Abstract:An amorphous MnO(2)·nH(2)O/microporous carbon spheres (α-MnO(2)·nH(2)O/MCS) composite electrode material is prepared by a chemical co-precipitation method. It is observed that the amorphous MnO(2) particles are deposited on the surface of the MCS, which form a network with a uniquely developed three-dimensional open porous system containing macropores, mesopores and micropores. The electrochemical measurements reveal that the composite electrode material presents a much more stable and reversible capacitance behavior compared to the pure α-MnO(2)·nH(2)O in 1 M of Na(2)SO(4) electrolyte. The composite containing 25 wt% MCS exhibits optimal specific capacitance of 218.2 F g(-1) at 2 mV s(-1), and is still as high as 112.4 F g(-1) at 100 mV s(-1), while a drastic reduction from 197.0 F g(-1) at 2 mV s(-1) to only 40.7 F g(-1) at 100 mV s(-1) occurs for the pure α-MnO(2)·nH(2)O. The composite also shows a rather high electrode-specific capacitance of 3.13 F cm(-2) and a long cycle life. The remarkable enhancement in the electrochemical performance is mainly attributed to the microporous structure of the MCS contributing to the deposition of MnO(2) particles on the surface of the MCS, and the uniquely developed porous network of the composite facilitating the rapid transport of the electrolyte. These factors result in the high electrochemical utilization of MnO(2), a great reduction of the equivalent series resistance, and hence the relatively high and stable electrochemical behavior.

Effect of Iron Addition on Electrochemical Behavior of Manganese Dioxide

Effect of Fe 3+ on the synthesis and electrochemical performance of nanostructured MnO 2

Manganese Oxide-Based Electrode Behavior As Materials for Electrochemical Supercapacitors

Enhancement of Electrochemical Capacitive Properties Based on Complementation of Morphologies

Influence of Iron Concentration and Post-Annealing Temperature on Structure and Pseudocapacitive Characteristics of a MnO 2 –fe 2 O 3 Nanocomposite

The Preparation of Nanostructure MnO_2 for Supercapacitor Electrode Material by Electrodeposition

Electrochemical Properties of Nanosized Hydrous Manganese Dioxide Synthesized by A Self-Reacting Microemulsion Method

Nanostructured MnO2: Hydrothermal Synthesis and Electrochemical Properties As a Supercapacitor Electrode Material

Influence of iron concentration and post-annealing temperature on structure and pseudocapacitive characteristics of a MnO2–Fe2O3 nanocomposite

Potassium Manganese Oxides:Electrochemically Controlled Synthesis and Capacitor Properties

Electrodeposition of Manganese Dioxide under Different Conditions: Application of MnO2/Carbon Fibers in the Electrosorption Process

The effects of calcination on the electrochemical properties of manganese oxides

Preparation and Electrochemical Performance of Nanostructured MnO2 Materials

A joint experimental and theoretical study on the effect of manganese doping on the structural, electrochemical and physical properties of lithium iron phosphate

Effect of Mn substitution on the microstructure of (MgCoNiZnCu)O powder and its electrochemical performance as an anode material

Supercapacitive Studies on Amorphous MnO2 in Mild Solutions

Preparation of Manganese Dioxide for Electrodes of Supercapacitors Based on Duplex Stainless Steel

Effect of Mn Doping on the Structure and Electrochemical Performance of LiNi0.7Co0.3O2

Enhancement of the electrocapacitive performance of manganese dioxide by introducing a microporous carbon spheres network

Anomalous Effect of K Ion on Crystallinity and Capacitance of the Manganese Dioxide

Effect of the KMnO4 concentration on the structure and electrochemical behavior of MnO2