Abstract:In recent years, asynchronous circuits have become more popular in neural network chips and the Internet of Things (IoT) due to their potential advantages of low-power consumption and high performance. However, the existing design methods for asynchronous circuits are still constrained by critical paths, increasing power consumption and hindering the further improvement of performance. In this article, a fully digital design method for frequency adaptation asynchronous bundled-data (BD) circuits is proposed. The proposed method is straightforward, effective, widely applicable, and independent of asynchronous controllers. It allows to automatically work on different frequencies as required, which can improve performance and reduce power consumption, achieving better-than-worst-case. To verify the proposed method, an asynchronous RISC-V processor with vector acceleration extension is designed on both TSMC 65-nm process and field-programmable gate array (FPGA) platform. According to the postlayout simulation results, compared with its synchronous version, the asynchronous processor achieves a 10% speed improvement (from 227.3 to 250 MHz) with a 37% power reduction (from 135 to 85 $\mu$ W/MHz) under ideal conditions. Even under the worst conditions, the asynchronous processor achieves equivalent performance to the synchronous processor, while still reducing power consumption by 29% (from 133 to 95 $\mu$ W/MHz). On the FPGA platform, asynchronous processor also achieves higher speed while lower power consumption.

Design and VLSI Implementation of an Asynchronous Microprocessor Based on Transport Triggered Architecture

DSS: Applying asynchronous techniques to architectures exploiting ILP at compile time

Asynchronous Pipeline Micro-Control-Unit (mcu) Chip Design

A Low-Power Asynchronous RISC-V Processor with Propagated Timing Constraints Method

Towards Energy-Efficient Asynchronous Circuit Design with Flip-Flop-to-Latch Replacement

The Design of ASIP Based on TTA Methodology

An Asynchronous Design Method and Its Application on a Low-Power RFID Baseband Processor

Toward Efficient Asynchronous Circuits Design Flow Using Backward Delay Propagation Constraint

Eliminating Timing Errors Through Collaborative Design to Maximize the Throughput

Implementation of an Instruction Dispatch Unit Applied to Digital Signal Processors with VLIW Architecture

A New Implementation of a 16-Bit Self-Timed ALU for Asynchronous Microprocessors

A Robust Asynchronous Approach for Realizing Ultra-Low Power Digital Self-Adaptive VDD Scaling System

An Asynchronous Bundled-Data Template with Current Sensing Completion Detection Technique

Architecture Design of Simultaneous Multithreading VLIW DSP

A Design Flow for Click-Based Asynchronous Circuits Design with Conventional EDA Tools.

Better-Than-Worst-Case: A Frequency Adaptation Asynchronous RISC-V Core With Vector Extension

LAC: A Novel Lightweight Asynchronous Controller with Optimized Phase Shift

Minterm Based Synthesis and Optimization of Asynchronous Dual-rail Encoded Functional Modules

Asynchronous Techniques for System-on-Chip Design

Asynchronous Pipeline VLSI Designing under Synchronous VLSI Design Environment

Design Of Variable Latency Adder Based On Present And Transitional States Prediction