Abstract:The methane dry reforming reaction can simultaneously convert two greenhouse gases (CH 4 and CO 2 ), which has significantly environmental and economic benefits. Nickel-based catalysts have been widely used in methane dry reforming in past decade due to their low cost and high activity. However, the sintering and coke deposition of catalysts severely limit their industrial applications. In this paper, three Ni/SiO 2 catalysts prepared by different methods were systematically studied, and the samples obtained by the ammonia evaporation method exhibited excellent catalytic performance. The characterization results such as H 2 -TPR, XPS and TEM confirmed that the excellent performance was mainly attributed to the catalyst with smaller Ni particles, stronger metal-support interactions, and abundant Ni-O-Si units on the catalyst surface. The anti-sintering/-coking properties of the catalyst were significantly improved. However, the Ni/SiO 2 -IM catalyst prepared by impregnation method had uneven distribution of nickel species and large particles, and weak metal-support interactions, showing poor catalytic performance in methane dry reforming. Since the nickel species were encapsulated by the SiO 4 tetrahedral network, the Ni/SiO 2 -SG catalyst prepared by sol-gel method could not expose more effective active sites even if the nickel species were uniformly dispersed, resulting in poor dry reforming performance. This study provides guidance for the preparation of novel anti-sintering/-coking nickel-based catalysts.

Effects of the Preparation Methods on the Properties of Ni-La2o3-Sio2 Catalysts for M-Dinitrobenzene Hydrogenation

Hydrogenation of M-Dinitrobenzene to M-Phenylenediamine over La2o3-Promoted Ni/Sio2 Catalysts

Sol-Gel Preparation, Characterization and Hydrogenation Property of Silica Supported Ni Catalyst

Synthesis of m-phenylenediamine from m-dinitrobenzene over silica-supported nickel catalyst

Study on the Ni Supported Catalysts Used for Hydrogenation of IPN to Produce MXDA

Liquid-Phase Hydrogenation of Nitrobenzene over Ag-Ni Bimetallic Catalysts Prepared by Adsorption Phase Synthesis

EFFECT OF PROMOTERS ON PHYSICO-CHEMICAL PROPERTIS AND CATALYTIC PERFORMANCE OF Ni/SiO2 IN m-DINITROBENZENE HYDROGENATION

Amorphous Ni-B/γ-Al2O3 catalyst prepared in a modified drying approach and its excellent activity in benzene hydrogenation

Effect of desiccation of the catalyst precursor on the performance of amorphous Ni-B/gamma-Al2O3 catalyst

A Novel Catalyst for Liquid Phase Hydrogenation of M-Dinitrobenzene to M-Phenylenediamine

Effect of Desiccation of the Catalyst Precursor on the Performance of Amorphous Ni-B/γ-Al2O3 Catalyst

Effects of Preparation Method on the Performance of Ni/Al 2 O 3 Catalysts for Hydrogen Production by Bio-Oil Steam Reforming

Effects of preparation conditions for Ni/γ-Al2O3 catalyst on saturated hydrogenation of naphthalene

Effect of Preparation Process on Compressive Strength and Hydrogenation Performance of Raney-Ni/Al2o3 Catalyst

Liquid-phase hydrogenation of m-chloronitrobenzene over Ni-M-P amorphous alloy catalyst

Effects of Metal-Support Interactions and Interfaces on Catalytic Performance over M2O3- ( M = La , Al-) Supported Ni Catalysts

Preparation of Highly Loaded and Active Ni/Al_2O_3 Catalysts for the Hydrogenation of Aromatic Rings

Impact of preparation method on nickel speciation and methane dry reforming performance of Ni/SiO2 catalysts

Effects of the activation method on the performance of base metal catalysts prepared by wet impregnation for toluene hydrogenation in liquid phase

Sol–gel preparation of crystalline Ni 12 P 5 /N-doped carbon and amorphous Ni–P–C catalysts and their high catalytic performances toward hydrogenation reduction reaction of 4-nitrophenol

Effect of preparation method on the hydrogen production from methanol steam reforming over binary Cu/ZrO2 catalysts