Abstract:The aim of this paper is to investigate the impact of gas compressibility on forced convection through commercial stainless steel microtubes with an inner diameter of 750μm, 510μm and 170μm by combining experimental data with numerical simulations. The analysis covers both transitional and turbulent flow regimes (3000<Re<12,000). The results have evidenced that compressibility effects can significantly enhance convective heat transfer when the gas flow is heated by the walls (H boundary condition). This enhancement turns out to be more remarkable for microtubes with smaller inner diameter (lower than 200μm). In order to explore in-depth the heat transfer mechanism along the microtube in presence of non negligible compressibility effects, the experimental data have been integrated with the numerical results obtained by modeling the fluid flow through the microtube with the adoption of the Arbitrary–Lagrangian–Eulerian (ALE) method and the Lam–Bremhorst Low–Reynolds number turbulence model in order to evaluate eddy viscosity coefficient and turbulence energy within the gas flow. The results presented in this work put in evidence that the integration of the experimental data with the numerical results is strongly beneficial in order to obtain a deep investigation of the physics of micro convection for compressible flows. The experimental values of the Nusselt numbers obtained for three different microtubes have been compared with both classical correlations validated for conventional pipes and specific correlations proposed for microtubes. This comparison highlights that the conventional correlations still holds for gas flow convection through microtubes when the compressibility effect is not significant. On the contrary, when compressibility is no longer negligible, the conventional correlations tend to underestimate the value of the Nusselt number. It is also demonstrated that the specific correlations proposed for the prediction of the Nusselt number in microtubes fail in presence of strong compressibility effects.

Friction resistance for gas flow in smooth microtubes

An Experiment-Based Comparative Investigation of Correlations for Microtube Gas Flow

Experimental study on the characteristics of resistance for gas flow in microtubes

Numerical Investigation On The Effect Of Roughness On The Flow Resistance For Incompressible Fluid Flow In Microtubes

Experimental study on friction characteristics in microtube

Effect of Reversible Work and Viscous Dissipation on Gas Flow Characteristics in a Microtube

Experimental Study of Compressibility, Roughness and Rarefaction Influences on Microchannel Flow

Variations in gas temperature and average velocity during laminar-turbulent transition in high-speed gas flow through microtubes

Resistance Characteristics of 19.6 μm Microtube

Experimental study on flow characteristics of liquid in circular microtubes

Experimental and numerical investigation of forced convection of subsonic gas flows in microtubes

Compressibility Effect on the Gas Flow and Heat Transfer in a Microtube

Transitional And Turbulent Convective Heat Transfer Of Compressible Gas Flows Through Microtubes

Experimental and Numerical Studies of Liquid Flow and Heat Transfer in Microtubes

Experimental study on influence of microscale effects on liquid flow characteristic in microtubes

EXPERIMENTAL STUDY OF TRANSITIONAL AND TURBULENT FLOW IN A MICROTUBE

Experimental Investigation on Flow and Heat Transfer in Rough Microtube

Flow and Heat Transfer in 0.0196mm Quartz Microtube

Experimental Study on Flow and Heat Transfer in a 19.6-Μm Microtube

Experimental Analysis of Gas Flow Forced Convection in Microtubes

The Study on the Flow of the Kerosene in Micro Tube