Abstract:Monodisperse metal nanoparticles (NPs) with high activity and selectivity are among the most important catalytic materials. However, the intrinsic process to obtain well-dispersed metal NPs with tunable high density (ranging from 1013 to 1016 m−2) and thermal stability is not yet well understood. Herein, the preparation of metal NPs with tunable areal density from layered double hydroxide (LDH) precursors in which the metal cations were pre-dispersed at an atomic scale was explored. Large quantities of mesopores induced by the Kirkendall effect were formed on the as-calcined layered double oxide (LDO) flakes. The O atoms bonded with Fe3+ cations were easy to be extracted at a temperature higher than 750 °C, which greatly increased the mobility of Fe. Consequently, coalescence of the reduced Fe atoms into large NPs enhanced the Kirkendall effect, leading to the formation of monodisperse embedded Fe NPs on the porous LDO flakes. The flake morphology of LDHs was well preserved, and the areal density of Fe NPs on the LDO flakes can be well controlled through adjusting the Fe content in the LDH precursor. With higher Fe loading, larger Fe NPs with higher areal density were available. When the areal density was increased from 0.039 to 0.55, and to 2.1 × 1015 m−2, the Fe NPs embedded on the LDO flakes exhibited good catalytic performance for the growth of entangled carbon nanotubes (CNTs), aligned CNTs, and double helical CNTs, respectively. This work provides not only new insights into the chemical evolution of monodisperse NPs from an atomic metal-dispersed precursor, but also a general route to obtain tunable NPs as heterogeneous catalysts for chemical and material production.

Layered Double Hydroxides As Catalysts for the Efficient Growth of High Quality Single-Walled Carbon Nanotubes in a Fluidized Bed Reactor

Subnanometer Single-Walled Carbon Nanotube Growth from Fe-Containing Layered Double Hydroxides

Catalytic Mechanism of Co-containing Layered Double Hydroxide (Co-LDH) as a Precursor in Carbon Nanotube (CNT) Synthesis

Controllable bulk growth of few-layer graphene/single-walled carbon nanotube hybrids containing Fe@C nanoparticles in a fluidized bed reactor

Catalytic Synthesis of Carbon Nanostructures Using Layered Double Hydroxides As Catalyst Precursors

Facile catalyst deposition using mists for fluidized-bed production of sub-millimeter-long carbon nanotubes

Monodisperse Embedded Nanoparticles Derived from an Atomic Metal-Dispersed Precursor of Layered Double Hydroxide for Architectured Carbon Nanotube Formation

Thin-Film Metal Catalyst For The Production Of Multi-Wall And Single-Wall Carbon Nanotubes

Porous and Lamella-like Fe/MgO Catalysts Prepared under Hydrothermal Conditions for High-Yield Synthesis of Double-Walled Carbon Nanotubes

Mass Production of Aligned Carbon Nanotube Arrays by Fluidized Bed Catalytic Chemical Vapor Deposition

Synthesis Of Carbon Nanotubes By Selective Reduction Of Mixed Oxides

Enhanced Growth of Carbon Nanotube Bundles in a Magnetically Assisted Fluidized Bed Chemical Vapor Deposition

Hierarchical hollow Ni/γ-Al2O3 catalyst derived from flower-like Ni-Al layered double hydroxide with stable catalytic performance for CO2 methanation

High-Density Growth of Single-Wall Carbon Nanotubes on Silicon by Fabrication of Nanosized Catalyst Thin Films

Preferential Growth of Short Aligned, Metallic-Rich Single-Walled Carbon Nanotubes from Perpendicular Layered Double Hydroxide Film.

Embedded high density metal nanoparticles with extraordinary thermal stability derived from guest-host mediated layered double hydroxides.

Very High-Quality Single-Walled Carbon Nanotubes Grown Using a Structured and Tunable Porous Fe/MgO Catalyst

Selective Synthesis of Single/Double/Multi-walled Carbon Nanotubes on MgO-Supported Fe Catalyst

Vertically aligned carbon nanotube arrays grown on a lamellar catalyst by fluidized bed catalytic chemical vapor deposition

Atomic Layer Deposition of Al2O3 Catalysts for Narrow Diameter Distributed Single-Walled Carbon Nanotube Arrays Growth

Robust Growth of Herringbone Carbon Nanofibers on Layered Double Hydroxide Derived Catalysts and Their Applications As Anodes for Li-Ion Batteries