Abstract:This paper deals with a case study for the piezoelectric materials suddenly exposed to an environmental medium of different temperature. The problem is idealized to a plate containing an edge crack or an embedded crack. The stress and electric displacement histories in an uncracked plate are calculated. These stresses and electric displacements are then added to the crack surface tractions and electric displacements with opposite sign to formulate a mixed boundary value problem. The cracking problem is thus reduced to a singular integral equation of Cauchy type, which is then solved numerically. Both impermeable crack assumption and permeable crack assumption are considered. The results for stress and electric displacement intensity factors are computed as a function of normalized time and crack size. Lower bound solutions are obtained for the maximum thermal shock that the material can sustain Without catastrophic failure according to the two distinct criteria: (i) The maximum local tensile stress equals the tensile strength of the medium. (ii) The maximum stress intensity factor for the pre-existing representative crack equals the fracture toughness of the medium. The parameters that control the transient thermal stress and electric displacement are also identified. The method can be used to explore susceptibility to thermal fracture in piezoelectric materials containing pre-cracks.

An Elliptical Crack in a Thermopiezoelectric Solid under Uniform Temperature Gradient: Analytical Development

Theoretical Investigation of an Elliptical Crack in Thermopiezoelectric Material. Part I: Analytical Development

Theoretical investigation of an elliptical crack in thermopiezoelectric material. Part II: Crack propagation

Exact Solution to the Problem of A Half-Plane Crack in A Transversely Isotropic Piezoelectric Body Subjected to Antisymmetric Tangential Point Forces

Thermal stresses analysis of a three-dimensional crack in a thermopiezoelectric solid

A Penny-Shaped Crack in an Infinite Linear Transversely Isotropic Medium Subjected to Uniform Anti-Symmetric Heat Flux: Closed-form Solution

Green'S Function for an Electrically Permeable Crack in Thermopiezoelectric Materials

Plane Electromechanical Fieldes in a Piezoelectric Material with a Crack

A Penny-Shaped Crack in Transversely Isotropic Magneto-Electro-thermo-elastic Medium Subjected to Uniform Symmetric Heat Flux

Stress and electric displacement analyses in piezoelectric media with an elliptic hole and a small crack

Multiple cracks in thermoelectroelastic bimaterials

FRACTURE OF A PIEZOELECTRIC MATERIAL STRIP UNDER STEADY STATE THERMAL LOAD

Thermal shock fracture of piezoelectric materials

A Cracked Piezoelectric Material Strip under Transient Thermal Loading

A crack in a confocal elliptical inhomogeneity embedded in an infinite matrix subjected to uniform heat flux

Green'S Functions of an External Circular Crack in A Transversely Isotropic Piezoelectric Medium

Thermal stress around a penny-shaped crack in a thermopiezoelectric solid

Crack Growth Prediction of an Inclined Crack in a Half-Plane Thermopiezoelectric Solid

Surface Thermal Shock Fracture of a Semi-Infinite Piezoelectric Medium (poling Axis Parallel to the Crack Plane)

Isolated crack in three-dimensional piezoelectric solid. Part II: Stress intensity factors for circular crack

Exact Thermoelectroelasticity Solution for A Penny-Shaped Crack in Piezoelectric Materials