Abstract:As promising cathode materials for lithium-ion batteries (LIBs), Fe-containing Li-rich compounds of Li1+x Fe0.1Ni0.15Mn0.55O y (0 ≤ x ≤ 0.3 and 1.9 ≤ y ≤ 2.05) have been successfully synthesized by calcining the spherical precursors with appropriate amounts of lithium carbonate. The structures, morphologies, and chemical states of these compounds are characterized to better understand the corresponding electrochemical performances. With an increase of lithium content, Li1+x Fe0.1Ni0.15Mn0.55O y evolves from a complex layered-spinel structure to a layered structure. The lithium content also affects the average size and adhesion of the primary particles. At 0.1 C, sample x = 0.1 shows the highest first charge/discharge specific capacities (338.7 and 254.3 mA h g-1), the highest first Coulombic efficiency (75.1%), the lowest first irreversible capacity loss (84.4 mA h g-1), the highest reversible discharge specific capacity, and good rate capability. Notably, voltage fading can be alleviated through the adjustment of structural features. Such superior electrochemical performances of sample x = 0.1 are ascribed to the hierarchical micro-/nanostructure, the harmonious existence of complex layered-spinel phase, and the low charge-transfer resistance. An integral view of structure evolution from layered to spinel during synthetic control and cycling process is provided to broaden the performance scope of Li-Fe-Ni-Mn-O cathodes for LIBs.

Synthesis and Performance of Cathode Materials Li_(0.97)Re_(0.01)FePO_4 for Lithium Ion Batteries

Effect of Rare Earth Ions Doping on the Structure and Performance of LiFePO4

Influence of Lanthanum Doping on Performance of LiFePO4 Cathode Materials for Lithium-Ion Batteries

Y3+ doping and electrochemical properties of LiFe0.5Mn0.5PO4@C cathode material for lithium-ion batteries

Synthesis and electrochemical performance of Li1-xLaxFe1-yMgyPO4/C cathode

Synthesis of Cathode Material LiFePO4 for Rechargeable Lithium-Ion Battery by Co-Precipitation Method

Electrochemical performance of rare-earth doped LiMn2O4 spinel cathode materials for Li-ion rechargeable battery

Enhanced Electrochemical Performance of Rare Earth‐Doped Amorphous LiFePO4 Cathodes for Lithium‐Ion Batteries

Synthesis of rare Earth element doped LiMn1.5Ni0.5O4 as a lithium-ion battery cathode material using sonochemical method

Physical and electrochemical properties of La-doped lithium iron phosphate

Effect of lanthanum and yttrium doped LiFePO4 cathodes on electrochemical performance of lithium-ion battery

Synthesis and Electrochemical Properties of Non-Stoichiometric Li_xM_(0.01)FePO_4

Electrochemical Performance and in Situ Phase Transition Analysis of Iron-Doped Lithium Manganese Phosphate

Effects of Neodymium Aliovalent Substitution on the Structure and Electrochemical Performance of LiFePO4

Synthesis And Characterizations Of V-Doped Lifepo4 Cathode Materials For Rechargeable Lithium-Ion Batteries

Fe Doped Li1.2Mn0.6-x/2Ni0.2-x/2FexO2 (x≤0.1) As Cathode Materials for Lithium-Ion Batteries

Physical and electrochemical properties of la-doped lithium iron phosphate electrodes

Synthesis and Electrochemical Characterization of Li1.05RExCryMn2−x−yO4 Spinel As Cathode Material for Rechargeable Li-battery

Structure Evolution from Layered to Spinel during Synthetic Control and Cycling Process of Fe-Containing Li-Rich Cathode Materials for Lithium-Ion Batteries

The prepared and electrochemical property of Mg-doped LiMn0.6Fe0.4PO4/C as cathode materials for lithium-ion batteries

Synthesis and Performance of Mn-doped Li3Fe2(PO4)3 Materials