Abstract:A scratch-resistant improvement of sol-gel derived nano-porous silica films by a base/acid two-step catalysis is reported. The silica films were prepared with the two-step catalytic sol-gel process and a dip-coating method, and then post annealed in air and a mixed gas atmosphere. The films were characterized with FE-SEM, AFM, TEM, XPS, FTIR, an ellipsometer, and an abrasion test. With the post annealing, the frequency shift of the FTIR absorption omega (4)(TO3) peak of the films to a lower wavenumber results from a decrease in the average Si-O-Si bridging angle. An increase in the full-width at half-maximum of the omega (4) peak is ascribed to a wide distribution of the bridging angle because of formation of strained Si-O-Si bonds caused by the post annealing. XPS analysis shows that the effect of the mixed gas annealing on the binding energy and full-width at half-maximum (FWHM) for Si (2p) and O (Is) peaks is attributed to the further condensation reaction of the films resulting from the disappearance of the OH groups. The abrasion and adhesion tests indicate that the two-step catalysis obviously improves the scratch resistance and adhesion of the films, and that the mixed gas treatment further strengthens the silica network. The increase in strength is attributed to more Si-O-Si bond cross-linkages between silica particles formed by the two-step catalysis and the mixed gas treatment.

Scratch-Resistant Improvement of Sol-Gel Derived Nano-Porous Silica Films

Properties of sol–gel derived scratch-resistant nano-porous silica films by a mixed atmosphere treatment

Preparation and Properties of Scratch-Resistant Nano Porous Broadband Ar Silica Films Derived by A Two-Step Catalytic Sol-Gel Process

Strengthening Mechanism of Porous Silica Films Derived by Two-Step Catalysis

Ambient pressure preparation and strengthening of silica aerogel films

A new method to control nano-porous structure of sol-gel-derived silica films and their properties

Structural control and strengthening of nano porous silica films

Sol-gel Preparation of a Silica Antireflective Coating with Enhanced Hydrophobicity and Optical Stability in Vacuum

Sol–gel Synthesis and Characterization of Silica Film with Two Opposite Structures: Nano-porous and Protuberant

Novel Pathways for the Preparation of Silica Antireflective Films: Improvement in Mechanical Property

Microstructure Control of Nanoporous Silica Thin Film Prepared by Sol-Gel Process

A Technical to Increase Thickness of Resin Film Avoiding Cracking

Nanocomposite Hardness Films Prepared by Sol-Gel Method

Structural Control of Porous Silica Thin Films under Alkaline Condition

Fabrication of a Scratch & Heat Resistant Superhydrophobic SiO2 Surface with Self-Cleaning and Semi-Transparent Performance

EFFECT OF EXPERIMENTAL CONDITIONS ON THE STRUCTURE AND PROPERTIES OF NANO-POROUS SILICA FILMS

Structure Control and Stability in Preparation of Silica Film Via Sol-Gel Process

Preparation and Characterization of Scratch and Mar Resistant Waterborne Epoxy/Silica Nanocomposite Clearcoat

Study on the Relationship between Structure and Scratch Resistance of Acrylic Based Polyurethane/Silica Nanocomposite Coatings

Improvement in Mechanical Property of Sio2 Films Prepared by Sol-Gel