Abstract:Signal to noise ratios (SNR) in magnetic resonance microscopy images are limited by acquisition times and the decreasing number of spins in smaller voxels. Significant SNR gains from cooling of the RF receiver are only realized when the Johnson noise generated within the RF hardware is large compared to the electromagnetic noise produced by the sample. Cryogenic cooling of imaging probes is common in high field systems but proves difficult to insulate the sample from extreme temperatures. We designed a chamber to cool only the tune and match circuitry to show it is possible to achieve much of the available SNR gain available for cooled coils. We designed a microcoil circuit to resonate at 650 MHz for imaging on a 15.2 T scanner. Surface loops and solenoids of varying diameters were tested to determine the largest diameter coil that demonstrated significant SNR gains from cooling. A liquid N2 cryochamber was designed to cool the circuitry while leaving the RF coil in ambient air. As the cryochamber was filled with liquid N2, Q-factors were measured on the bench while monitoring the coil's surface temperature. Improvements of SNR on images of solutions were demonstrated via cooling the tune and match circuit in the magnet bore. At 650 MHz, loops and solenoids < 3 mm in diameter showed significant improvements in quality factor on the bench. The resistance of the variable capacitors and the coaxial cable were measured to be 45% and 32% of room temperature values near the Larmor frequency. Images obtained with a 2 turn, 3 mm diameter loop with the matching circuit at room temperature and then cooled with liquid nitrogen demonstrated SNR improvements of a factor of 2. By cooling the tune and match circuit and leaving the surface loop in ambient air, SNR was improved by a factor of 2. The results are significant because it allows for more space to insulate the sample from extreme temperatures.

Nuclear Demagnetization Cryostat at University of Florida Microkelvin Laboratory

Magnetic cooling for microkelvin nanoelectronics on a cryofree platform

Dry demagnetization cryostat for sub-millikelvin helium experiments: refrigeration and thermometry

Aluminum nuclear demagnetization refrigerator for powerful continuous cooling

A microkelvin cryogen-free experimental platform with integrated noise thermometry

A Cryogen Recondensing Cooling System for Scientific Experiment in the Pulsed High Magnetic Field

On-chip Thermometry for Microwave Optomechanics Implemented in a Nuclear Demagnetization Cryostat

Cryogen-free one hundred microkelvin refrigerator

Versatile Millikelvin Hybrid Cooling Platform for Superconductivity Research

A Cryogen-Free Cryostat for Scientific Experiment in Pulsed High Magnetic Fields

A Portable Miniature Cryogenic Environment for in Situ Neutron Diffraction

A Closed-Cycle Miniature Dilution Refrigerator for a Fast-Cooldown 100 mK Detector Wafer Test Cryostat

Ultrahigh Vacuum Cryostat System for Extended Low-Temperature Space Environment Testing

Variable Temperature Thermal Conductivity and Conductance Measurements Using a Gifford-McMahon Cryocooler

A Cryogenic Tune and Match Circuit for Magnetic Resonance Microscopy at 15.2T

Developing compact tuning fork thermometers for sub-mK temperatures and high magnetic fields

A small scale remote cooling system for a superconducting cyclotron magnet

Cryogen free spin polarized scanning tunneling microscopy and magnetic exchange force microscopy with extremely low noise

A dilution refrigerator combining low base temperature, high cooling power and low heat leak for use with nuclear cooling

A Cryostat Applicable to Long-Wavelength Light-Driven Scanning Probe Microscopy.