Abstract:Phosphogypsum is an industrial waste generated in the production of fertilizers causing environmental problems. Calcined phosphogypsum (CPG) is obtained by low-temperature calcination and dehydration of phosphogypsum. CPG is mainly used to produce building materials. However, mechanical strength properties and water resistance of CPG materials is extremely poor, which leads to its relatively low utilization rate in construction industry. To address this issue, various amount of Ordinary Portland cement (OPC), fly ash (FA), rice husk (RH) and modified admixtures (AD) were mixed with the CPG to obtain CPG-based composite cementitious materials, which enhanced the water resistance and mechanical strength of the corresponding hardened materials. The influence of different contents of cement on the setting time, hydration heat, hydration products, mechanical properties, water absorption, heavy metal leaching and deterioration coefficient of the composite cementitious material is investigated. The results showed that the optimal mixing ratio of CPG: OPC: FA: RH was 57: 20: 10: 13 considering the water resistance and mechanical strength properties of CPG-based composite cementitious materials. On these conditions, the compressive strength, the flexural strength, water absorption and deterioration coefficient of the specimens at 28 days are 6.1 MPa, 4.6 MPa, 29.4% and 0.66 respectively, which were in line with the national standard of phosphorus building gypsum wallboard. It was demonstrated that two skeleton types are present in the samples prepared using CPG-based composite cementitious materials, which had a synergistic support effect on the structure. The first skeleton was formed by gypsum dihydrate crystals (CaSO 4 ·2H 2 O) and provided strength to the specimens at an early stage, while the second skeleton was formed by ettringite (AFt) and C–S–H gels, which provided strength at a later stage. The skeletons make the hardened materials denser and more waterproof. Moreover, the composite materials exhibited a positive solidification effect on heavy metals present in CPG.

Adaptability Analysis on Phosphogypsum As Cement Retarder

Study on Phosphogypsum As a Cement Retarder

Utilization of solidified phosphogypsum as Portland cement retarder

Study on using phosphor-gypsum property-modified by lime and flyash as cement retarding agent

Modification of phosphogypsum using circulating fluidized bed fly ash and carbide slag for use as cement retarder

The effects of admixtures on the durability properties of phosphogypsum-based cementitious materials

Study on the Properties of By-product Gypsum As Cement Retarder from the Treatment Processing of Sulfur Chemicals Wastewater by Marble Polishing Powder

Influence of cement on properties of calcined phosphogypsum based composite cementitious materials

Experimental Study on the Material Characteristics of Slag Cement with Various Phosphogypsum Materials

Resource utilization and development of phosphogypsum-based materials in civil engineering

Retardation mechanism of phosphogypsum in phosphogypsum-based excess-sulfate cement

An investigation into the effect of various chemical and physical treatments of a South African phosphogypsum to render it suitable as a set retarder for cement

The Influences of Soluble Phosphorus on Hydration Process and Mechanical Properties of Hemihydrate Gypsum under Deep Retarding Condition

Influences of pretreatment methods on the mechanical and environmental behaviors of PG-GGBS-LM ternary stabilizer

Effect of Phosphogypsum on the Properties of Portland Cement

Influence mechanism of retarders on the hydration of modified phosphoaluminate cement

Effect of soluble phosphate, fluoride, and pH in Brazilian phosphogypsum used as setting retarder on Portland cement hydration

A Sustainable Composite Cementitious Material Manufactured by Phosphogypsum Waste

PURIFICATION OF PHOSPHOGYPSUM FOR USE AS CEMENT RETARDER BY SULPHURIC ACID TREATMENT