Abstract:In this paper, the competing requirements of material strength, casting formation and residual stress are considered in the design of a large bulkhead integral isothermal forging die using a design approach that incorporates an outer ring plus a die body. Thermal stress assembly was conducted to resolve the various manufacturing issues encountered in the production of this large-scale casting. This paper also proposes a design method for an expansion joint and material-saving holes to homogenize the cross-sectional thickness of the casting die by solving problems associated with defects and hot cracking during the casting process. The finite element method was used based on the equivalent liquid level descending method, the Niyama criterion, etc., to analyze the pouring of the sand model with different risers to choose the casting process. To resolve the occurrence of hot cracks during production, the design was optimized and the process was improved in combining with the simulation analysis result, after which carrying out another finite element analysis and by re-verifying the production process again. The results show that the simulated porosity, shrinkage and stress distribution are in accord with the practical production status. Based on the mechanical properties and a microstructure analysis, the tension strength of the K3 casting die at 950 °C is approximately 635 MPa, and the microstructures are typical dendrites. However, through the simulation, practical production, and analysis of the mechanical properties and microstructure, the die design method proposed in this paper offers benefits in solving casting forming problems and hot cracking of an integral oversized titanium bulkhead casting die, and a K3 superalloy die with a weight of 7.8 tons was successfully cast.

Reverse Deformation Methodology of Investment Casting Die Based on Simulation File of ProCAST

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Die Structure Optimization of Aluminum Alloy Wheel Low-Pressure Die Casting Based on CAE

Iterative reverse deformation optimization design of castings based on numerical simulation of solidification thermal stress

Research and Application of Foundry CAD/CAE System

Extraction of Deformation of Castings from Simulated Displacement Results

Integrated Simulation of Castings Deformation during Casting and Heat Treatment Processes

Study on deformation of large-scale hydraulic turbine blade during the casting process

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Numerical Simulation of Solidification Process for Impeller Investment Casting Based on ProCAST

Numerical Simulation and Optimization of Indirect Squeeze Casting Process

Die-Casting Die Design Based on the Application of Cae Simulation

Numerical Simulation on Strain and Stress in U-shaped Castings and Study on Reversible Deformation

Study and Application of Cae Simulation in Die-Casting Die Design

Simulation Study on the Investment Casting Process of a Low-Cost Titanium Alloy Gearbox based on ProCAST

Numerical Simulation of Deformation in Large Scale Hydroturbine Blade Casting

Numerical Simulation of Investment Casting of Large Complicated Hollow Blade by ProCAST

Numerical Simulation Research on the Deformation and Solidification of Corrosion Protection Shell Casting

Casting Design Optimization Using Numerical Simulation of Precision Forging Die for Large Titanium Alloy Integral Bulkhead

Study on a CAD/CAE system of die casting