Abstract:In this work, a nanoporous array anodic titanium was selected as a fiber substrate because of its high surface-to-volume ratio, easy preparation, mechanical stability, and rich titanol groups on its surface that can anchor other active groups. Then, a polymerizable ionic liquid monomer pair, (1-vinyl-3-hexadecylimidzolium)-(p-styrenesulfonate) ([C(16)VIm]+SS-), was synthesized and used for the chemical modification of the mercaptopropyl-functionalized nanoporous anodic titania support using a surface radical chain-transfer addition. A homogeneous and porous coating with a thickness of about 7 mu m was achieved. The main advantage of this copolymerization method over the conventional single-ion polymerization is its high stability under harsh conditions, like high temperatures, as well as acidic, alkaline and high ionic strength solutions. Combined with gas chromatography-a flame ionization detection (GC-FID), the poly[C(16)VIm]+SS- was used as a sorbent material for the direct immersion SPME of four types of compounds, including polycyclic aromatic hydrocarbons, hydrophobic phenols, nonvolatile phthalate esters and parabens, in an aqueous solution. The analytical performance of the proposed method was investigated under the optimum extraction conditions (content of NaCl, 20% (w/v); extraction temperature, 70 degrees C; and extraction time, 55 min). Calibration ranges were 0.1-400 mu g L-1 for four hydrophobic phenols, anthracene (Ant) and fluoranthene (Flt), 0.15-600 mu g L-1 for dibutyl phthalate (DBP) and di-(2-ethyl-hexyl) phthalate (DEHP), and 0.5-2000 mu g L-1 for ethylparaben (EPN) and propylparaben (PPN). The as-established method showed good linearity with good correlation coefficients (R = 0.993-0.999) and low detection limits in the range of 0.003 to 0.156 ng mL(-1) (S/N = 3). In addition, the poly[C(16)VIm]+SS- -SPME fiber showed good precision (3.2-13.5%) and repeatability between fiber and fiber (9.1-19.6%). Finally, soil extract sample were analyzed and satisfactory results were obtained.

A novel TiO2 nanotube array/Ti wire incorporated solid-phase microextraction fiber with high strength, efficiency and selectivity.

Electrochemical In Situ Fabrication of Titanium Dioxide Nanotubes on a Titanium Wire as a Fiber Coating for Solid-Phase Microextraction of Polycyclic Aromatic Hydrocarbons

Development of Octadecyl-Functionalized-Nanotubular Tio2/Ti Wire Solid-Phase Microextraction Fiber

In Situ Hydrothermally Grown Tio2@C Core-Shell Nanowire Coating for Highly Sensitive Solid Phase Microextraction of Polycyclic Aromatic Hydrocarbons

Cnt-Tio2 Coating Bonded Onto Stainless Steel Wire As A Novel Solid-Phase Microextraction Fiber

Temperature and Time-Controlled Hydrothermal Growth and Sorption Selectivity of Titania Nanowires on Titanium Fiber for Highly Efficient Solid-Phase Microextraction.

Gold nanoparticle modified NiTi composite nanosheet coating for efficient and selective solid phase microextraction of polycyclic aromatic hydrocarbons

Preparation of Nanoporous Array Anodic Titanium Wire Supported Solid-Phase Microextraction Fiber Coated with A Copolymerized Polymerizable Ionic Liquid Monomer Pair

Tailoring the Selectivity of Titania Nanowire Arrays Grown on Titanium Fibers by Self-Assembled Modification of Trichlorophenylsilane for Solid-Phase Microextraction of Polycyclic Aromatic Hydrocarbons

Preparation Of Solid-Phase Microextraction Fiber Coated With Single-Walled Carbon Nanotubes By Electrophoretic Deposition And Its Application In Extracting Phenols From Aqueous Samples

A solid-phase microextraction fiber with carbon nanoparticles as sorbent material prepared by a simple flame-based preparation process

Development of a novel porous cobalt, phosphorus and nitrogen co-doped carbonaceous coating by phosphiding ZIF-67 grown on nitinol fiber for selective solid-phase microextraction of polycyclic aromatic hydrocarbons from water samples

Microextraction of Polycyclic Aromatic Hydrocarbons by Using a Stainless Steel Fiber Coated with Nanoparticles Made from a Porous Aromatic Framework.

Coating of porous graphitic carbon nitride modified with titanium dioxide (OH-g-C3N4/TiO2) on Ag wire as an SPME fiber for extraction of lead

Nano-Moo3 for Highly Selective Enrichment of Polycyclic Aromatic Hydrocarbons in In-Tube Solid-Phase Microextraction

Derivation of Carbonaceous Nanoparticles from Glucose-Modified Nickel-Titanium Oxide Nanoparticles Grown on Nitinol Fiber for Solid Phase Microextraction of Several Polycyclic Aromatic Hydrocarbons in Water Samples

Development of a Highly Robust Solid Phase Microextraction Fiber Based on Crosslinked Methyl Methacrylate–polyhedral Oligomeric Silsesquioxane Hybrid Polymeric Coating

Solid-phase microextraction of phthalate esters from aqueous media by electrophoretically deposited TiO₂ nanoparticles on a stainless steel fiber

Graphitic Carbon Nitride Derivative with Large Mesopores As Sorbent for Solid-Phase Microextraction of Polycyclic Aromatic Hydrocarbons.

Mesoporous TiO2 Nanoparticles for Highly Sensitive Solid-Phase Microextraction of Organochlorine Pesticides

Modulating the selectivity of solid-phase microextraction fibers based on morphological, compositional, and size-depended control of bimetallic oxide nanostructures grown on nickel-titanium alloy substrates