Performance analysis and multi-objective optimization of a novel poly-generation system integrating SOFC/GT with SCO2/HDH/ERC
Caihao Liu,Jitian Han,Wenxing Liang,Yi Ge,Wanchao Zhu,Jinwen Yang,Chaoyang Mou,Wan Lv
DOI: https://doi.org/10.1016/j.applthermaleng.2023.122075
IF: 6.4
2024-02-01
Applied Thermal Engineering
Abstract:The SOFC-based poly-generation system is an effective and environmental-friendly technology. To further improve energy efficiency of poly-generation system, a novel poly-generation system is developed based on solid oxide fuel cell/gas turbine (SOFC/GT) as the prime mover and supercritical carbon dioxide (SCO2) Brayton cycle, humidification and dehumidification (HDH) desalination and ejector refrigeration cycle (ERC) as the waste heat recovery units to produce power, cooling and freshwater. In the proposed system, a novel configuration of combining the SCO2 cycle with HDH is applied to recover the waste heat of SOFC/GT hybrid system. A mathematical model is developed to explore the system performances from the energy, exergy and economic perspectives. The effects of key parameters such as fuel flowrate, fuel utilization factor, SOFC operating pressure and temperature, and desalination top temperature on system performances are investigated. Multi-objectives optimization is conducted to obtain the optimal design parameters of the poly-generation system. The results show that the system net power output, cooling capacity and freshwater production are 273.769 kW, 12.997 kW and 24.23 g/s with the total cost being 14.01 $/h under the given condition, respectively. The electrical and exergy efficiencies and total gained output ratio of the system are 68.35 %, 67.23 % and 85.25 %, respectively. The parametric analysis indicates that an appropriate increase in fuel flowrate, fuel utilization factor and SOFC operating pressure and temperature can improve the electrical and exergy efficiency. The optimization results demonstrate that the system exergy efficiency and total cost are 67.48 % and 13.94 $/h.
energy & fuels,engineering, mechanical,thermodynamics,mechanics