORDINATION CROSSLINKING REACTION OF ACRYLONITRILE-BUTADIENE RUBBER/COPPER SULFATE COMPOSITES

Investigation on the Coordination Interfacial Reaction by Dynamical Mechanical Analysis

Novel in Situ Coordination Copper Sulfate/ Acrylonitrile–butadiene Rubber Composite

Influence of Interfacial Adhesion on Stress-Strain Properties of Highly Filled Polyethylene

Preparation of Polystyrene/Sio2 Composite Nanoparticles Bearing Sulfonic Groups on the Surface Via Emulsion Copolymerization Using A Polymerizable Emulsifier

Improved tensile strength of acrylonitrile–butadiene rubber/anhydrous copper sulfate composites prepared by coordination cross-linking

Investigation on Crosslinking Behaviors of NBR/PVC Filled with Anhydrous Copper Sulfate Particles by Dynamic Mechanical Analysis

Studies on Coordination Crosslinking Of(Nbr/Pvc)/Cuso4 Composites by Differential Scanning Calorimetry and Infrared Spectrometry

Effects of Sc-Co2 Treatment on the Properties of Nbr/Cuso4 Composites

Effects of Small Molecule Plasticizer on the Coordination Crosslinking Reaction Between Acrylonitrile‐butadiene Rubber and Copper Sulfate

Crosslinking Induced by In‐situ Coordination in Acrylonitrile Butadiene Rubber/poly(vinyl Chloride) Alloy, Filled with Anhydrous Copper Sulfate Particles

Melt flow characterization of highly loaded cooper filled poly(acrylonitrile-co-butadiene-co-styrene)

A Composite of Epoxy Resin/copper(ii) Acetylacetonae As Catalyst of Copper Addition on Insulated Substrate