Estimation of energy consumption efficiency in office rooms cooling systems to create thermal comfort for the user
N P Lisa,Z Zuraihan,R Fernand,D Siska
DOI: https://doi.org/10.1088/1755-1315/738/1/012016
2021-04-01
IOP Conference Series: Earth and Environmental Science
Abstract:Abstract Conservation and energy efficiency in air conditioning systems are very relevant to be conducted to increase efficiency and save energy as an effort to reduce energy consumption in buildings and reduce the formation of CO2 gas emissions, which are one of the main causes of increasing environmental temperature. Offices and settlements have a quite large dependence on energy. At the office, for instance, the spatial comfort greatly affects the user’s mood and the quality of work produced. Air conditioning or air controlling system is an effort to process the air to control room temperature, relative humidity, air quality, and its refreshment to maintain comfort requirements for room users. The purpose of this research was to assess the measurement of energy consumption used in the office of three floors and to respond to energy consumption savings that are used as an effort to yield efficient energy use, especially in air conditioning systems. The research method used is the Ecotect v.5 simulations, with the characteristics of a closed office space model and full of air conditioning throughout the rooms. The energy consumption in a room cooling system was calculated by using SNI 6196-2011. The amount of heat energy accumulated in each room, which is influenced by solar radiation, space leveling, activity, and lighting was also measured. By calculating the temperature distribution in the space of each floor by comparing the Ecotech v.5 simulation results with the existing EEI (Energy Efficient Index) field measurements generated by 46.22 kWh/H/m2/day based on the calculation of working operational hours, it was assumed that 8 hours/day with real operational 2920 hours/year and the total energy consumption of 16330 kWh/year were considered as a very wasteful criterion. The temperature on each floor differs from 26.8°C to 29°C, the difference between the simulation calculation and the existing measurement was 0.78°C, with an average temperature of simulation result was 27.53°C, the existing was 26.75°C. Besides, the temperature obtained was different in each room, this was influenced by the room orientation to the sun which affected the comfort level of the room