Abstract:During the laser melting deposition (LMD) additive manufacturing process, titanium alloys undergo rapid solidification, which induce grain growth into coarse columnar grains, resulting in lower mechanical properties of the material than conventional forgings. This study proposes the incorporation of hydrogen into titanium alloys to refine columnar grains, reduce deformation resistance, and improve machinability. In this work, the hot deformation behavior of hydrogenated Ti6Al4V alloy was analyzed via high-temperature compression experiment. The experimental results revealed the nucleated grains generated by the intense deformation and the twins brought by the hydrogen element led to massive dynamic recrystallizations, which effectively improved the hot workability. When the alloys are deformed above phase transition temperature, the flow stress is positive related with H content. Meanwhile, when the alloys are deformed below the phase transition temperature, the flow stress initially experiences a decrease with an increase in hydrogen content. Adding only 0.27 wt% H can reduce the flow stress by 34.4%–54%, but when the H content continues to increase, the flow stress still increases subsequently. Moreover, when the strain rate is constant, the flow stress of Ti6Al4V alloy can decrease by about 80% with an increase in deformation temperature from 820 °C to 940 °C. When the deformation temperature is constant, the flow stress of Ti6Al4V alloy with different hydrogen contents can decrease by around 65% as the strain rate reduces from 10s−1 to 0.01 s−1.

Hot deformation behavior and microstructure evaluation of hydrogenated Ti-6Al-4V matrix composite

High Temperature Deformation Behavior of Melt Hydrogenated (tib + Tic)/Ti-6al-4v Composites

Effect of Hydrogen on Microstructure and High Temperature Deformation of (tib + TiC)/Ti–6Al–4V Composite

Improvement In Hot Workability Of Titanium Matrix Composite By Thermohydrogen Treatment

Effect of hydrogen on superplastic deformation of (TiB + TiC)/Ti-6Al-4V composite

Hot-deformation Behaviour and Hot-Processing Map of Melt-Hydrogenated Ti6Al4V/(TiB+TiC)

Hot Deformation Behavior and Dynamic Recrystallization of Melt Hydrogenated Ti-6Al-4V Alloy

The hot deformation behavior and dynamic microstructure evolution of additive manufactured Ti6Al4V with different hydrogen addition

Hydrogen Induced Softening and Hardening for Hot Workability of (tib + TiC)/Ti-6Al-4V Composites

Hydrogen Induced Microstructure Evolution of Titanium Matrix Composites

Effects of Melt Hydrogenation on the Microstructure Evolution and Hot Deformation Behavior of TiBw/Ti-6Al-4V Composites

Hot Deformation Behavior of a Near Alpha Titanium Alloy With/without Thermal Hydrogen Processing

Deformation Behavior and Microstructural Evolution of Hydrogenated Ti44Al6Nb Alloy During Thermo-Compression at 1373–1523 K

Hydrogen-induced hot workability in Ti-6A1-4V alloy

Microstructure Evolution and Enhanced Hot Workability of TiC/Ti-6Al-4V Composites Fabricated by Melt Hydrogenation

Effect of Hydrogen on Hot Deformation Behaviors of Tial Alloys

Effect of hydrogen on hot deformation behavior and microstructure evolution of Ti65 alloy

Effect of hydrogen on deformation induced phase transformation and hot workability of Ti2AlN/Ti46Al4Nb1Mo composites

Effect of Thermo Hydrogen Treatment on Microstructure and Mechanical Properties Of(tib,tic)/ti-6Al-4v Composite

Towards Enhancing the Hot Deformability of Ti2AlN/Ti46Al4Nb1Mo Composites Via Melt Hydrogenation

Characteristic of Deformation of Ti-6Al-4V Alloy with Hydrogen at High Temperature