Abstract:Abstract Pressure vessel components subject to high temperature and pressure are susceptible to life-limiting creep and/or creep-induced failure. Traditional continuum damage mechanics (CDM) based creep-damage model are used extensively for the prediction and design against creep in these components. Conventional creep experiments show considerable uncertainty in the creep response of materials where scatter can span decades of creep life. The objective of this paper is to introduce the probabilistic methods into a deterministic creep-damage model in order to predict experimental uncertainty. In this study, a modified Wilshire model capable of creep deformation, damage, and rupture prediction is selected. Creep deformation data for 304 stainless steel is collected from the literature consisting of quintuplicate (five) tests at 600°C with varying stress levels. It is hypothesized that the scatter in creep data is due to: test condition (temperature fluctuations and eccentric loading), initial damage (pre-existing surface and sub-surface defects), and metallurgical (local variation in microstructure) uncertainties. Probability distribution functions (pdfs) and Monte Carlo simulations are applied to introduce the uncertainties into the modified Wilshire equations. The domain of each source of uncertainty must be defined. A systematic calibration approach is followed where the material constant for each creep curve (in the quintuple) are obtained and statistical analysis is performed on the material properties to assess the random distribution associated with each uncertain material parameter. The probabilistic calibration begins with the introduction of test condition randomness (±2°C and ±3.2% MPa of nominal temperature/stress) in accordance with the ASTM standards. Cross calibration of temperature-stress variability proceeds the approximation of initial damage uncertainty which captures the remaining scatter in the data. Deterministic calibration unveils the range of variabilities associated with the material properties. The best-fitted pdfs are assigned to each uncertain parameter and subsequently, the deterministic model is converted into a probabilistic model where reliability is a tunable factor. A large number of Monte Carlo simulation are conducted to generate probabilistic creep deformation, minimum-creep-strain-rate (MCSR), and stress-rupture (SR) predictions. It is demonstrated that the probabilistic model produces quantitatively and qualitatively good fits when compared with experimental data. Future work will be directed towards the inclusion of service condition related uncertainty (power plant, turbine blade, Gen IV nuclear reactor application) into the probabilistic framework where the uncertainties are more robust.

A Stochastic Computation Model for the Creep Damage of Furnace Tube

Assessment of prior fatigue damage and a new approach to predict remanent creep rupture of P92 steel

Machine Learning-Assisted Probabilistic Creep Life Assessment for High-Temperature Superheater Outlet Header Considering Material Uncertainty

Study on Creep Damage of Weldments of HK40 Furnace Tubes Based on Creep Damage Mechanics

A New Method of Creep Ruptures Data Extrapolation Based on the Work

A physics-based life prediction model of HP40Nb heat-resistant alloy in a coupled creep-carburisation environment

A coupled creep damage evolution model and creep life evaluation

A Robust Life Prediction Model for a Range of Materials under Creep-Fatigue Interaction Loading Conditions

Creep Behaviors Calculated by Varying Material Constants Obtained from Different Stress Regions for a Closed-End P91 Pipe

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

Microstructural Damage Mechanics-Based Model for Creep Fracture of 9%cr Steel under Prior Fatigue Loading

A Modified Strain Energy Density Exhaustion Model for Creep–fatigue Life Prediction

A Modified Microstructure-Based Creep Damage Model for Considering Prior Low Cycle Fatigue Damage Effects

Probabilistic Creep Modeling of 304 Stainless Steel Using a Modified Wilshire Creep-Damage Model

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

A Probabilistic Framework of Creep Life Assessment of Structural Components at Elevated Temperatures

Creep-fatigue Reliability Assessment for High-Temperature Components Fusing On-Line Monitoring Data and Physics-of-failure by Engineering Damage Mechanics Approach

Studies on the damage and the service life calculation model of the fumace fire bars of a heatingg fumace

Life prediction of steam generator tubing due to stress corrosion crack using Monte Carlo Simulation

Research of Welding Effect on Creep Damage of High Temperature Furnace Tubes

An entropy-based failure prediction model for the creep process