Abstract:First of all, it is necessary to accurately measure the spatial positions of weld grooves when the welding robot performs the automated welding of large workpieces. However, laser stripes are easily affected by light sources and environmental noises in the measurement process based on image recognition. The work designed an automatic measuring system for V-shaped weld seams of large workpieces. First, a mathematical model for calculating the spatial positions of welds was established, and then, a line laser was incident on workpiece grooves to form multiple line segments. Then, image analysis was performed on the intersection of each line segment. These intersection points were brought into the mathematical model after they were mapped to the feature points in the image to calculate the spatial position corresponding to each feature point. Finally, the spatial positions of all discrete points at different positions of the welding seam of the large workpiece were obtained by scanning multiple laser lines to complete the measurement of the entire welding seam. The work proposed a new idea of extracting feature points from weld images that combined Radon transformation, Harris corner detection, and mean clustering to improve the stability and automation of weld location extraction. Multiple groups of different parameter experiments were used to measure two groups of different bevel angles with the length, width, and height of 180 × 60 × 30 mm and 180 × 36.64 × 30 mm, respectively. The maximum measurement error was 0.653 mm, with a minimum measurement error of 0.001 mm, an average measurement error of 0.147 mm, and an average measurement accuracy above 99%. Results showed that the research method with high robustness and noise resistance rapidly could realize the automatic and accurate measurement of weld seams.

Three-dimensional Measurement of Weld Seam Based on Laser Vision

Seam Three-Dimensional Recovery Using Vision Sensor Based on Circular Laser

Real-time Welded Seam 3D Calculation System Based on Laser Vision Sensor

3D vision-based weld seam extraction method

3D reconstruction of complex spatial weld seam for autonomous welding by laser structured light scanning

Calibration of scanning circular laser and seam detecting

A 3D Vision-Based Weld Seam Extraction Method for Arbitrarily Placed Spatial Planar Weldments

Study On Welded Seam Recognition Using Circular Laser Vision Sensor

Development of an automatic post-weld inspection system based on laser vision

A Laser-Based Vision System for Weld Quality Inspection

Additive seam tracking technology based on laser vision

An automatic measurement method for hull weld seam dimensions based on 3D laser scanning

An Active Vision Sensing Method for Welded Seams Location Using “circle–depth Relation” Algorithm

Weld Inspection and Tracking of Laser Welding Head

A Method to Measure Welding Deformation of Plate by Three Dimensional Laser Scanner

Seam detection method design and automatic calibration based on an active light coaxial visual sensor

A Novel 3D Complex Welding Seam Tracking Method in Symmetrical Robotic MAG Welding Process Using a Laser Vision Sensing

Measurement and Defect Detection of the Weld Bead Based on Online Vision Inspection

A V-shaped weld seam measuring system for large workpieces based on image recognition

Internal Parameters Calibration of Vision Sensor and Application of High Precision Integrated Detection in Intelligent Welding Based on Plane Fitting

Tube Sheet Annular Seam Measurement Technology Based on Laser Collaboration With Vision Sensor