Abstract:As a promising green technology, Integrated Gasification Combined Cycle (IGCC) plant is more efficient and low-pollution electricity generation choice than conventional thermal power plants. Its process is mainly consist of the gasifier, the air separation unit and the combined cycle unit. Going through those key blocks, the fuel, such as coal and biomass, could be converted to syngas and further combusted for power generation. In order to be a viable technology, the bottleneck is located on the high energy production cost, which could be overcame by improving the plant efficiency through process optimisation and Integration. The opportunity and challenge are given by the complicated configuration and extreme operation conditions, which also demands a flexible and robust IGCC plant simulation to complete deep process analysis. In this work, a novel simplified IGCC mathematical model is proposed considering thermodynamics constraints with energy and mass conservation. The gasification is simulated based on the principle of Gibbs free energy minimisation, which holds the good feature of avoiding potential bi-level optimisation problem. The proposed gasification model results in syngas composition similar to the experimental data provided in literature. Meanwhile, the cryogenic air separation unit is selected with the double distillation column configuration, which is simulated considering the novel simplification of thermal coupled distillation columns. What is more, the combined cycle unit is simulated with isentropic assumption plus efficiency to complete the process. To validate the novel simplified IGCC model, one base case is built and compared with literature data. Another highlight of this work is the simultaneous optimisation and integration methodology instead of conventional sequential one, which gives more guarantee for achieving global optimal solution. If the ideal property assumptions are occupied, a graphical approach could be generated for the simultaneous optimization and integration of IGCC plant. The best material and energy integration scheme in proper operation condition could be selected considered with respect to the overall thermal efficiency of the IGCC plant. The good performance is shown by about 10 % power increment compared with the base case in the case study.

Thermodynamic Analysis And Optimization For An Igcc Power Plant

Energy and exergy co optimization of IGCC with lower emissions based on fuzzy supervisory predictive control

Simulation and Optimization of Ion Transfer Membrane Air Separation Unit in an IGCC Power Plant

Study on Thermodynamic Characteristic and Optimization of Steam Cycle System in Igcc

Advanced design, parameter optimization, and thermodynamic analysis of integrated air-blown IGCC power plants

Option of IGCC system's key components and their influence on the power plant's overall performance (II): The HRSG

Process modelling and optimization of a 250 MW IGCC system: ASU optimization and thermodynamic analysis

Option of IGCC system's key components and their influence on the power plant's overall performance (I): the gasifier

Study on optimization design of conventional island system in IGCC

Simultaneous Optimisation and Integration of Igcc Plant Using Graphical Method

Simultaneous Optimization and Integration of Gas Turbine and Air Separation Unit in IGCC Plant

Study on IGCC System Characteristic with Off-Design Gas Turbine

Influence of off-design gas turbine on performance of gasification island in IGCC system

Modeling and Dynamic Analysis of IGCC System for Varied Gasification Inputs

Process modelling and optimization of a 250 MW IGCC system: Model setup, validation, and preliminary predictions

Option of IGCC System's Key Components and Their Influence on the Power Plant's Overal Performance(Ⅱ):The HRSG

Thermodynamic and Economic Analysis of Oxy-Fuel-Integrated Coal Partial Gasification Combined Cycle

Simulation of Integrated Gasification Combined Cycle (IGCC) and Performance Analysis

PERFORMANCE ANALYSIS OF THE POWER GENERATING SYSTEM WITH ICGCC

Simulation Study on the Gasification Island in Integrated Gasification Combined Cycle System

Influences of Syngas Pretreatment on the Performance and Energy Distribution in an IGCC Power Plant