Analysis of Main Case Matching Algorithm Used in Fault Diagnosis

陈富民,吴垌沅,林志航

DOI: https://doi.org/10.3969/j.issn.1001-3695.2008.05.021

2008-01-01

Abstract:This paper analyzed the features of six main algorithms of case matching used in CBR.To compare their effectiveness,applied the six algorithms for two instances and the grey relational analysis algorithm could distinguish the different cases evidently.

What problem does this paper attempt to address?

Research and implementation of a multi-fault diagnosis method based on case-based reasoning

Lu Yang,Gan Zhihua,Chai Xiuli

DOI: https://doi.org/10.1109/WCICA.2010.5554770

2010-01-01

Intelligent Control and Automation

Abstract:In this paper, a multiple fault diagnosis method based on case-based reasoning (CBR) is presented. And the characteristics of multiple fault modes are studied, then the case knowledge library is established for multiple faults, finally a two-step case retrieval strategy is proposed. The candidate case generation method based on the membership weights is employed to initially retrieve, which can reduce the number of candidate cases efficiently. Then, through calculating the case similarity using the grey relational analysis, the most probable fault case is obtained. It can avoids the problem of time-consuming computation resulting from the combination explosion of multiple faults. Finally, an example is applied to illustrate the proposed scheme, the results mean that the above method is effective, and it can be adopted in the actual industrial production.
On Fault Diagnosis of Rolling Bearing Based on Grey Relevancy Theory

DONG Li-li,LIANG Lin-quan,ZHOU Zhong-qiang,HUANG Dao

2008-01-01

Abstract:A fault diagnosis method is proposed based on grey relevancy theory to deal with the complicated grey characteristics and uncertainty problems of the running rolling bearing.The grey relevancy theory has advantages of simplified computation and more capability of dealing with the problems with uncertainty,small samples and lack of information.The grey relevancy theory,the relationship between the grey relational coefficient and the distinguishing coefficient,and the property and the selection theory of the distinguishing coefficient are studied.The grey relevancy theory is applied to the fault diagnosis problems of rolling bearing.Results of the practical application show that the fault diagnosis method based on grey relevancy analysis has the advantages of simplified computation,consistency to the quality analysis result,convenient for form knowledge base rules,and no special requirements for the quantity and distribution of samples,furthermore,it also provide theoretical guidance for the practical engineering or maintenance of the equipment.
Intelligent Fault Diagnosis of CNC Machine Tools Based on Rough Set Theory

Yong He

2008-01-01

Abstract:An intelligent fault diagnostic method based on data mining was presented to satisfy the development requirements of computer numerical control(CNC) machine tools' intelligence.The framework of intelligent fault diagnosis unit was established consisting of characteristic signal acquisition,diagnosis rule extraction and fault reasoning mechanism.The approach of diagnosis rule extraction was studied and an algorithm for acquisition of decision rules was proposed.The algorithm simplified the analysis procedure of core properties and unnecessary properties by using the characteristics of decision-making system and calculated reduction set by backward tracking approach.The algorithm reduced the complexity in reduction set calculation and improved the efficiency of rule extraction.A fault identification mechanism using evidence theory was presented to process fault data collected by various sensors and exactly match them with diagnosis rules.Case study justified the validity of the method.
Algorithms Comparation Of Feature Extraction And Multi-Class Classification For Fault Diagnosis Of Analog Circuit

An-Na Wang,Jun-Fang Liu,Wen-Jing Yuan,Hua Li

DOI: https://doi.org/10.1109/ICWAPR.2007.4420734

2007-01-01

Abstract:For the novelties or anomalies of faulty signals occur in a damage circuit and fault signals vary with different circuit damages. To ensure the accuracy, and reliability of diagnosis, it is very important to extract the characteristic features of fault signals. Two feature extraction methods based on wavelet packet transform is proposed to treat transient signals: optimal wavelet packet transform (OWPT) and incomplete wavelet packet transform (IWPT). For the fault signals decomposed, the energy in each frequency band may be heightened or be reduced, so a novel 'energy-fault' method is put forward to extract fault features. The problem of fault diagnosis of analog circuit is actually a pattern recognition problem. Nowadays, the binary free support v;ector machines (BTSVMs) is usually used for multi-class classification, but the structure of the binary tree is closely related to the classification performance of binary tree support vector machines (BTSVMs). A new separability measure method based on the space distribution of pattern classes is applied to construct different binary trees. Three BTSVMs classifiers based on the separability measure are defined in this paper: inclined binary tree Support vector machines (IBTSVMs), balanced binary tree support vector machines (BBTSVMs) and adaptive binary tree support vector machines (ABTSVMs). Simulation results show us that the OWPT method is prefect for soft fault diagnosis, the IWPT for hard fault diagnosis, and the BBTSVMs multi-classifier possesses better classification speed, the ABTSVMs multi-classifer better classification accuracy.
Research on Multiple Faults Diagnosis Method Based on Case Reasoning

路杨,甘志华,王剑斐

DOI: https://doi.org/10.3969/j.issn.1001-3695.2009.11.047

2009-01-01

Abstract:After analyzing the characteristics of multiple failure modes,established the case knowledge database for the multiple fault,and proposed a multiple faults diagnosis method based on the two-step case retrieval strategy.Employed the weight membership to generate the initial candidate cases,which reduced the number of candidate cases greatly.Subsequently,obtained the most probable fault case through the calculation of case similarity with the grey relational analysis,which avoided the problem of time-consuming computation resulting from the combination explosion of multiple faults.Finally,embedded an example in the description of the methodology for better understanding.
Fault Diagnosis Method for Rotating Machinery Based on Improved CBR

Xing Xie,Zichun Yang,Lei Zhang,Jintao Wang,Guoqing Zeng,Xuefeng Wang,Guobing Chen

DOI: https://doi.org/10.1088/1742-6596/2528/1/012030

2023-01-01

Journal of Physics Conference Series

Abstract:A novel method to detect the faults of rotating machinery using improved case-based reasoning is proposed in this article, which can fully utilize the experience and intelligence of previous cases to realize an intelligent diagnosis. Especially, the identification process of a new fault state is designed to address the problem that the state not included in the case base cannot be automatically recognized. The presented approach is performed to test the gear and bearing datasets. And good diagnosis results are achieved, which verifies the effectiveness of the presented approach.
Research on rapid diagnosis algorithm for complex system based on Bayesian theory

ZHANG Dawei,WU Shijing,LUO Xiaohua,REN Hui

2011-01-01

Abstract:According to the characteristics of complex system,which are complex structure,very difficult to maintain and support,uncertain and incomplete information,multiple faults and coherent faults,fused of Bayesian theory and strategy optimization algorithm,a hybrid rapid fault diagnosis method is put forward.In this method,system fault diagnosis task is divided into several single-fault subtasks;and the fault model is established respectively based on fault tree and Bayesian network;the prior probability is got based on Bayesian-Monte Carlo algorithm in every subtask;so the weak link of the system fault is got by diagnostic analysis.At the same time,the multi-strategy optimization algorithm is used to optimize the fault reason and achieve the purpose of rapid fault diagnosis.Finally,an example is given to prove the correctness and effectiveness of this method.
Fault Diagnosis of Rail Turnout System Based on Case-Based Reasoning with Compound Distance Methods

Hui Zhao,Hua Chen,Wei Dong,Xinya Sun,Yindong Ji

DOI: https://doi.org/10.1109/ccdc.2017.7979237

2017-01-01

Abstract:With the rapid development of the high-speed railway, the safety and reliability problem of the railway bring more rigid requirement to the high-speed railway industry. This paper focuses on the diagnosis problem of railway turnout system, which is the most important infrastructure elements of the rail system. According to the characteristics of the turnout mechanism and in order to improve the diagnosis performance, CBR method with compound distance metrics is proposed. First, different distance metrics (Euclidean metric, dynamic time warping metric) are calculated in the CBR to get the single result; then a group decision making strategy is adopted to combine the two metrics to get the final result. The experimental results indicate that the proposed method achieves a better performance, which prove that the proposed could improve the diagnosis performance, and guarantee the operation safety of high-speed rail way.
Fault diagnosis based on dynamic time warping and classification of adaptive rank-order morphological transform

Han Li,Deyun Xiao

DOI: https://doi.org/10.3772/j.issn.1002-0470.2013.07.011

2013-01-01

Abstract:The techniques of applying dynamic time warping (DTW) to fault diagnosis were studied to raise DTW's important role in sequence matching by minimizing the distance between two sequences which display the same trends but do not perfectly align with each other. Based on the fault diagnosis method proposed in the earlier stage of the study that uses the classification of adaptive rank-order morphological transform and the Euclidean distance for measuring the matching degree between two sequences, the DTW matching was substituted for the Euclidean distance metric to measure the matching degree, and three new classification approaches for fault diagnosis were presented. The effectiveness of the three methods in diagnosis of faults was verified by the test of a continous stirred tank heater, and their performances were compared with that of method proposed in the earlier study.
An Algorithm for Fault Diagnosis Based on Combinatorial Design Approach for Testing

Nie Changhai,Xu Baowen,Shi Liang

DOI: https://doi.org/10.1007/bf02687709

2003-01-01

Abstract:Much research has been done mainly in testcase generation and its effect for combinatorial design approach for testing. This letter presents an algorithm for fault diagnosis based on the approach. It can conclude that the factors, which cause errors, must be in a very small range through analyzing the test cases after testing, and retesting with some complementary test cases. The algorithm can provide a very efficient and valuable guidance for the debugging and testing of software.
A Similarity Measure Based on Extension Distance and Its Application in CBR

Yanwei Zhao,Feng Zhang,Nan Su,Huijun Tang,Jian Chen

DOI: https://doi.org/10.1115/imece2008-68235

2009-01-01

Abstract:Case-based reasoning (CBR) is an effective method that integrates reasoning methodology and represents related knowledge in a domain. The success of a CBR system largely depends on case retrieval, and the similarity and determination of weight for each case features have a significant influence on the efficiency and accuracy of case retrieval. The aim of the research is to improve the efficiency and accuracy of case retrieval. Analyzing the deficiency of similarity measures based on the classical distance, different similarity measures are proposed for different kinds of attribute values based on the extension distance, especially the similarity model between numerical and set considered the customer’s preference. The standard deviation related with the similarity is introduced to distribute the dynamic attribute’s weights which also considered the customer’s interest, but not the traditional methods that the weight is a constant if determined. The presented methods will enable the system to retrieve the more similar case correctly so that reducing case adaptation. In this study, an electric drill is used as a case to verify the usefulness and effectiveness of the similarity measurements and weight assignments. It is demonstrated that this method is more beneficial to case retrieval compared with other methods.
Fault Subspace Selection and Analysis of Relative Changes Based Reconstruction Modeling for Multi-Fault Diagnosis

Chunhui Zhao

DOI: https://doi.org/10.1109/ccdc.2014.6852151

2014-01-01

Abstract:Online fault diagnosis has been a crucial task for industrial processes. Reconstruction-based fault diagnosis has been drawing special attentions as a good alternative to the traditional contribution plot. It identifies the fault cause by finding the specific fault subspace that can well eliminate alarming signals from a bunch of alternatives that have been prepared based on historical fault data. However, in practice, the abnormality may result from the joint effects of multiple faults, which thus can not be well corrected by single fault subspace archived in the historical fault library. In the present work, an aggregative reconstruction-based fault diagnosis strategy is proposed to handle the case where multiple fault causes jointly contribute to the abnormal process behaviors. First, fault subspaces are extracted based on historical fault data in two different monitoring subspaces where analysis of relative changes is taken to enclose the major fault effects that are responsible for different alarming monitoring statistics. Then, a fault subspace selection strategy is developed to analyze the combinatorial fault nature which will sort and select the informative fault subspaces that are most likely to be responsible for the concerned abnormalities. Finally, an aggregative fault subspace is calculated by combining the selected fault subspaces which represents the joint effects from multiple faults and works as the final reconstruction model for online fault diagnosis. Theoretical support is framed and the related statistical characteristics are analyzed. Its feasibility and performance are illustrated with simulated multi-faults using data from the Tennessee Eastman (TE) benchmark process.
Fault Subspace Selection Approach Combined with Analysis of Relative Changes for Reconstruction Modeling and Multifault Diagnosis

Chunhui Zhao,Furong Gao

DOI: https://doi.org/10.1109/tcst.2015.2464331

2016-01-01

Abstract:Online fault diagnosis has been a crucial task for industrial processes, which in general is taken after some abnormalities have been detected. Reconstruction-based fault diagnosis has been drawing special attention as a good alternative to the traditional contribution plot. It identifies the fault cause by finding the specific reconstruction model (i.e., fault subspace) that can well eliminate alarm signals from a bunch of alternatives that have been prepared based on historical fault data. However, in practice, the abnormality may result from the joint effects of multiple faults, which thus cannot be well corrected by single-fault subspace archived in the historical fault library. In this paper, an aggregative reconstruction-based fault diagnosis strategy is proposed to handle the case where multiple-fault causes jointly contribute to the abnormal process behaviors. First, fault subspaces are extracted based on historical fault data in two different monitoring subspaces where analysis of relative changes is taken to enclose the major fault effects that are responsible for different alarm monitoring statistics. Then, a fault subspace selection strategy is developed to analyze the combinatorial fault nature that will sort and select the informative fault subspaces by evaluating their significances in data correction. Finally, an aggregative fault subspace is calculated by combining the selected fault subspaces, which represents the joint effects from multiple faults and works as the final reconstruction model for online fault diagnosis. Theoretical support is framed and the related statistical characteristics are analyzed. Its feasibility and performance are illustrated with simulated multiple faults from the Tennessee Eastman benchmark process.
Study on Two Key Techniques of Complex System Fault Diagnosis

马剑,吕琛,刘红梅

DOI: https://doi.org/10.3969/j.issn.1671-7449.2010.04.018

2010-01-01

Abstract:Some key technical problems have always been the bottlenecks constraining the development of complex system fault diagnosis technology. Performance degradation prediction and fault location,two of the typical and key problems,were discussed and analyzed in this paper.Research status of complex system fault diagnosis was briefly reviewed.Performance degradation prediction and fault location,together with the corresponding solution approaches,were proposed as two key techniques.Two relative study cases on fault diagnosis of complex system were presented,including a Trous wavelet recursion prediction based performance degradation prediction of small satellite power system,hierarchical radius basis function(RBF) neural network based fault location of hydraulic servo system.It was found that the proposed approaches were effective and pragmatic for the two types of systems.
Mechanical Fault Diagnosis Based on Redundant Second Generation Wavelet Packet Transform, Neighborhood Rough Set and Support Vector Machine

Ning Li,Rui Zhou,Qinghua Hu,Xiaohang Liu

DOI: https://doi.org/10.1016/j.ymssp.2011.10.016

IF: 8.4

2012-01-01

Mechanical Systems and Signal Processing

Abstract:This paper investigates the application of the redundant second generation wavelet package transform (RSGWPT), neighborhood rough set (NRS) and support vector machine (SVM) on faulty detection, attribute reduction and pattern classification. On this basis, a novel method for mechanical faulty diagnosis based on RSGWPT, NRS and SVM is presented, which utilizes the RSGWPT to extract faulty feature parameters from the statistical characteristics of wavelet package coefficients to constitute feature vectors, and then makes the attribute reduction by NRS method to obtain the key features, lastly these key features are input into SVM to accomplish faulty pattern classification. The experimental results of the proposed method to fault diagnosis of the gearbox and gasoline engine valve trains show that this method can extract the faulty features, which have better classification ability and at the same time reduce a lot of redundant features in case of assuring the classification accuracy, accordingly improve the classifier efficiency and achieve a better classification performance.
A two‐phase features extraction approach for BRB based fault diagnosis of electromechanical system

Zhenjie Zhang,Wenchao Liu,Gang Xiao,Xiaobin Xu,Meng Li,Zhenbo Cheng,Yuanming Zhang,Wenming Xu,Leilei Chang

DOI: https://doi.org/10.1002/acs.3862

IF: 3.369

2024-06-26

International Journal of Adaptive Control and Signal Processing

Abstract:Summary Belief rule base (BRB) is an effective nonlinear relationship modeling approach. It has been widely used in the fault diagnosis of electromechanical systems. To improve the performance of the BRB‐based diagnostic model, a two‐phase features extraction approach called CNPCA based on complex network (CN) and principal component analysis (PCA) is proposed in this paper. In the first phase, the weighted visibility graph method is applied to transform the time series data of monitored variables into complex networks. Then the statistical attributes of the constructed networks are extracted as the initial features. In the second phase, the PCA method is used to process the initial features and the principal component features are obtained. After that, the CNPCA‐BRB diagnostic model for the electromechanical system is constructed. The experimental results of the elevator fault diagnosis show that the constructed diagnostic model outperforms better than the classical ones. It demonstrates that the CNPCA approach can ensure the integrity of fault information in the features and improve the separability of the fault features.

automation & control systems,engineering, electrical & electronic
An intelligent index-driven multiwavelet feature extraction method for mechanical fault diagnosis

Jing Yuan,Liangjie Luo,Huiming Jiang,Qian Zhao,Bohua Zhou

DOI: https://doi.org/10.1016/j.ymssp.2022.109992

IF: 8.4

2023-04-01

Mechanical Systems and Signal Processing

Abstract:To sufficiently perform the inner product match principle of mechanical fault diagnosis, the construction and selection of the basic functions are the critical issues. Hereinto, the construction of basic functions increases the ability of accurate inner product match, but the selection determines the final matching accuracy for fault diagnosis. Thus, an intelligent index-driven multiwavelet feature extraction method is proposed for mechanical fault diagnosis, which is essentially an accurate inner product matching established by the ‘appropriate’ multiwavelet basic functions guiding by an intelligent data-driven index. First, an intelligent index by the improved weighted square envelope spectrum is designed for the data-adapted selection guidance. Hereinto, the optimal weights of purified envelope spectrum by multiwavelet neighboring coefficient denoising are searched by support vector machine. Second, a basic function library is established by two excellent families of SA4-type and Hermite lifting-based multiwavelets. Third, guiding by the maximization of the intelligent index, the optimal basic functions are selected from the candidate multiwavelet library and employed to extract the fault features. Finally, two experimental case studies of bearing degradation data verify the effectiveness and feasibility of this method with comparisons. The results show that it could extract the fault features at different stages, especially at the very initial stages, offering a useful tool for mechanical fault diagnosis.

engineering, mechanical
Single Model-Based Analysis of Relative Causal Changes for Root-Cause Diagnosis in Complex Industrial Processes

Chang Tian,Chunhui Zhao

DOI: https://doi.org/10.1021/acs.iecr.1c01506

2021-01-01

Industrial & Engineering Chemistry Research

Abstract:Traditional root-cause diagnosis methods analyze different faults independently, suffering from repetitive modeling efforts for each fault. Besides, they are disturbed by significant redundancy and interference relations, being both time and effort consuming in online applications. In this work, a novel strategy is proposed to diagnose root cause by analyzing the changes in causal effects between the normal status and fault statuses, which allows a single causal model to diagnose different faults. The enhanced cross mapping (ECM) is proposed to carry out the analysis of the causal effects, which could detect precise causality and handle interference relations in complex industrial processes. In our strategy, a causal model is constructed from coarse-grained to fine-grained via the ECM to remove interference relations and achieve a concise structure. Besides, causal intensity and direction information of normal status are comprehensively described in the model. By updating causal effects under fault statuses, the relative causal changes from normal to fault can be analyzed and the significant changes are considered responsible for the fault propagation. Consequently, the fault propagation path is highlighted from the causal model and the root cause can be identified along the path. The feasibility of the proposed strategy is demonstrated using both simulation and practical industrial case studies.
Analysis of Methods for Novel Case Selection

Neil Hurley,Mi Zhang

DOI: https://doi.org/10.1109/ICTAI.2008.32

2008-01-01

Abstract:Successful information retrieval with case-based reasoning (CBR) depends on a good similarity metric that can distinguish those cases that are most pertinent to a user's query in a potentially large case-base. Traditional CBR ranks cases according to their similarity value and returns a small number of top-ranked cases in response to the query. Since in general the retrieved cases are very well matched to the input user query, there is a high probability that they are also strongly similar to each other, and hence the range of choice offered in the retrieved list is limited. As a response to this issue, some recent research has considered methods to increase the intra-dissimilarity or diversity of the retrieved set. In this paper, we study this problem in detail. We argue that the motivation of diversity strategies is to increase the probability of retrieving unusual or novel cases and introduce a methodology that allows their performance in terms of novel case retrieval to be evaluated. Moreover, we formulate the trade-off between diversity and matching quality as a binary optimisation problem, with an input control parameter allowing explicit tuning of this trade-off. We study solution strategies to the optimisation problems and demonstrate the importance of the control parameter in obtaining desired system performance. The methods discussed are evaluated on synthetic data, based on the publicly available Travel case-based data-set.
Research on Application of Clustering Algorithm in CBM

GENG Huantong,XIAO Mingjun,ZOU Xiang,CAI Qingsheng

DOI: https://doi.org/10.3969/j.issn.1000-3428.2005.12.061

2005-01-01

Abstract:A traditional clustering algorithm is applied in case-based reasoning. This paper provides an efficient approach for case-basemaintenance. The experiments show that the approach is feasible and effective.

Analysis of Main Case Matching Algorithm Used in Fault Diagnosis

Research and implementation of a multi-fault diagnosis method based on case-based reasoning

On Fault Diagnosis of Rolling Bearing Based on Grey Relevancy Theory

Intelligent Fault Diagnosis of CNC Machine Tools Based on Rough Set Theory

Algorithms Comparation Of Feature Extraction And Multi-Class Classification For Fault Diagnosis Of Analog Circuit

Research on Multiple Faults Diagnosis Method Based on Case Reasoning

Fault Diagnosis Method for Rotating Machinery Based on Improved CBR

Research on rapid diagnosis algorithm for complex system based on Bayesian theory

Fault Diagnosis of Rail Turnout System Based on Case-Based Reasoning with Compound Distance Methods

Fault diagnosis based on dynamic time warping and classification of adaptive rank-order morphological transform

An Algorithm for Fault Diagnosis Based on Combinatorial Design Approach for Testing

A Similarity Measure Based on Extension Distance and Its Application in CBR

Fault Subspace Selection and Analysis of Relative Changes Based Reconstruction Modeling for Multi-Fault Diagnosis

Fault Subspace Selection Approach Combined with Analysis of Relative Changes for Reconstruction Modeling and Multifault Diagnosis

Study on Two Key Techniques of Complex System Fault Diagnosis

Mechanical Fault Diagnosis Based on Redundant Second Generation Wavelet Packet Transform, Neighborhood Rough Set and Support Vector Machine

A two‐phase features extraction approach for BRB based fault diagnosis of electromechanical system

An intelligent index-driven multiwavelet feature extraction method for mechanical fault diagnosis

Single Model-Based Analysis of Relative Causal Changes for Root-Cause Diagnosis in Complex Industrial Processes

Analysis of Methods for Novel Case Selection

Research on Application of Clustering Algorithm in CBM