Abstract:Tungsten oxide has received plenty of attention as a potential anode material for lithium‐ion batteries (LIBs) due to the high intrinsic density and abundant framework diversity. However, the tremendous structural and volumetric changes of tungsten oxide (WO3) restrict the commercial application. A novel embedded one‐dimensional (1D) structure composite of the WO3 and N‐doped carbon nanofibers (WO3@N‐CNFs) has been prepared by combining convenient hydrothermal and electrospinning processes. The WO3 nanowires are firmly wrapped in the N‐CNFs and formed an embedded double 1D structure, which can significantly improve the structure stability of the composite. Therefore, the WO3@N‐CNFs delivers a high specific capacity of 960 mAh/g after 300 cycles at 0.2 A/g, and 550 mAh/g after 1300 cycles at 2 A/g. Moreover, the initial Coulomb efficiency of WO3@N‐CNFs is enhanced to more than 80 %. The electrochemical performance is better than those from most WO3‐based carbon composite materials, which can be ascribed to the synergy effects of the WO3 nanorods and the nitrogen doping in 1D carbon nanofibers. As a consequence, the WO3@N‐CNFs can be a promising anode material with the extraordinary long‐term cycling performance at high current densities, and provide a new idea for the commercialization of WO3‐based carbon composite materials. Double trouble: The double 1D composite of hydrothermal ultrafine WOx nanowires and electrospinning N‐CNF exhibits remarkably improved rate performance, long‐term cycling stability and electrical conductivity as anode material of advanced lithium‐ion batteries.

Li-driven electrochemical properties of WO<sub>3</sub> nanorods

Structural Construction of WO3 Nanorods as Anode Materials for Lithium-Ion Batteries to Improve Their Electrochemical Performance

Improved Electrochromic Performance of WO3 Films with Size Controlled Nanorods

Lithiation of ZnO Nanowires Studied by In-Situ Transmission Electron Microscopy and Theoretical Analysis

Novel Route to WO<i><sub>x</sub></i>Nanorods and WS<sub>2</sub>Nanotubes from WS<sub>2</sub>Inorganic Fullerenes

Large-scale Synthesis of Single-Crystal Hexagonal Tungsten Trioxide Nanowires and Electrochemical Lithium Intercalation into the Nanocrystals

Synthesis of oxygen vacancies implanted ultrathin WO3-x nanorods/reduced graphene oxide anode with outstanding Li-ion storage

Nanostructured WO3 thin film as a new anode material for lithium-ion batteries

Novel route to WOx nanorods and WS2 nanotubes from WS2 inorganic fullerenes.

Electrochemical Behavior of Alpha-Moo3 Nanorods As Cathode Materials for Rechargeable Lithium Batteries.

Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries

Preparation and Electrochemical Characterization of Ultrathin WO3−x /C Nanosheets As Anode Materials in Lithium Ion Batteries

From Cobalt Nitrate Carbonate Hydroxide Hydrate Nanowires To Porous Co3o4 Nanorods For High Performance Lithium-Ion Battery Electrodes

Architecting Hierarchical WO3 Agglomerates Assembled With Straight and Parallel Aligned Nanoribbons Enabling High Capacity and Robust Stability of Lithium Storage

Synthesis of LiV 3 O 8 nanorods and shape-dependent electrochemical performance

The Preparation and Lithium Storage Properties of WSe2 Nanorods Anchored on N-doped 3D Graphene

Synergistically Boosting Li Storage Performance of MnWO4 Nanorods Anode via Carbon Coating and Additives

Preparation of Hexagonal Ultrathin WO3 Nano-Ribbons and Their Electrochemical Performance As an Anode Material in Lithium Ion Batteries

Embedded Double One‐Dimensional Composites of WO 3 @N‐Doped Carbon Nanofibers for Superior and Stabilized Lithium Storage

Synthesis and Electrochemical Properties of Single-Crystalline Liv3o8 Nanorods As Cathode Materials for Rechargeable Lithium Batteries

Synthesis, Characterization and Lithium-Storage Performance of MoO2/carbon Hybrid Nanowires