Abstract:A feasible method to fabricate glucose biosensor was developed by covalent attachment of glucose oxidase (GOx) to a gold nanoparticle monolayer modified Au electrode. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) of ferrocyanide followed and confirmed the assemble process of biosensor, and indicated that the gold nanoparticles in the biosensing interface efficiently improved the electron transfer between analyte and electrode surface. CV performed in the presence of excess glucose and artificial redox mediator, ferrocenemethanol, allowed to quantify the surface concentration of electrically wired enzyme (ΓE0) on the basis of kinetic models reported in literature. The ΓE0 on proposed electrode was high to 4.1×10−12 mol·cm−2, which was more than four times of that on electrode direct immobilization of enzyme by cystamine without intermediate layer of gold nanoparticles and 2.4 times of a saturated monolayer of GOx on electrode surface. The analytical performance of this biosensor was investigated by amperometry. The sensor provided a linear response to glucose over the concentration range of 2.0×10−5–5.7×10−3 M with a sensitivity of 8.8 μA·mM−1·cm−2 and a detection limit of 8.2 μM. The apparent Michaelis–Menten constant (Kmapp) for the sensor was found to be 4.3 mM. In addition, the sensor has good reproducibility, and can remain stable over 30 days.

Glucose Biosensor Based on Gold Nanoparticles and Enzyme Embedded in Silica Sol-gel Network

A Novel Glucose Sensor System with Au Nanoparticles Based on Microdialysis and Coenzymes for Continuous Glucose Monitoring

Glucose Biosensor Based on a Platinum Electrode Modified with Rhodium Nanoparticles and with Glucose Oxidase Immobilized on Gold Nanoparticles

Electrochemical Behavior of Glucose on Gold Nanoparticles Modified Glucose Oxidase Electrode

Glucose biosensor based on immobilization of glucose oxidase on silica nanoparticles modified Au electrode

Immobilization of glucose oxidase on gold nanoparticles modified Au electrode for the construction of biosensor

Gold Nanoparticles-Mesoporous Silica Composite Used As an Enzyme Immobilization Matrix for Amperometric Glucose Biosensor Construction

Glucose Biosensor Based on Self-Assembled Gold Nanoparticles and Double-Layer 2D-Network (3-Mercaptopropyl)-trimethoxysilane Polymer Onto Gold Substrate

Covalent attachment of glucose oxidase to an Au electrode modified with gold nanoparticles for use as glucose biosensor.

Glucose Biosensor Based on Gold Nanoparticle-Catalyzed Luminol Electrochemiluminescence on a Three-Dimensional Sol–gel Network

Glucose Based on Self-Assembling Gold Nanoparticles and MPS Sol-Gel

Glucose Biosensor Based on Electrodeposition of Platinum Nanoparticles Onto Carbon Nanotubes and Immobilizing Enzyme with Chitosan-Sio2 Sol-Gel

Biosensor based on glucose oxidase-nanoporous gold co-catalysis for glucose detection

A facile gold nanoparticles embeded hydrogel for non-enzymatic sensing of glucose

Nonenzymatic glucose sensor based on a glassy carbon electrode modified with chains of platinum hollow nanoparticles and porous gold nanoparticles in a chitosan membrane

A Novel Glucose Biosensor Based On Immobilization Of Glucose Oxidase In Chitosan On A Glassy Carbon Electrode Modified With Gold-Platinum Alloy Nanoparticles/Multiwall Carbon Nanotubes

A Glucose Biosensor Based on Chitosan–glucose Oxidase–gold Nanoparticles Biocomposite Formed by One-Step Electrodeposition

Glucose Biosensor Based on the Fabrication of Glucose Oxidase in the Bio‐Inspired Polydopamine‐Gold Nanoparticle Composite Film

Glucose Biosensor Based on the Highly Efficient Immobilization of Glucose Oxidase on Prussian Blue-Gold Nanocomposite Films

Glucose Biosensor Based on Chitosan-Nano Gold/Nano-Prussian Blue/L-Cysteine Modified Gold Electrode

Carbon Nanotube/chitosan/gold Nanoparticles-Based Glucose Biosensor Prepared by a Layer-by-layer Technique