Abstract:Economic viability of small launch vehicles, i.e., microlaunchers, is impaired by several factors, one of which is a higher dry to wet mass ratio as compared to conventional size launchers. Although reusability may reduce launch cost, it can drive dry and/or wet mass to unfeasibly high levels. In particular, for load-bearing components that are exposed to convective heating during the aerothermodynamic phase of the re-entry, the mass increase due to the presence of a thermal protection system (TPS) must be considered. Examples of such components are aerodynamic drag devices (ADDs), which are extended during the re-entry. These should withstand high mechanical loading, be thermally protected to avoid failure, and be reusable. Ablative materials can offer lightweight thermal protection, but they represent an add-on mass for the structure and they are rarely reusable. Similarly, TPS based on ceramic matrix composite (CMC) tiles represent an additional mass. To tackle this issue, so-called integrated thermal protection systems (ITPS) composed of CMC sandwich structures were introduced in the literature. The aim is to obtain a load-bearing structure that is at the same time the thermally protective layer. However, a comprehensive description of the real lightweight potential of such solutions compared to ablative materials with the corresponding sub-structures is, to the authors' knowledge, not yet presented. Thus, based on the design of an ADD, this work aims to holistically describe such load bearing components and to compare different TPS solutions. Both thermal and preliminary mechanical designs are discussed. Additionally, a novel concept is proposed, which is based on the use of phase change materials (PCMs) embedded within a metallic sandwich structure with an additively manufactured lattice core. Such a solution can be beneficial due to the combination of both the high specific stiffness of lattice structures and the high mass-specific thermal energy storage potential of PCMs. The study is conducted with reference to the first stage of the microlauncher analysed within the European Horizon-2020 project named Recovery and Return To Base (RRTB).

A review of researches of light-weight ablators

An overview on low-density ablators

Current Situation Development of Lightweight Ablation Materials for Thermal Protection

Numerical analysis of ablative behavior of silicone resin coated carbon fabric

Multiphysical Behavior of a Lightweight Ablator: Experiments, Modeling, and Analysis

The art of framework construction: hollow-structured materials toward high-efficiency electromagnetic wave absorption

Recent Progress in the Development of Lightweight Porous Materials and Structures

A facile in-situ strategy to fabricate lightweight carbon fiber/silicone-phenolic aerogel composites with superior toughness and ablation performance

Comparison of ablators for the polar direct drive exploding pusher platform

A Review of Lightweight Design for Space Mirror Core Structure: Tradition and Future

The Study Status of Ablative Laser Propulsion

Design of ablation resistant/heat insulation/lightweight integrated thermal protection material for extreme aerothermodynamic environment

Research Advances in Laser Ablation of Hard Tissue

Oxygen diffusion and ablation analysis on micro-scale of C/C composite

Comprehensive Comparison of Different Integrated Thermal Protection Systems with Ablative Materials for Load-Bearing Components of Reusable Launch Vehicles

Study on the Ablation Resistance of Carbon-Based Composites in Reentry Simulation Environments

Flow Mechanics in Ablative Thermal Protection Systems

Nano-silica Modified Lightweight and High-Toughness Carbon Fiber/phenolic Ablator with Excellent Thermal Insulation and Ablation Performance

Facile fabrication of lightweight mullite fiber/phenolic ablator with low thermal conductivity via ambient pressure impregnation

A Study of Microwave Ablation with Hollow Antenna