Abstract:Underwater manipulators are important robotic tools in the exploration of the ocean environment. Up to now, most existing underwater manipulators are rigid and with fixed 5 or 7 degrees of freedom (DOF), which may not be very suitable for some complicated underwater scenarios (e.g., pipe networks, narrow deep cavities, etc.). The biomimetic concept of muscles and tendons is also considered as continuum manipulators, but load capacity and operation accuracy are their essential drawbacks and thus limit their practical applications. Recently, the cable-driven technique has been developed for manipulators, which can include numerous joints and hyper-redundant DOF to execute tasks with dexterity and adaptability and thus they have strong potential for these complex underwater applications. In this paper, the design of a novel cable-driven hyper-redundant manipulator (CDHRM) is introduced, which is driven by multiple cables passing through the tubular structure from the base to the end-effector, and the joint numbers can be extended and decided by the specific underwater task requirements. The kinematic analysis of the proposed CDHRM is given which includes two parts: the cable-joint kinematics and the joint-end kinematics. The geometric relationship between the cable length and the joint angles are derived via the established geometric model for the cable-joint kinematics, and the projection relationship between the joint angles and end-effector’s pose is established via the spatial coordinate transformation matrix for the joint-end kinematics. Thus, the complex mapping relationships among the cables, joints and end-effectors are clearly achieved. To implement precise control, the kinematic control scheme is developed for the CDHRM with series-parallel connections and hyper-redundancy to achieve good tracking performance. The experiment on a real CDHRM system with five joints is carried out and the results verify the accuracy of kinematics solution, and the effectiveness of the proposed control design. Particularly, three experiments are tested in the underwater environment, which verifies its good tracking performance, load carrying and grasping capacity.

A New Cable-Driven Haptic Device for Integrating Kinesthetic and Cutaneous Display

A haptic interaction device for large scale and multitask simulations

Three Degree-of-Freedom Soft Continuum Kinesthetic Haptic Display for Telemanipulation Via Sensory Substitution at the Finger

A Novel Kinesthetic Haptic Feedback Device Driven by Soft Electrohydraulic Actuators

A Multi-Point Cutaneous Tactile Device for Fingertip Haptics

Development of an Integrated Haptic Sensor System for Multimodal Human–Computer Interaction Using Ultrasonic Array and Cable Robot

A Cable-Based Haptic Interface with a Reconfigurable Structure

Visual Tracking Control of Cable-Driven Hyper-Redundant Snake-Like Manipulator

Holdable Haptic Device for 4-DOF Motion Guidance

Kinematic and static analysis of a cable-driven 3-DOF delta parallel mechanism for haptic manipulators

Design and Kinematic Control of the Cable-Driven Hyper-Redundant Manipulator for Potential Underwater Applications

Haptic rendering method based on generalized penetration depth computation.

Design, modeling, and evaluation of a slim haptic actuator based on electrorheological fluid

Handheld Haptic Device with Coupled Bidirectional Input

Cutaneous Electrohydraulic (CUTE) Wearable Devices for Pleasant Broad-Bandwidth Haptic Cues

Hoxels: Fully 3-D Printed Soft Multi-Modal & Multi-Contact Haptic Voxel Displays for Enriched Tactile Information Transfer

Design and Evaluation of a 3-DoF Haptic Device for Directional Shear Cues on the Forearm

A 4-DoF wearable hand device for haptic rendering of surfaces and edges

A Robotic Haptic Feedback Device for Immersive Virtual Reality Applications

A 3D-Printed Soft Haptic Device with Built-in Force Sensing Delivering Bio-Mimicked Feedback

Encountered-Type Haptic Display via Tracking Calibrated Robot