Abstract:Purpose Examination of steel moment resisting frames after the 1994 Northridge earthquake showed fatigue cracks presented in the beam–column connections of the frames. These observations indicate that fatigue failure may occur in the steel components of building structures in an earthquake event. To apply the fatigue design approach using the Palmgren–Miner’s rule for steel components of the moment resisting frames requires the knowledge regarding the damage index value at fatigue failure. The purpose of this paper is to perform fatigue tests to give the first damage values of steel components subjected to real earthquake-induced loadings. Design/methodology/approach The added-damping-and-stiffness steel plates which are used in building structures for earthquake mitigation were fabricated and tested by constant amplitude, SAC block and earthquake-induced loadings to failure. The earthquake loadings were obtained from the dynamic analysis of a steel frame with the mentioned plates. The load cycles of the SAC block and the calculated earthquake loadings were counted using the rainflow-counting method, and the damage index value of each specimen were calculated using the Palmgren–Miner’s rule. Findings Reverse stiffness obtained from cyclic load-displacement loops is a robust and consistent parameter that can be used for determining fatigue failure of tested components. The Palmgren–Miner’s damage values at failure, caused by earthquake loadings, are smaller than 1, and in addition, are also smaller than those obtained from the tests of the SAC block loading. The large-amplitude cycles in the earthquake loading produce large damage on the specimens, and intermediate range cycles also produce damage that should not be neglected in the fatigue analysis. Originality/value Today’s building design code allows large plastic deformation to occur in steel frames during an earthquake. However, the pre-Northridge earthquake steel frames showed fatigue cracks without the expected substantial plastic deformation at beam flanges. Proposed solutions to this problem were the reduced beam section neglecting the existence of the cracks at beam–column connections. This study considered the fatigue phenomenon in steel frames and provided the first set of tested fatigue damage values for steel components subjected to realistic earthquake loadings, which offered a possible method of dealing with fatigue cracks in the steel components of a building structure.

Damage Inspection and Vulnerability Analysis of Existing Buildings with Steel Moment-Resisting Frames

Improved Seismic Design Using Bolted End Plate Connections For Steel Reinforced Concrete Composite Structures

A Model of Steel Frame for Simulating Connection Fractures

Performance Evaluation and Damage Assessment of Steel Frame Buildings under Main Shock–aftershock Earthquake Sequences

Structural Response and Damage Assessment by Enhanced Uncoupled Modal Response History Analysis

Design and analysis on the reinforcement of the beam-column connections with welded flanges and bolted webs

Earthquake-induced Damage Updating for Remaining-Life Assessment of Steel Frame Substructure Systems

Seismic loss comparison for buildings designed with ductile steel seismic force-resisting systems and with controlled rocking braced frames

Fracture Toughness Properties of Moment Resistant Column-Beam Connections

Permanent Damages of Structural Components in Existing High-Rise Steel Buildings Subjected to Rare Earthquakes

Earthquake-Induced Failure Analysis of High-Rise Steel Buildings under Sequential Long-Duration Ground Motions

Seismic resilient steel structures: A review of research, practice, challenges and opportunities

Database of tall pre-Northridge steel moment frames for earthquake performance evaluations

COLLAPSE RESISTANCE ASSESSMENT OF BUCKLING-RESTRAINED BRACED STEEL FRAMES USING COMBINED DETERMINISTIC AND PROBABILITY ANALYSIS APPROACH

Fatigue damage analysis of steel components subjected to earthquake loadings

Analysis of local buckling cumulative damage of steel frame welded connections

The earthquake damage of steel frame buildings and the causes of brittle facture

Finite element analysis on retrofitting steel moment connection with initial loads

Strength and Stress Analysis of Steel Beam-Column Connections Using Finite Element Method

Collapse Analysis of High-Rise Steel Moment Frames Incorporating Deterioration Effects of Column Axial Force – Bending Moment Interaction

Seismic vulnerability of prefabricated reinforced concrete frame structure based on local outsource steel tube bolted column–column connection