Abstract:Heat treatments are used when sintering hydroxyapatite to make porous blocks and granules and during plasma spraying of coatings. Calcium : phosphorus ratio is known to affect the thermal decomposition behavior of hydroxyapatite. Hydroxyapatite with carbonate ions substituted for phosphate ions is more similar in composition to bone mineral. While it has been shown that carbonate apatite may be sintered, relatively little is known about its high temperature stability. Various atmospheres have been used in investigations into the thermal stability of hydroxyapatites and carbonate hydroxyapatites, including nitrogen, wet carbon dioxide air, water vapor and wet oxygen, but few of these studies were directly comparable. Previous work has shown that loss of carbonate from CHA at high temperature is time dependent, which suggests that rapid high temperature treatment may prevent carbonate loss during processing. This study investigated the effect of dry carbon dioxide, carbon dioxide containing 3% water, nitrogen and nitrogen containing 3% water on the phase composition of hydroxyapatite containing between 1.0 and 11.5 wt % carbonate rapidly heated to temperatures of between 700 and 1400 degrees C. Carbonate ion substitution was observed to decrease the temperature at which crystallisation occurred to a minimum of 700 degrees C for 11.8 wt % carbonate apatite heated in wet atmospheres. Atmosphere was found to appreciably affect the crystallization temperature and phase transformations of carbonate apatite containing 7.8 wt % carbonate. In wet and dry carbon dioxide atmospheres, crystallisation began in this material at 1100 and 900 degrees C, betaTCP was formed at 1500 and 1300 degrees C respectively. The high temperature decomposition of carbonate hydroxyapatite would appear to depend on the composition of the apatite and the atmosphere in which it is heated.

The Thermal Stability of Hydroxyapatite: A Review

Effect of Ca/P Molar Ratio and Heat Treatment on Thermal Decomposition and Reconstitution of Hydroxyapatite

Preparation and thermal stability analysis of hydroxyapatite derived from the precipitation process and microwave irradiation method

Thermal Stability of Hydroxyapatite Whiskers Prepared by Homogenous Precipitation

Thermal Stability of Nonstoichiometric Stronium-Incorporated Hydroxyapatite Synthesized with A Hydration Process

Effect of Heating Mode on Thermal Stability of Nanocrystalline Hydroxyapatite

Thermal Stability and Mechanical Properties of Zirconia–hydroxyapatite Composites

High-Temperature Characteristics of Synthetic Hydroxyapatite

Thermal decomposition of hydroxyapatite structure induced by titanium and its dioxide

Effect of Potassium on Morphology and Thermal Stability of Hydroxyapatite Whiskers

Crystallization Characteristics and Thermal Stability of Fluor-Hydroxyapatite Composites with Zirconia

Wet Synthesis and Characterization of Lanthanum-Substituted Hydroxyapatite

Phase Transitions of Hydroxyapatite Coatings During Post-Heat Treatment and Their Performances under Ultrasonic Tests

The Effect of Heat-Treatment and Bioresorbability of Silicate-Containing Hydroxyapatite

Thermal Stability of Porous A-type Carbonated Hydroxyapatite Spheres

In vitro characterization of postheat-treated plasma-sprayed hydroxyapatite coatings

Effect of the Temperature on Synthesizing of Hydroxyapatite

Thermal decomposition of synthesised carbonate hydroxyapatite

Thermal stability of stoichiometric strontium-incorporated hydroxyapatite

Calcined Hydroxyapatite Powders with Increased Chemical Stabilities and Dispersibility

Morphologies of Hydroxyapatite Nanoparticles Adjusted by Organic Additives in Hydrothermal Synthesis