Abstract:Various mechanical properties of single-walled carbon nanotubes (SWCNT) and double-walled carbon nanotubes (DWCNT) are evaluated using molecular dynamics (MD) simulations. A tensioning process was first performed on a SWCNT whose interaction is based on the Brenner’s ‘second generation’ potential under varying length–diameter ratios and strain rates, in order to understand the SWCNT’s behaviour under axial tension. The results showed an increase in the SWCNT’s ultimate tensile strength and a decrease in critical strain given the conditions of increasing strain rate and a decreasing length–diameter ratio. Comparison was done with previous studies on axial tensioning of SWCNT to validate the results obtained from the set-up, based on the general stress–strain relationship and key mechanical properties such as the strain at failure and the Young’s modulus. A DWCNT was then constructed, and Lennard-Jones ‘12-6’ potential was used to describe the energy present between the nanotube layers. Extraction of the inner tube in a DWCNT was performed using two inner wall tubings of different diameters to draw comparison to the energies needed to separate fully the outer and inner tubing. Finally, a bending test was performed on two DWCNTs with different intertube separations. Insights into the entire bending process were obtained through analyses of the variations in the strain energy characteristic of the surface atoms near the bending site, as the DWCNT is gradually bent until failure.

Buckling and axially compressive properties of perfect and defective single-walled carbon nanotubes

Molecular Dynamics Study Of Dynamic Buckling Properties Of Nanowires With Defects

Effect of small length scale on elastic buckling of multi-walled carbon nanotubes under radial pressure

Transverse vibrations of double-walled carbon nanotubes under compressive axial load

Numerical Exploration Of The Defect'S Effect On Mechanical Properties Of Nanowires Under Torsion

Coupled Thermomechanics Of Single-Wall Carbon Nanotubes

A study on the effect of defects on the buckling of double-walled carbon nanotubes under compression based on a new atomic-continuum coupling method

Buckling Analyses of Double-Wall Carbon Nanotubes: A Shell Theory Based on the Interatomic Potential

Buckling behaviors of single-walled carbon nanotubes inserted with a linear carbon-atom chain

Axisymmetric compressive buckling of multi-walled carbon nanotubes under different boundary conditions

The Controllable Mechanical Properties of Coiled Carbon Nanotubes with Stone–Wales and Vacancy Defects

Twist-Direction-Dependent Buckling Behaviors of Single-Walled Carbon Nanotubes

Molecular dynamics simulation studies of mechanical properties of different carbon nanotube systems

Torsional Buckling of Multi-Walled Carbon Nanotubes under Combined Axial and Radial Loadings

The Intrinsic Stiffness of Single-Wall Carbon Nanotubes

Study on Collapse Controlling of Single-Wall Carbon Nanotubes by Helium Storage

A molecular mechanics approach for analyzing tensile nonlinear deformation behavior of single-walled carbon nanotubes

Characterization of Single-Walled Carbon Nanotubes with Nodal Structural Defects

A Finite-Deformation Shell Theory for Carbon Nanotubes Based on the Interatomic Potential-Part I: Basic Theory

Effects of Radius and Orientation of Single-Walled Carbon Nanotubes on Their Nonlinear Tensile Deformation Behaviour

Interfacial Thermal Conductance of Buckling Carbon Nanotubes