Abstract:The Langevin transducer is a widely used power ultrasonic device across both medical and industrial applications, from orthopaedic surgery to drilling and welding. It is a sandwich-type device which typically consists of piezoelectric ceramic rings between two metallic end-masses. The transducer is commonly operated at a particular resonant mode to deliver ultrasonic vibrations to a target structure of interest, and is generally modelled as using approaches including the transfer matrix method and electromechanical equivalent circuit methods. Here, we propose a variational framework to study the dynamics of the Langevin transducer based on the Timoshenko-Ehrenfest beam theory and Hamilton's principle. The variational equation derived from this model is then discretized by the standard finite element method with spectral elements. To verify the proposed one-dimensional electromechanical model, the computed resonance frequencies, or natural frequencies, of the one-dimensional model are compared to those of a three-dimensional finite element model with respect to varying geometry parameters characterizing the transducer. The results of the reduced one-dimensional and full three-dimensional models are then compared to those measured through an experimental investigation consisting of laser Doppler vibrometry. This is undertaken for the first ten eigenfrequencies, including longitudinal and bending modes, where normalized amplitudes and vibration mode shapes are reported. The close correlation between modelling and experiment demonstrates that the proposed one-dimensional electromechanical model can deliver results consistent with the full three-dimensional model and from experiment, thus verifying a rapid and reliable method for studying the free vibrations and dynamics of the Langevin transducer which accounts for the axial vibrations of the piezoelectric ceramic stack in all cases.

Modelling of Reciprocal Transducer System Accounting for Nonlinear Constitutive Relations

Modelling of Nonlinear Dynamics for Reciprocal Multi-Layer Piezoceramic Transducer Systems

Modeling of Nonlinear Responses for Reciprocal Transducers Involving Polarization Switching

Simulation of nonlinear thermomechanical waves with an empirical low dimensional model

Analytical Modeling of Resonant Converters in Frequency Domain for Wireless Power Transfer: Continuous Current Mode (CCM) Operation

Model of Nonlinear Coupled Thermo-Hydro-elastodynamics Response for a Saturated Poroelastic Medium

Modeling the Rate Dependent Hysteretic Dynamics of Magnetostrictive Transducers

Transient Modelling of Loss and Thermal Dynamics in Power Semiconductor Devices

Transient MR fluid flows in valve mode using a non-convex constitutive relation

Frequency-dependent equivalent modelling of broadband air-coupled transducers

Multiphysics Modeling of A Lorentz Force-Based Meander Coil Electromagnetic Acoustic Transducer Via Steady-State and Transient Analyses

Underwater Acoustic Non-Reciprocal Manipulation Based on Dynamic-Modulation Structures

A Timoshenko-Ehrenfest beam model for simulating Langevin transducer dynamics

Analytical Modeling for Probe Impedance Using Reflection and Transmission Theory in Eddy Current Testing

Simulation Of Three Constitutive Behaviors Based On Nonlinear Ultrasound

Designing and Calculating the Nonlinear Elastic Characteristic of Longitudinal-Transverse Transducers of an Ultrasonic Medical Instrument Based on the Method of Successive Loadings

Nonreciprocity and Mode Conversion in a Spatiotemporally Modulated Elastic Wave Circulator

Accurate Coupling Coefficient Model for Eddy Current Sensor Displacement Calculation

Modeling of an Omni-Directional Electromagnetic Acoustic Transducer Driven by the Lorentz Force Mechanism

Linear Nonreciprocal Dynamics of Coupled Modulated Systems

Modeling of Lorentz forces and radiated wave fields for bulk wave electromagnetic acoustic transducers