Abstract:Phosphate is a minor but important constituent of iron ores and is especially undesirable in the production of steel where it is considered a penalty element and is therefore tightly controlled. Iron ore quality must be determined at source, which means that deleterious elements must be accurately determined as an ongoing process. This demands fast, reliable analytical methods for the determination of, amongst others, phosphorus. However, such analysis is severely hampered by the following factors: the standard analytical method employed is X-ray fluorescence (XRF), but the measurements for phosphorus are seriously affected by matrix and inter-element interferences. An alternative technique is inductively coupled plasma with optical emission spectroscopy (ICP-OES), but there are also complications in using ICP-OES. The abundance of phosphorus in rocks is very low, generally under 0.5% wt. ICP-OES is also very insensitive to phosphorus and therefore must use the most sensitive spectral lines for quantification, and, there are serious spectral interferences on these lines by Fe and Cu. This study examines several analytical approaches for the determination of phosphate, using preparation by fusion and analysis by ICP-OES, demonstrating that suitable mathematical procedures and software applications can produce good results for phosphates, comparable to inter-laboratory tests or XRF.

Determination of Trace Toxic Elements of Lead, Arsenic and Cadmium in Phosphate Ores by Inductively Coupled Plasma-Atomic Emission Spectrometry

The Determination of Fe,Cu,As,Zn,Cd,Hg in Pb-Zn Ore with ICP-AES Method

Determination of Trace Amounts of Lead, Arsenic, Nickel and Cobalt in High-Purity Iron Oxide Pigment by Inductively Coupled Plasma Atomic Emission Spectrometry after Iron Matrix Removal with Extractant-Contained Resin.

Determination of Ni,Al,P,Mg and Ca in Nickel Ores by Inductively Coupled Plasma-Atomic Emission Spectrometry

Determination of Lead in Phosphate Ore by Flame Atomic Absorption Spectrometry with Microwave Digestion

FI-FAAS Determination of Trace Amounts of Lead with On-line Enrichment by Phosphate Precipitation

Simultaneous Determination of Arsenic, Antimony and Bismuth in Chemical Materials by Inductively Coupled Plasma Optical Emission Spectrometry

Simultaneous Determination of Trace Metals in Water by ICP-AES

Quantification of Pb, Cd and Hg in Waste Rare Earth Phosphors from Abandoned Fluorescent Lamps and Cathode Ray Tubes by ICP-OES

Determination of rare earth element in gold placer by ICP-MS

The determination of phosphate in rocks and iron ores using inductively coupled plasma with optical emission spectroscopy (ICP-OES)

Determination of Rare Earth Elements in Geological Samples by Inductively Coupled Plasma Atomic Emission Spectrometry with Flow Injection Liquid-Liquid Extraction

ICP-AES Determination of Lead,Arsenic,Cadmium and Mercury in Lead Concentrates with Microwave Assisted Sample Digestion

Determination of Lead and Arsenic Contents in Amylum by ICP-AES Methodology

Study on determination of multi elements in galena by inductively coupled plasma atomic emission spectrometry

The Method of Determination Nine Kinds Elements in Sphalerite by ICP-AES

ICP-OES Determination of trace Ga,In,Bi,Sn and Pb preconcentrated by macroporous poly(vinylethylenediamine) chelating resin

Determination of Ultra Trace Rare Earth Elements in of Pig's Bone and Teeth by ICP-AES

Simultaneous Determination of Copper, Cadmium and Cobalt in Zinc Electrolyte by Inductively Coupled Plasma Atomic Emission Spectrometry

Determination of Sn, W, Ti and Other Elements in Polymetallic Ore by Inductively Coupled Plasma-Optical Emission Spectrometry with Sodium Peroxide Fusion

Determination of RE Content in Phosphate Ores Bearing Rare Earth with Azo Reagents